vs.

      JCB 426HT High-Lift vs. Caterpillar IT38H

      12 reasons to buy JCB 426HT High-Lift:

      Sizes

      Maximum lifting height 4148 mm and 3545 mm 15 % more or 603 mm
      Unloading ground clearance at maximum lifting 3261 mm and 2805 mm 14 % more or 456 mm
      Radius at maximum height and unloading 1243 mm and 1152 mm 7 % more or 91 mm
      Clearance 442 mm and 397 mm 10 % more or 45 mm

      Operation

      Generator current strength 70 amperes and 65 amperes 7 % more or 5 amperes
      Static bucket tipping load 8802.9 kg and 10849 kg 19 % less or 2046.1 kg
      Hydraulic system fluid volume 208.2 l. and 89 l. 57 % more or 119.2 l.
      Static tipping forks load 6586.6 kg and 8866 kg 26 % less or 2279.4 kg

      Motor

      Power measured at 2200 rev / min and 2100 rev / min 5 % more or 100 rev
      Displacement 6.7 l. and 6.6 l. 1 % more or 0.1 l.

      Hydraulic system

      Lifting time 4.4 sec and 5 sec 12 % less or 0.6 sec
      Unloading time 1 sec and 2 sec 50 % less or 1 sec

      17 reasons to buy Caterpillar IT38H:

      Sizes

      Fork tines length 1524 mm and 1220 mm 20 % more or 304 mm

      Shovel

      Breakout power 126 kN and 138 kN 9 % less or 12 kN
      Bucket capacity with top 3 m3 and 1.9 m3 37 % more or 1.1 m3
      Brimmed bucket capacity 2.3 m3 and 1.6 m3 30 % more or 0.7 m3

      Operation

      Turn radius 6068 mm and 6282 mm 3 % less or 214 mm
      Engine oil volume 17.4 l. and 14 l. 20 % more or 3.4 l.
      Transmission fluid volume 43 l. and 26.5 l. 38 % more or 16.5 l.
      Front differential fluid volume 57 l. and 39 l. 32 % more or 18 l.
      Rear differential fluid volume 53 l. and 37.1 l. 30 % more or 15.9 l.
      Fuel Capacity 247 l. and 230.9 l. 7 % more or 16.1 l.
      Cooling system fluid volume 36 l. and 34.1 l. 5 % more or 1.9 l.

      Motor

      Full power 147 kW and 123 kW 16 % more or 24 kW
      Effective power 133 kW and 113.3 kW 15 % more or 19.7 kW
      Maximum torque 840.6 Nm and 732.1 Nm 13 % more or 108.5 Nm

      Hydraulic system

      Pump bandwidth 295 l/min and 264 l/min 11 % more or 31 l/min

      Gear box

      Maximum reverse gear 25.5 km/h and 25.1 km/h 2 % more or 0.4 km/h
      Maximum forward speed 43.2 km/h and 37.8 km/h 12 % more or 5.4 km/h

      Neutral reasons:

      Sizes

      Hinge axis maximum height 4336 mm and 3933 mm
      Length with bucket on ground level 7244 mm and 7543 mm
      Between tyres width 2597 mm and 2674 mm
      Height to cab upper part 3335 mm and 3356 mm
      Wheelbase 3000 mm and 3020 mm

      Operation

      Operating voltage 24 V and 24 V
      Rear axle oscillating 21 degrees and 12 degrees
      Tyre size 20.5R25 XHA(L3) and 20.5-R25
      Working weight 13351.9 kg and 16004 kg

      Motor

      Torque measured at 1400 rev / min and 1400 rev / min
      Model QB6.7 and 6.6 Acert

      Hydraulic system

      Overflow valve pressure 24993.5 kPa and 6894.8 kPa
      Type of pump twin variable displacement piston pumps and piston pump
      Lowering time 2.7 sec and 2.7 sec

      Gear box

      Forward gears number 4 and 4
      Reverse gears number 3 and 3

      Images

      Sizes

      9. Fork tines length 1220 mm 9. Fork tines length 1524 mm
      11. Maximum lifting height 4148 mm 11. Maximum lifting height 3545 mm
      1. Length with bucket on ground level 7244 mm 1. Length with bucket on ground level 7543 mm
      2. Between tyres width 2597 mm 2. Between tyres width 2674 mm
      3. Height to cab upper part 3335 mm 3. Height to cab upper part 3356 mm
      4. Wheelbase 3000 mm 4. Wheelbase 3020 mm
      5. Clearance 442 mm 5. Clearance 397 mm
      6. Hinge axis maximum height 4336 mm 6. Hinge axis maximum height 3933 mm
      7. Unloading ground clearance at maximum lifting 3261 mm 7. Unloading ground clearance at maximum lifting 2805 mm