vs.

      JCB 456HT vs. John Deere TC62H

      20 reasons to buy JCB 456HT:

      Sizes

      Clearance 470 mm and 406 mm 14 % more or 64 mm
      Maximum lifting height 4194 mm and 3821 mm 9 % more or 373 mm
      Unloading ground clearance at maximum lifting 3069 mm and 2907 mm 5 % more or 162 mm

      Shovel

      Bucket capacity with top 3.3 m3 and 2.7 m3 18 % more or 0.6 m3
      Brimmed bucket capacity 2.6 m3 and 2.3 m3 12 % more or 0.3 m3

      Operation

      Transmission fluid volume 34 l. and 27 l. 21 % more or 7 l.
      Front differential fluid volume 69 l. and 27 l. 61 % more or 42 l.
      Rear differential fluid volume 51 l. and 21 l. 59 % more or 30 l.
      Fuel Capacity 320 l. and 265 l. 17 % more or 55 l.
      Hydraulic system fluid volume 215 l. and 117 l. 46 % more or 98 l.
      Cooling system fluid volume 40 l. and 22 l. 45 % more or 18 l.
      Generator current strength 70 amperes and 55 amperes 21 % more or 15 amperes

      Motor

      Displacement 8.3 l. and 6.8 l. 18 % more or 1.5 l.
      Full power 160.3 kW and 128.3 kW 20 % more or 32.0 kW
      Effective power 154.4 kW and 119 kW 23 % more or 35.4 kW
      Maximum torque 915.2 Nm and 785 Nm 14 % more or 130.2 Nm
      Torque measured at 1500 rev / min and 1300 rev / min 13 % more or 200 rev

      Hydraulic system

      Pump bandwidth 326 l/min and 208.2 l/min 36 % more or 117.8 l/min
      Unloading time 1.2 sec and 1.7 sec 29 % less or 0.5 sec

      Gear box

      Maximum reverse gear 24.4 km/h and 23.9 km/h 2 % more or 0.5 km/h

      8 reasons to buy John Deere TC62H:

      Sizes

      Radius at maximum height and unloading 1278 mm and 1220 mm 5 % more or 58 mm

      Shovel

      Breakout power 120.5 kN and 150 kN 20 % less or 29.5 kN

      Operation

      Engine oil volume 20 l. and 18.9 l. 5 % more or 1.1 l.
      Turn radius 5187 mm and 6630 mm 22 % less or 1443 mm
      Static bucket tipping load 9755 kg and 14493 kg 33 % less or 4738 kg
      Static tipping forks load 7546 kg and 11281 kg 33 % less or 3735 kg

      Hydraulic system

      Lowering time 3 sec and 4.1 sec 27 % less or 1.1 sec

      Gear box

      Maximum forward speed 39.5 km/h and 37.4 km/h 5 % more or 2.1 km/h

      Neutral reasons:

      Sizes

      Height to cab upper part 3370 mm and 3300 mm
      Between tyres width 2702 mm and 2615 mm
      Wheelbase 3300 mm and 3003 mm
      Fork tines length 1220 mm and 1220 mm
      Hinge axis maximum height 4304 mm and 4005 mm
      Length with bucket on ground level 8520 mm and 7671 mm

      Operation

      Tyre size Michelin 23.5R25 XHA L3 and 20.5-25
      Working weight 20143 kg and 13849 kg
      Operating voltage 24 V and 24 V
      Rear axle oscillating 25 degrees and 26 degrees

      Motor

      Aspiration turbocharging and Turbocharging with subsequent air cooling (by a cooling radiator)
      Model QSC 8.3 and 6068H
      Power measured at 2200 rev / min and 2200 rev / min
      Cylinders number 6 and 6

      Hydraulic system

      Type of pump twin variable displacement piston pumps and piston pump
      Overflow valve pressure 24993.5 kPa and 24850 kPa
      Lifting time 5.8 sec and 5.8 sec

      Gear box

      Transmission type smooth power shifting and powershift
      Forward gears number 4 and 4
      Reverse gears number 3 and 3

      Images

      Sizes

      6. Hinge axis maximum height 4304 mm 6. Hinge axis maximum height 4005 mm
      7. Unloading ground clearance at maximum lifting 3069 mm 7. Unloading ground clearance at maximum lifting 2907 mm
      9. Fork tines length 1220 mm 9. Fork tines length 1220 mm
      11. Maximum lifting height 4194 mm 11. Maximum lifting height 3821 mm
      1. Length with bucket on ground level 8520 mm 1. Length with bucket on ground level 7671 mm
      2. Between tyres width 2702 mm 2. Between tyres width 2615 mm
      3. Height to cab upper part 3370 mm 3. Height to cab upper part 3300 mm
      4. Wheelbase 3300 mm 4. Wheelbase 3003 mm
      5. Clearance 470 mm 5. Clearance 406 mm