- Home/
- Comparison/
- Attached Equipment/
- John Deere 244J vs. Caterpillar IT38H
John Deere 244J vs. Caterpillar IT38H
10 reasons to buy John Deere 244J:
Sizes
Radius at maximum height and unloading | 1170 mm and 1152 mm | 2 % more or 18 mm |
Shovel
Breakout power | 48 kN and 126 kN | 62 % less or 78 kN |
Operation
Turn radius | 3505 mm and 6068 mm | 42 % less or 2563 mm |
Static bucket tipping load | 3836 kg and 10849 kg | 65 % less or 7013 kg |
Static tipping forks load | 2905 kg and 8866 kg | 67 % less or 5961 kg |
Motor
Power measured at | 2600 rev / min and 2100 rev / min | 19 % more or 500 rev |
Torque measured at | 1600 rev / min and 1400 rev / min | 12 % more or 200 rev |
Hydraulic system
Lifting time | 4.9 sec and 5 sec | 2 % less or 0.1 sec |
Unloading time | 1.4 sec and 2 sec | 30 % less or 0.6 sec |
Gear box
Maximum reverse gear | 30 km/h and 25.5 km/h | 15 % more or 4.5 km/h |
18 reasons to buy Caterpillar IT38H:
Sizes
Fork tines length | 1524 mm and 1200 mm | 21 % more or 324 mm |
Maximum lifting height | 3545 mm and 3039 mm | 14 % more or 506 mm |
Unloading ground clearance at maximum lifting | 2805 mm and 2550 mm | 9 % more or 255 mm |
Clearance | 397 mm and 295 mm | 26 % more or 102 mm |
Operation
Hydraulic system fluid volume | 89 l. and 60 l. | 33 % more or 29 l. |
Front differential fluid volume | 57 l. and 4 l. | 93 % more or 53 l. |
Rear differential fluid volume | 53 l. and 4.1 l. | 92 % more or 48.9 l. |
Fuel Capacity | 247 l. and 80 l. | 68 % more or 167 l. |
Cooling system fluid volume | 36 l. and 10 l. | 72 % more or 26 l. |
Engine oil volume | 17.4 l. and 8.5 l. | 51 % more or 8.9 l. |
Motor
Effective power | 133 kW and 47.7 kW | 64 % more or 85.3 kW |
Maximum torque | 840.6 Nm and 221 Nm | 74 % more or 619.6 Nm |
Displacement | 6.6 l. and 2.4 l. | 64 % more or 4.2 l. |
Hydraulic system
Pump bandwidth | 295 l/min and 64.4 l/min | 78 % more or 230.6 l/min |
Lowering time | 2.7 sec and 4 sec | 32 % less or 1.3 sec |
Gear box
Forward gears number | 4 and 2 | 50 % more or 2 |
Reverse gears number | 3 and 2 | 33 % more or 1 |
Maximum forward speed | 43.2 km/h and 30 km/h | 31 % more or 13.2 km/h |
Neutral reasons:
Sizes
Length with forks on ground level | 5805 mm and 8345 mm |
Hinge axis maximum height | 3211 mm and 3933 mm |
Length with bucket on ground level | 5295 mm and 7543 mm |
Between tyres width | 1848 mm and 2674 mm |
Height to cab upper part | 2725 mm and 3356 mm |
Wheelbase | 2150 mm and 3020 mm |
Operation
Operating voltage | 12 V and 24 V |
Generator current strength | 65 amperes and 65 amperes |
Rear axle oscillating | 20 degrees and 12 degrees |
Tyre size | 365/70R18 and 20.5-R25 |
Working weight | 5240 kg and 16004 kg |
Motor
Manufacturer | John Deere and Caterpillar |
Model | 4024T and 6.6 Acert |
Hydraulic system
Type of pump | fixed-displacement gear and piston pump |
Overflow valve pressure | 21994.3 kPa and 6894.8 kPa |
Images
Sizes
1. Length with bucket on ground level | 5295 mm | 1. Length with bucket on ground level | 7543 mm |
2. Between tyres width | 1848 mm | 2. Between tyres width | 2674 mm |
3. Height to cab upper part | 2725 mm | 3. Height to cab upper part | 3356 mm |
4. Wheelbase | 2150 mm | 4. Wheelbase | 3020 mm |
5. Clearance | 295 mm | 5. Clearance | 397 mm |
6. Hinge axis maximum height | 3211 mm | 6. Hinge axis maximum height | 3933 mm |
7. Unloading ground clearance at maximum lifting | 2550 mm | 7. Unloading ground clearance at maximum lifting | 2805 mm |
9. Fork tines length | 1200 mm | 9. Fork tines length | 1524 mm |
10. Length with forks on ground level | 5805 mm | 10. Length with forks on ground level | 8345 mm |
11. Maximum lifting height | 3039 mm | 11. Maximum lifting height | 3545 mm |