- Home/
- Comparison/
- Attached Equipment/
- JCB 411HT High-Lift vs. Michigan L90-I
JCB 411HT High-Lift vs. Michigan L90-I
9 reasons to buy JCB 411HT High-Lift:
Sizes
Clearance | 410 mm and 400 mm | 2 % more or 10 mm |
Shovel
Breakout power | 73.2 kN and 119.9 kN | 39 % less or 46.7 kN |
Operation
Turn radius | 5462 mm and 5910 mm | 8 % less or 448 mm |
Generator current strength | 55 amperes and 45 amperes | 18 % more or 10 amperes |
Static bucket tipping load | 5830 kg and 9290 kg | 37 % less or 3460 kg |
Static tipping forks load | 4094.6 kg and 5000 kg | 18 % less or 905.4 kg |
Hydraulic system
Lifting time | 5 sec and 6.4 sec | 22 % less or 1.4 sec |
Unloading time | 1.1 sec and 1.5 sec | 27 % less or 0.4 sec |
Gear box
Maximum forward speed | 37.5 km/h and 32.7 km/h | 13 % more or 4.8 km/h |
21 reasons to buy Michigan L90-I:
Sizes
Unloading ground clearance at maximum lifting | 2810 mm and 2758 mm | 2 % more or 52 mm |
Radius at maximum height and unloading | 1050 mm and 959 mm | 9 % more or 91 mm |
Fork tines length | 1225 mm and 1220 mm | 0 % more or 5 mm |
Maximum lifting height | 3675 mm and 3459 mm | 6 % more or 216 mm |
Shovel
Bucket capacity with top | 2.1 m3 and 1.2 m3 | 43 % more or 0.9 m3 |
Brimmed bucket capacity | 1.7 m3 and 1 m3 | 41 % more or 0.7 m3 |
Operation
Front differential fluid volume | 27.5 l. and 25 l. | 9 % more or 2.5 l. |
Rear differential fluid volume | 27.5 l. and 25 l. | 9 % more or 2.5 l. |
Hydraulic system fluid volume | 193 l. and 109.8 l. | 43 % more or 83.2 l. |
Fuel Capacity | 200 l. and 124.9 l. | 38 % more or 75.1 l. |
Cooling system fluid volume | 38 l. and 23 l. | 39 % more or 15 l. |
Engine oil volume | 15 l. and 11.4 l. | 24 % more or 3.6 l. |
Transmission fluid volume | 35 l. and 26.9 l. | 23 % more or 8.1 l. |
Motor
Displacement | 5.9 l. and 4.4 l. | 25 % more or 1.5 l. |
Full power | 108.1 kW and 74.6 kW | 31 % more or 33.5 kW |
Maximum torque | 556 Nm and 424.4 Nm | 24 % more or 131.6 Nm |
Torque measured at | 1500 rev / min and 1400 rev / min | 7 % more or 100 rev |
Cylinders number | 6 and 4 | 33 % more or 2 |
Hydraulic system
Lowering time | 3.5 sec and 3.7 sec | 5 % less or 0.2 sec |
Gear box
Reverse gears number | 4 and 3 | 25 % more or 1 |
Maximum reverse gear | 32.7 km/h and 27.5 km/h | 16 % more or 5.2 km/h |
Neutral reasons:
Sizes
Between tyres width | 2203 mm and 2525 mm |
Height to cab upper part | 3078 mm and 3050 mm |
Wheelbase | 2700 mm and 3000 mm |
Hinge axis maximum height | 3621 mm and 3835 mm |
Length with bucket on ground level | 6090 mm and 7180 mm |
Operation
Tyre size | 15.5R25 XHA (L3) and 20.5-25 |
Working weight | 8733 kg and 12550 kg |
Operating voltage | 24 V and 24 V |
Rear axle oscillating | 12.5 degrees and 30 degrees |
Motor
Aspiration | turbocharging and turbocharging |
Manufacturer | JCB and Cummins |
Model | diesel and 6 BT 5.9 |
Power measured at | 2200 rev / min and 2200 rev / min |
Hydraulic system
Overflow valve pressure | 21994.3 kPa and 20477.4 kPa |
Gear box
Transmission type | smooth power shifting and Clark C270 powershift |
Forward gears number | 4 and 4 |
Images
Sizes
1. Length with bucket on ground level | 6090 mm | 1. Length with bucket on ground level | 7180 mm |
2. Between tyres width | 2203 mm | 2. Between tyres width | 2525 mm |
3. Height to cab upper part | 3078 mm | 3. Height to cab upper part | 3050 mm |
4. Wheelbase | 2700 mm | 4. Wheelbase | 3000 mm |
5. Clearance | 410 mm | 5. Clearance | 400 mm |
6. Hinge axis maximum height | 3621 mm | 6. Hinge axis maximum height | 3835 mm |
7. Unloading ground clearance at maximum lifting | 2758 mm | 7. Unloading ground clearance at maximum lifting | 2810 mm |
9. Fork tines length | 1220 mm | 9. Fork tines length | 1225 mm |
11. Maximum lifting height | 3459 mm | 11. Maximum lifting height | 3675 mm |