- Home/
- Comparison/
- Attached Equipment/
- JCB 408ZX vs. JCB 411HT High-Lift
JCB 408ZX vs. JCB 411HT High-Lift
7 reasons to buy JCB 408ZX:
Operation
Transmission fluid volume | 85 l. and 26.9 l. | 68 % more or 58.1 l. |
Turn radius | 3605.8 mm and 5462 mm | 34 % less or 1856.2 mm |
Generator current strength | 75 amperes and 55 amperes | 27 % more or 20 amperes |
Static bucket tipping load | 3089 kg and 5830 kg | 47 % less or 2741 kg |
Static tipping forks load | 1819.4 kg and 4094.6 kg | 56 % less or 2275.2 kg |
Hydraulic system
Lowering time | 3.2 sec and 3.7 sec | 14 % less or 0.5 sec |
Gear box
Maximum reverse gear | 30 km/h and 27.5 km/h | 8 % more or 2.5 km/h |
18 reasons to buy JCB 411HT High-Lift:
Sizes
Radius at maximum height and unloading | 959 mm and 612 mm | 36 % more or 347 mm |
Fork tines length | 1220 mm and 1200 mm | 2 % more or 20 mm |
Maximum lifting height | 3459 mm and 3021 mm | 13 % more or 438 mm |
Unloading ground clearance at maximum lifting | 2758 mm and 2517 mm | 9 % more or 241 mm |
Operation
Rear differential fluid volume | 25 l. and 10.5 l. | 58 % more or 14.5 l. |
Engine oil volume | 11.4 l. and 9.4 l. | 18 % more or 2.0 l. |
Hydraulic system fluid volume | 109.8 l. and 85.2 l. | 22 % more or 24.6 l. |
Front differential fluid volume | 25 l. and 9.5 l. | 62 % more or 15.5 l. |
Fuel Capacity | 124.9 l. and 100 l. | 20 % more or 24.9 l. |
Cooling system fluid volume | 23 l. and 15.5 l. | 33 % more or 7.5 l. |
Motor
Full power | 74.6 kW and 55.9 kW | 25 % more or 18.7 kW |
Effective power | 69.2 kW and 50 kW | 28 % more or 19.2 kW |
Power measured at | 2200 rev / min and 2000 rev / min | 9 % more or 200 rev |
Maximum torque | 424.4 Nm and 302.3 Nm | 29 % more or 122.1 Nm |
Hydraulic system
Pump bandwidth | 390 l/min and 66 l/min | 83 % more or 324 l/min |
Gear box
Forward gears number | 4 and 2 | 50 % more or 2 |
Reverse gears number | 3 and 2 | 33 % more or 1 |
Maximum forward speed | 37.5 km/h and 30 km/h | 20 % more or 7.5 km/h |
Neutral reasons:
Sizes
Between tyres width | 1752.6 mm and 2203 mm |
Height to cab upper part | 2615.2 mm and 3078 mm |
Wheelbase | 2000 mm and 2700 mm |
Clearance | 410 mm and 410 mm |
Hinge axis maximum height | 3142 mm and 3621 mm |
Length with bucket on ground level | 5000 mm and 6090 mm |
Operation
Operating voltage | 12 V and 24 V |
Rear axle oscillating | 9 degrees and 12.5 degrees |
Tyre size | 12.5x20 and 15.5R25 XHA (L3) |
Working weight | 4840 kg and 8733 kg |
Motor
Manufacturer | JCB and JCB |
Model | 1104C-44 and diesel |
Torque measured at | 1400 rev / min and 1400 rev / min |
Displacement | 4.4 l. and 4.4 l. |
Aspiration | natural aspiration and turbocharging |
Hydraulic system
Lifting time | 5 sec and 5 sec |
Type of pump | gear type pump and dual gear type pump |
Overflow valve pressure | 22001.2 kPa and 21994.3 kPa |
Gear box
Transmission type | Hydro-Static Transmission and smooth power shifting |
Images
Sizes
1. Length with bucket on ground level | 5000 mm | 1. Length with bucket on ground level | 6090 mm |
2. Between tyres width | 1752.6 mm | 2. Between tyres width | 2203 mm |
3. Height to cab upper part | 2615.2 mm | 3. Height to cab upper part | 3078 mm |
4. Wheelbase | 2000 mm | 4. Wheelbase | 2700 mm |
5. Clearance | 410 mm | 5. Clearance | 410 mm |
6. Hinge axis maximum height | 3142 mm | 6. Hinge axis maximum height | 3621 mm |
7. Unloading ground clearance at maximum lifting | 2517 mm | 7. Unloading ground clearance at maximum lifting | 2758 mm |
9. Fork tines length | 1200 mm | 9. Fork tines length | 1220 mm |
11. Maximum lifting height | 3021 mm | 11. Maximum lifting height | 3459 mm |