- Home/
- Comparison/
- Attached Equipment/
- JCB 408ZX vs. Caterpillar 924G
JCB 408ZX vs. Caterpillar 924G
7 reasons to buy JCB 408ZX:
Sizes
Maximum lifting height | 3021 mm and 1790 mm | 41 % more or 1231 mm |
Operation
Transmission fluid volume | 85 l. and 23 l. | 73 % more or 62 l. |
Turn radius | 3605.8 mm and 5070 mm | 29 % less or 1464.2 mm |
Static bucket tipping load | 3089 kg and 8286 kg | 63 % less or 5197 kg |
Static tipping forks load | 1819.4 kg and 6209 kg | 71 % less or 4389.6 kg |
Hydraulic system
Lifting time | 5 sec and 5.1 sec | 2 % less or 0.1 sec |
Gear box
Maximum reverse gear | 30 km/h and 22 km/h | 27 % more or 8 km/h |
18 reasons to buy Caterpillar 924G:
Sizes
Clearance | 436 mm and 410 mm | 6 % more or 26 mm |
Unloading ground clearance at maximum lifting | 2828 mm and 2517 mm | 11 % more or 311 mm |
Radius at maximum height and unloading | 992 mm and 612 mm | 38 % more or 380 mm |
Operation
Fuel Capacity | 225 l. and 100 l. | 56 % more or 125 l. |
Front differential fluid volume | 21 l. and 9.5 l. | 55 % more or 11.5 l. |
Cooling system fluid volume | 40 l. and 15.5 l. | 61 % more or 24.5 l. |
Rear differential fluid volume | 21 l. and 10.5 l. | 50 % more or 10.5 l. |
Engine oil volume | 20 l. and 9.4 l. | 53 % more or 10.6 l. |
Hydraulic system fluid volume | 125 l. and 85.2 l. | 32 % more or 39.8 l. |
Generator current strength | 80 amperes and 75 amperes | 6 % more or 5 amperes |
Motor
Full power | 103 kW and 55.9 kW | 46 % more or 47.1 kW |
Effective power | 97 kW and 50 kW | 48 % more or 47 kW |
Displacement | 6 l. and 4.4 l. | 27 % more or 1.6 l. |
Hydraulic system
Pump bandwidth | 1152 l/min and 66 l/min | 94 % more or 1086 l/min |
Lowering time | 2.4 sec and 3.2 sec | 25 % less or 0.8 sec |
Gear box
Forward gears number | 4 and 2 | 50 % more or 2 |
Reverse gears number | 3 and 2 | 33 % more or 1 |
Maximum forward speed | 39 km/h and 30 km/h | 23 % more or 9 km/h |
Neutral reasons:
Sizes
Length with bucket on ground level | 5000 mm and 7168 mm |
Fork tines length | 1200 mm and 1200 mm |
Between tyres width | 1752.6 mm and 2356 mm |
Height to cab upper part | 2615.2 mm and 3227 mm |
Wheelbase | 2000 mm and 2800 mm |
Hinge axis maximum height | 3142 mm and 3881 mm |
Operation
Working weight | 4840 kg and 11340 kg |
Operating voltage | 12 V and 24 V |
Rear axle oscillating | 9 degrees and 12 degrees |
Tyre size | 12.5x20 and 17.5-25 |
Motor
Manufacturer | JCB and Caterpillar |
Model | 1104C-44 and 3056E DIT ATAAC |
Hydraulic system
Type of pump | gear type pump and axial piston pump with variable displacement |
Overflow valve pressure | 22001.2 kPa and 25900 kPa |
Gear box
Transmission type | Hydro-Static Transmission and intermediate type |
Images
Sizes
5. Clearance | 410 mm | 5. Clearance | 436 mm |
6. Hinge axis maximum height | 3142 mm | 6. Hinge axis maximum height | 3881 mm |
7. Unloading ground clearance at maximum lifting | 2517 mm | 7. Unloading ground clearance at maximum lifting | 2828 mm |
9. Fork tines length | 1200 mm | 9. Fork tines length | 1200 mm |
11. Maximum lifting height | 3021 mm | 11. Maximum lifting height | 1790 mm |
1. Length with bucket on ground level | 5000 mm | 1. Length with bucket on ground level | 7168 mm |
2. Between tyres width | 1752.6 mm | 2. Between tyres width | 2356 mm |
3. Height to cab upper part | 2615.2 mm | 3. Height to cab upper part | 3227 mm |
4. Wheelbase | 2000 mm | 4. Wheelbase | 2800 mm |