- Home/
- Comparison/
- Attached Equipment/
- JCB 409ZX vs. John Deere TC44H
JCB 409ZX vs. John Deere TC44H
6 reasons to buy JCB 409ZX:
Sizes
Clearance | 410 mm and 355 mm | 13 % more or 55 mm |
Shovel
Breakout power | 48.2 kN and 7988 kN | 99 % less or 7939.8 kN |
Operation
Generator current strength | 75 amperes and 55 amperes | 27 % more or 20 amperes |
Static bucket tipping load | 4169 kg and 5983 kg | 30 % less or 1814 kg |
Static tipping forks load | 3044 kg and 4687 kg | 35 % less or 1643 kg |
Turn radius | 3670 mm and 4703 mm | 22 % less or 1033 mm |
21 reasons to buy John Deere TC44H:
Sizes
Unloading ground clearance at maximum lifting | 2676 mm and 2512 mm | 6 % more or 164 mm |
Radius at maximum height and unloading | 1258 mm and 634 mm | 50 % more or 624 mm |
Fork tines length | 1220 mm and 1200 mm | 2 % more or 20 mm |
Maximum lifting height | 3490 mm and 3044 mm | 13 % more or 446 mm |
Operation
Fuel Capacity | 180 l. and 100 l. | 44 % more or 80 l. |
Cooling system fluid volume | 19 l. and 15.5 l. | 18 % more or 3.5 l. |
Engine oil volume | 12.5 l. and 9.4 l. | 25 % more or 3.1 l. |
Front differential fluid volume | 15 l. and 9.5 l. | 37 % more or 5.5 l. |
Rear differential fluid volume | 15 l. and 10.5 l. | 30 % more or 4.5 l. |
Hydraulic system fluid volume | 106 l. and 85 l. | 20 % more or 21 l. |
Motor
Effective power | 82 kW and 50 kW | 39 % more or 32 kW |
Displacement | 4.5 l. and 4.4 l. | 2 % more or 0.1 l. |
Power measured at | 2200 rev / min and 2000 rev / min | 9 % more or 200 rev |
Maximum torque | 441 Nm and 302.3 Nm | 31 % more or 138.7 Nm |
Full power | 86 kW and 55.9 kW | 35 % more or 30.1 kW |
Hydraulic system
Lowering time | 2.3 sec and 3.2 sec | 28 % less or 0.9 sec |
Pump bandwidth | 136.3 l/min and 66 l/min | 52 % more or 70.3 l/min |
Gear box
Forward gears number | 4 and 2 | 50 % more or 2 |
Reverse gears number | 3 and 2 | 33 % more or 1 |
Maximum forward speed | 40 km/h and 20 km/h | 50 % more or 20 km/h |
Maximum reverse gear | 26.3 km/h and 20 km/h | 24 % more or 6.3 km/h |
Neutral reasons:
Sizes
Hinge axis maximum height | 3165 mm and 3682 mm |
Length with bucket on ground level | 5070 mm and 6969 mm |
Height to cab upper part | 2660 mm and 3125 mm |
Wheelbase | 2000 mm and 2750 mm |
Operation
Operating voltage | 12 V and 24 V |
Rear axle oscillating | 9 degrees and 24 degrees |
Working weight | 5248.5 kg and 10212 kg |
Tyre size | 14.5x20 and 17.5-25 |
Motor
Aspiration | natural aspiration and turbocharging |
Torque measured at | 1400 rev / min and 1400 rev / min |
Cylinders number | 4 and 4 |
Manufacturer | JCB and John Deere |
Model | 1104C-44 and 4045T |
Hydraulic system
Type of pump | gear type pump and piston pump |
Overflow valve pressure | 1516.8 kPa and 24850 kPa |
Lifting time | 5 sec and 5 sec |
Gear box
Transmission type | Hydro-Static Transmission and powershift |
Images
Sizes
1. Length with bucket on ground level | 5070 mm | 1. Length with bucket on ground level | 6969 mm |
3. Height to cab upper part | 2660 mm | 3. Height to cab upper part | 3125 mm |
4. Wheelbase | 2000 mm | 4. Wheelbase | 2750 mm |
5. Clearance | 410 mm | 5. Clearance | 355 mm |
6. Hinge axis maximum height | 3165 mm | 6. Hinge axis maximum height | 3682 mm |
7. Unloading ground clearance at maximum lifting | 2512 mm | 7. Unloading ground clearance at maximum lifting | 2676 mm |
9. Fork tines length | 1200 mm | 9. Fork tines length | 1220 mm |
11. Maximum lifting height | 3044 mm | 11. Maximum lifting height | 3490 mm |