- Home/
- Comparison/
- Attached Equipment/
- John Deere 244J vs. John Deere TC44H
John Deere 244J vs. John Deere TC44H
10 reasons to buy John Deere 244J:
Shovel
Breakout power | 48 kN and 7988 kN | 99 % less or 7940 kN |
Operation
Turn radius | 3505 mm and 4703 mm | 25 % less or 1198 mm |
Generator current strength | 65 amperes and 55 amperes | 15 % more or 10 amperes |
Static bucket tipping load | 3836 kg and 5983 kg | 36 % less or 2147 kg |
Static tipping forks load | 2905 kg and 4687 kg | 38 % less or 1782 kg |
Motor
Power measured at | 2600 rev / min and 2200 rev / min | 15 % more or 400 rev |
Torque measured at | 1600 rev / min and 1400 rev / min | 12 % more or 200 rev |
Hydraulic system
Lifting time | 4.9 sec and 5 sec | 2 % less or 0.1 sec |
Unloading time | 1.4 sec and 1.5 sec | 7 % less or 0.1 sec |
Gear box
Maximum reverse gear | 30 km/h and 26.3 km/h | 12 % more or 3.7 km/h |
19 reasons to buy John Deere TC44H:
Sizes
Unloading ground clearance at maximum lifting | 2676 mm and 2550 mm | 5 % more or 126 mm |
Radius at maximum height and unloading | 1258 mm and 1170 mm | 7 % more or 88 mm |
Fork tines length | 1220 mm and 1200 mm | 2 % more or 20 mm |
Maximum lifting height | 3490 mm and 3039 mm | 13 % more or 451 mm |
Clearance | 355 mm and 295 mm | 17 % more or 60 mm |
Operation
Fuel Capacity | 180 l. and 80 l. | 56 % more or 100 l. |
Cooling system fluid volume | 19 l. and 10 l. | 47 % more or 9 l. |
Engine oil volume | 12.5 l. and 8.5 l. | 32 % more or 4.0 l. |
Front differential fluid volume | 15 l. and 4 l. | 73 % more or 11 l. |
Rear differential fluid volume | 15 l. and 4.1 l. | 73 % more or 10.9 l. |
Hydraulic system fluid volume | 106 l. and 60 l. | 43 % more or 46 l. |
Motor
Effective power | 82 kW and 47.7 kW | 42 % more or 34.3 kW |
Maximum torque | 441 Nm and 221 Nm | 50 % more or 220 Nm |
Displacement | 4.5 l. and 2.4 l. | 47 % more or 2.1 l. |
Hydraulic system
Pump bandwidth | 136.3 l/min and 64.4 l/min | 53 % more or 71.9 l/min |
Lowering time | 2.3 sec and 4 sec | 42 % less or 1.7 sec |
Gear box
Reverse gears number | 3 and 2 | 33 % more or 1 |
Maximum forward speed | 40 km/h and 30 km/h | 25 % more or 10 km/h |
Forward gears number | 4 and 2 | 50 % more or 2 |
Neutral reasons:
Sizes
Hinge axis maximum height | 3211 mm and 3682 mm |
Length with forks on ground level | 5805 mm and 7368 mm |
Length with bucket on ground level | 5295 mm and 6969 mm |
Between tyres width | 1848 mm and 2330 mm |
Height to cab upper part | 2725 mm and 3125 mm |
Wheelbase | 2150 mm and 2750 mm |
Operation
Working weight | 5240 kg and 10212 kg |
Operating voltage | 12 V and 24 V |
Rear axle oscillating | 20 degrees and 24 degrees |
Tyre size | 365/70R18 and 17.5-25 |
Motor
Cylinders number | 4 and 4 |
Aspiration | turbocharging and turbocharging |
Manufacturer | John Deere and John Deere |
Model | 4024T and 4045T |
Hydraulic system
Type of pump | fixed-displacement gear and piston pump |
Overflow valve pressure | 21994.3 kPa and 24850 kPa |
Gear box
Transmission type | hydrostatic and powershift |
Images
Sizes
10. Length with forks on ground level | 5805 mm | 10. Length with forks on ground level | 7368 mm |
11. Maximum lifting height | 3039 mm | 11. Maximum lifting height | 3490 mm |
1. Length with bucket on ground level | 5295 mm | 1. Length with bucket on ground level | 6969 mm |
2. Between tyres width | 1848 mm | 2. Between tyres width | 2330 mm |
3. Height to cab upper part | 2725 mm | 3. Height to cab upper part | 3125 mm |
4. Wheelbase | 2150 mm | 4. Wheelbase | 2750 mm |
5. Clearance | 295 mm | 5. Clearance | 355 mm |
6. Hinge axis maximum height | 3211 mm | 6. Hinge axis maximum height | 3682 mm |
7. Unloading ground clearance at maximum lifting | 2550 mm | 7. Unloading ground clearance at maximum lifting | 2676 mm |
9. Fork tines length | 1200 mm | 9. Fork tines length | 1220 mm |