vs.

      JCB 408ZX vs. John Deere 444H

      7 reasons to buy JCB 408ZX:

      Sizes

      Clearance 410 mm and 355 mm 13 % more or 55 mm

      Operation

      Generator current strength 75 amperes and 55 amperes 27 % more or 20 amperes
      Turn radius 3605.8 mm and 4703 mm 23 % less or 1097.2 mm
      Static bucket tipping load 3089 kg and 7267 kg 57 % less or 4178 kg
      Static tipping forks load 1819.4 kg and 4364 kg 58 % less or 2544.6 kg
      Transmission fluid volume 85 l. and 12.5 l. 85 % more or 72.5 l.

      Gear box

      Maximum reverse gear 30 km/h and 26.3 km/h 12 % more or 3.7 km/h

      20 reasons to buy John Deere 444H:

      Sizes

      Unloading ground clearance at maximum lifting 2638 mm and 2517 mm 5 % more or 121 mm
      Radius at maximum height and unloading 1095 mm and 612 mm 44 % more or 483 mm
      Fork tines length 1220 mm and 1200 mm 2 % more or 20 mm
      Maximum lifting height 3406 mm and 3021 mm 11 % more or 385 mm

      Operation

      Rear differential fluid volume 15 l. and 10.5 l. 30 % more or 4.5 l.
      Hydraulic system fluid volume 106 l. and 85.2 l. 20 % more or 20.8 l.
      Fuel Capacity 180 l. and 100 l. 44 % more or 80 l.
      Cooling system fluid volume 19 l. and 15.5 l. 18 % more or 3.5 l.
      Engine oil volume 12.5 l. and 9.4 l. 25 % more or 3.1 l.
      Front differential fluid volume 15 l. and 9.5 l. 37 % more or 5.5 l.

      Motor

      Full power 86 kW and 55.9 kW 35 % more or 30.1 kW
      Effective power 82 kW and 50 kW 39 % more or 32 kW
      Power measured at 2200 rev / min and 2000 rev / min 9 % more or 200 rev
      Maximum torque 441 Nm and 302.3 Nm 31 % more or 138.7 Nm
      Displacement 4.5 l. and 4.4 l. 2 % more or 0.1 l.

      Hydraulic system

      Lowering time 2.6 sec and 3.2 sec 19 % less or 0.6 sec
      Pump bandwidth 136.3 l/min and 66 l/min 52 % more or 70.3 l/min

      Gear box

      Forward gears number 4 and 2 50 % more or 2
      Reverse gears number 3 and 2 33 % more or 1
      Maximum forward speed 40 km/h and 30 km/h 25 % more or 10 km/h

      Neutral reasons:

      Sizes

      Wheelbase 2000 mm and 2750 mm
      Hinge axis maximum height 3142 mm and 3605 mm
      Length with bucket on ground level 5000 mm and 6730 mm
      Between tyres width 1752.6 mm and 2330 mm
      Height to cab upper part 2615.2 mm and 3125 mm

      Operation

      Operating voltage 12 V and 24 V
      Rear axle oscillating 9 degrees and 24 degrees
      Tyre size 12.5x20 and 17.5-25
      Working weight 4840 kg and 9733 kg

      Motor

      Manufacturer JCB and John Deere
      Model 1104C-44 and 4045T
      Torque measured at 1400 rev / min and 1400 rev / min
      Aspiration natural aspiration and turbocharging

      Hydraulic system

      Overflow valve pressure 22001.2 kPa and 24850 kPa
      Lifting time 5 sec and 5 sec
      Type of pump gear type pump and piston pump

      Gear box

      Transmission type Hydro-Static Transmission and powershift

      Images

      Sizes

      5. Clearance 410 mm 5. Clearance 355 mm
      6. Hinge axis maximum height 3142 mm 6. Hinge axis maximum height 3605 mm
      7. Unloading ground clearance at maximum lifting 2517 mm 7. Unloading ground clearance at maximum lifting 2638 mm
      9. Fork tines length 1200 mm 9. Fork tines length 1220 mm
      11. Maximum lifting height 3021 mm 11. Maximum lifting height 3406 mm
      1. Length with bucket on ground level 5000 mm 1. Length with bucket on ground level 6730 mm
      2. Between tyres width 1752.6 mm 2. Between tyres width 2330 mm
      3. Height to cab upper part 2615.2 mm 3. Height to cab upper part 3125 mm
      4. Wheelbase 2000 mm 4. Wheelbase 2750 mm