vs.

      JCB 414S vs. JCB 456HT Ultrahigh Lift

      11 reasons to buy JCB 414S:

      Shovel

      Breakout power 53.8 kN and 152 kN 65 % less or 98.2 kN

      Operation

      Turn radius 5610 mm and 7121 mm 21 % less or 1511 mm
      Static bucket tipping load 5191 kg and 9493 kg 45 % less or 4302 kg
      Static tipping forks load 3893 kg and 8314 kg 53 % less or 4421 kg

      Motor

      Torque measured at 1600 rev / min and 1400 rev / min 12 % more or 200 rev

      Hydraulic system

      Lowering time 3 sec and 4.1 sec 27 % less or 1.1 sec
      Pump bandwidth 430 l/min and 326 l/min 24 % more or 104 l/min
      Lifting time 4.6 sec and 5.8 sec 21 % less or 1.2 sec

      Gear box

      Forward gears number 6 and 4 33 % more or 2
      Maximum forward speed 38 km/h and 37.4 km/h 2 % more or 0.6 km/h
      Maximum reverse gear 26.8 km/h and 24.4 km/h 9 % more or 2.4 km/h

      18 reasons to buy JCB 456HT Ultrahigh Lift:

      Sizes

      Clearance 470 mm and 355 mm 24 % more or 115 mm
      Unloading ground clearance at maximum lifting 4034 mm and 2789 mm 31 % more or 1245 mm
      Radius at maximum height and unloading 1277 mm and 957 mm 25 % more or 320 mm
      Maximum lifting height 5160 mm and 3514 mm 32 % more or 1646 mm

      Shovel

      Bucket capacity with top 3.3 m3 and 1.4 m3 58 % more or 1.9 m3
      Brimmed bucket capacity 2.6 m3 and 1.2 m3 54 % more or 1.4 m3

      Operation

      Fuel Capacity 320 l. and 140 l. 56 % more or 180 l.
      Cooling system fluid volume 40 l. and 21.5 l. 46 % more or 18.5 l.
      Engine oil volume 18.9 l. and 14 l. 26 % more or 4.9 l.
      Transmission fluid volume 34 l. and 27.5 l. 19 % more or 6.5 l.
      Front differential fluid volume 69 l. and 23 l. 67 % more or 46 l.
      Rear differential fluid volume 51 l. and 23 l. 55 % more or 28 l.
      Hydraulic system fluid volume 215 l. and 130 l. 40 % more or 85 l.

      Motor

      Full power 160.3 kW and 113.3 kW 29 % more or 47.0 kW
      Effective power 154.4 kW and 111.9 kW 28 % more or 42.5 kW
      Maximum torque 915.2 Nm and 617 Nm 33 % more or 298.2 Nm
      Displacement 8.3 l. and 5.9 l. 29 % more or 2.4 l.

      Hydraulic system

      Unloading time 1.2 sec and 1.4 sec 14 % less or 0.2 sec

      Neutral reasons:

      Sizes

      Wheelbase 2800 mm and 3300 mm
      Between tyres width 2450 mm and 2702 mm
      Height to cab upper part 2971 mm and 3370 mm
      Hinge axis maximum height 3681 mm and 5270 mm
      Length with bucket on ground level 6490 mm and 9450 mm
      Fork tines length 1220 mm and 1220 mm

      Operation

      Operating voltage 24 V and 24 V
      Working weight 10235 kg and 21043 kg
      Generator current strength 70 amperes and 70 amperes
      Rear axle oscillating 25 degrees and 25 degrees
      Tyre size 19.5LR24 XM27 and Michelin 23.5R25 XHA L3

      Motor

      Aspiration turbocharging and turbocharging
      Power measured at 2200 rev / min and 2200 rev / min
      Model AA5.9C and QSC 8.3

      Hydraulic system

      Type of pump dual gear type pump and twin variable displacement piston pumps
      Overflow valve pressure 23993.7 kPa and 24993.5 kPa

      Gear box

      Transmission type smooth power shifting and smooth power shifting
      Reverse gears number 3 and 3

      Images

      Sizes

      9. Fork tines length 1220 mm 9. Fork tines length 1220 mm
      11. Maximum lifting height 3514 mm 11. Maximum lifting height 5160 mm
      1. Length with bucket on ground level 6490 mm 1. Length with bucket on ground level 9450 mm
      2. Between tyres width 2450 mm 2. Between tyres width 2702 mm
      3. Height to cab upper part 2971 mm 3. Height to cab upper part 3370 mm
      4. Wheelbase 2800 mm 4. Wheelbase 3300 mm
      5. Clearance 355 mm 5. Clearance 470 mm
      6. Hinge axis maximum height 3681 mm 6. Hinge axis maximum height 5270 mm
      7. Unloading ground clearance at maximum lifting 2789 mm 7. Unloading ground clearance at maximum lifting 4034 mm