vs.

      JCB 436HT High-Lift vs. John Deere 244J

      21 reasons to buy JCB 436HT High-Lift:

      Sizes

      Clearance 459 mm and 295 mm 36 % more or 164 mm
      Unloading ground clearance at maximum lifting 3628 mm and 2550 mm 30 % more or 1078 mm
      Fork tines length 1220 mm and 1200 mm 2 % more or 20 mm
      Maximum lifting height 4482 mm and 3039 mm 32 % more or 1443 mm

      Operation

      Fuel Capacity 230.9 l. and 80 l. 65 % more or 150.9 l.
      Front differential fluid volume 39 l. and 4 l. 90 % more or 35 l.
      Cooling system fluid volume 34.1 l. and 10 l. 71 % more or 24.1 l.
      Rear differential fluid volume 39 l. and 4.1 l. 89 % more or 34.9 l.
      Engine oil volume 14 l. and 8.5 l. 39 % more or 5.5 l.
      Hydraulic system fluid volume 208.2 l. and 60 l. 71 % more or 148.2 l.
      Generator current strength 70 amperes and 65 amperes 7 % more or 5 amperes

      Motor

      Effective power 123 kW and 47.7 kW 61 % more or 75.3 kW
      Maximum torque 786.4 Nm and 221 Nm 72 % more or 565.4 Nm
      Cylinders number 6 and 4 33 % more or 2
      Displacement 5.9 l. and 2.4 l. 59 % more or 3.5 l.

      Hydraulic system

      Pump bandwidth 264 l/min and 64.4 l/min 76 % more or 199.6 l/min
      Unloading time 1 sec and 1.4 sec 29 % less or 0.4 sec
      Lowering time 3.4 sec and 4 sec 15 % less or 0.6 sec

      Gear box

      Reverse gears number 3 and 2 33 % more or 1
      Maximum forward speed 37.8 km/h and 30 km/h 21 % more or 7.8 km/h
      Forward gears number 4 and 2 50 % more or 2

      9 reasons to buy John Deere 244J:

      Sizes

      Radius at maximum height and unloading 1170 mm and 1044 mm 11 % more or 126 mm

      Shovel

      Breakout power 48 kN and 147 kN 67 % less or 99 kN

      Operation

      Turn radius 3505 mm and 6620 mm 47 % less or 3115 mm
      Static bucket tipping load 3836 kg and 9265.1 kg 59 % less or 5429.1 kg
      Static tipping forks load 2905 kg and 6870.6 kg 58 % less or 3965.6 kg

      Motor

      Power measured at 2600 rev / min and 2200 rev / min 15 % more or 400 rev
      Torque measured at 1600 rev / min and 1300 rev / min 19 % more or 300 rev

      Hydraulic system

      Lifting time 4.9 sec and 5.9 sec 17 % less or 1.0 sec

      Gear box

      Maximum reverse gear 30 km/h and 27 km/h 10 % more or 3 km/h

      Neutral reasons:

      Sizes

      Hinge axis maximum height 4650 mm and 3211 mm
      Length with bucket on ground level 7282 mm and 5295 mm
      Between tyres width 2597 mm and 1848 mm
      Height to cab upper part 3335 mm and 2725 mm
      Wheelbase 3000 mm and 2150 mm

      Operation

      Working weight 15373.2 kg and 5240 kg
      Operating voltage 24 V and 12 V
      Rear axle oscillating 21 degrees and 20 degrees
      Tyre size 20.5R25 XHA (L3) and 365/70R18

      Motor

      Manufacturer Cummins and John Deere
      Model BTAA 5.9C and 4024T
      Aspiration turbocharging and turbocharging

      Hydraulic system

      Type of pump twin variable displacement piston pumps and fixed-displacement gear
      Overflow valve pressure 24993.5 kPa and 21994.3 kPa

      Gear box

      Transmission type smooth power shifting and hydrostatic

      Images

      Sizes

      1. Length with bucket on ground level 7282 mm 1. Length with bucket on ground level 5295 mm
      2. Between tyres width 2597 mm 2. Between tyres width 1848 mm
      3. Height to cab upper part 3335 mm 3. Height to cab upper part 2725 mm
      4. Wheelbase 3000 mm 4. Wheelbase 2150 mm
      5. Clearance 459 mm 5. Clearance 295 mm
      6. Hinge axis maximum height 4650 mm 6. Hinge axis maximum height 3211 mm
      7. Unloading ground clearance at maximum lifting 3628 mm 7. Unloading ground clearance at maximum lifting 2550 mm
      9. Fork tines length 1220 mm 9. Fork tines length 1200 mm
      11. Maximum lifting height 4482 mm 11. Maximum lifting height 3039 mm