- Home/
- Comparison/
- Attached Equipment/
- JCB 411ZX vs. JCB 426ZX
JCB 411ZX vs. JCB 426ZX
5 reasons to buy JCB 411ZX:
Operation
Generator current strength | 75 amperes and 70 amperes | 7 % more or 5 amperes |
Static bucket tipping load | 3089 kg and 10502 kg | 71 % less or 7413 kg |
Static tipping forks load | 4170 kg and 7722 kg | 46 % less or 3552 kg |
Transmission fluid volume | 85 l. and 26.5 l. | 69 % more or 58.5 l. |
Turn radius | 3605.8 mm and 5791.2 mm | 38 % less or 2185.4 mm |
23 reasons to buy JCB 426ZX:
Sizes
Unloading ground clearance at maximum lifting | 2962 mm and 2512 mm | 15 % more or 450 mm |
Radius at maximum height and unloading | 946 mm and 634 mm | 33 % more or 312 mm |
Fork tines length | 1220 mm and 1200 mm | 2 % more or 20 mm |
Clearance | 442 mm and 410 mm | 7 % more or 32 mm |
Maximum lifting height | 3695 mm and 3021 mm | 18 % more or 674 mm |
Operation
Fuel Capacity | 230.9 l. and 100 l. | 57 % more or 130.9 l. |
Cooling system fluid volume | 34.1 l. and 15.5 l. | 55 % more or 18.6 l. |
Engine oil volume | 14 l. and 9.4 l. | 33 % more or 4.6 l. |
Front differential fluid volume | 39 l. and 9.5 l. | 76 % more or 29.5 l. |
Rear differential fluid volume | 37.1 l. and 10.5 l. | 72 % more or 26.6 l. |
Hydraulic system fluid volume | 208.2 l. and 85.2 l. | 59 % more or 123.0 l. |
Motor
Displacement | 6.7 l. and 4.4 l. | 34 % more or 2.3 l. |
Full power | 123 kW and 55.9 kW | 55 % more or 67.1 kW |
Effective power | 113.3 kW and 50 kW | 56 % more or 63.3 kW |
Power measured at | 2200 rev / min and 2000 rev / min | 9 % more or 200 rev |
Maximum torque | 732.1 Nm and 302.3 Nm | 59 % more or 429.8 Nm |
Hydraulic system
Pump bandwidth | 264 l/min and 66 l/min | 75 % more or 198 l/min |
Lifting time | 4.4 sec and 5 sec | 12 % less or 0.6 sec |
Lowering time | 2.7 sec and 3.2 sec | 16 % less or 0.5 sec |
Gear box
Forward gears number | 4 and 2 | 50 % more or 2 |
Reverse gears number | 3 and 2 | 33 % more or 1 |
Maximum forward speed | 37.8 km/h and 20 km/h | 47 % more or 17.8 km/h |
Maximum reverse gear | 25.1 km/h and 20 km/h | 20 % more or 5.1 km/h |
Neutral reasons:
Sizes
Hinge axis maximum height | 3165 mm and 3906 mm |
Length with bucket on ground level | 5070 mm and 6831 mm |
Between tyres width | 1900 mm and 2482 mm |
Height to cab upper part | 2660 mm and 3335 mm |
Wheelbase | 2000 mm and 3000 mm |
Operation
Operating voltage | 12 V and 24 V |
Working weight | 5250 kg and 13229.9 kg |
Rear axle oscillating | 9 degrees and 21 degrees |
Motor
Aspiration | natural aspiration and Turbocharger with wastegate |
Torque measured at | 1400 rev / min and 1400 rev / min |
Model | 1104C-44 and QB6.7 |
Hydraulic system
Type of pump | gear type pump and twin variable displacement piston pumps |
Overflow valve pressure | 22001.2 kPa and 24993.5 kPa |
Gear box
Transmission type | Hydro-Static Transmission and smooth power shifting ZF 4WG 160 |
Images
Sizes
7. Unloading ground clearance at maximum lifting | 2512 mm | 7. Unloading ground clearance at maximum lifting | 2962 mm |
9. Fork tines length | 1200 mm | 9. Fork tines length | 1220 mm |
11. Maximum lifting height | 3021 mm | 11. Maximum lifting height | 3695 mm |
1. Length with bucket on ground level | 5070 mm | 1. Length with bucket on ground level | 6831 mm |
2. Between tyres width | 1900 mm | 2. Between tyres width | 2482 mm |
3. Height to cab upper part | 2660 mm | 3. Height to cab upper part | 3335 mm |
4. Wheelbase | 2000 mm | 4. Wheelbase | 3000 mm |
5. Clearance | 410 mm | 5. Clearance | 442 mm |
6. Hinge axis maximum height | 3165 mm | 6. Hinge axis maximum height | 3906 mm |