vs.

      John Deere 444H vs. JCB 411ZX

      21 reasons to buy John Deere 444H:

      Sizes

      Unloading ground clearance at maximum lifting 2638 mm and 2512 mm 5 % more or 126 mm
      Radius at maximum height and unloading 1095 mm and 634 mm 42 % more or 461 mm
      Fork tines length 1220 mm and 1200 mm 2 % more or 20 mm
      Maximum lifting height 3406 mm and 3021 mm 11 % more or 385 mm

      Operation

      Cooling system fluid volume 19 l. and 15.5 l. 18 % more or 3.5 l.
      Engine oil volume 12.5 l. and 9.4 l. 25 % more or 3.1 l.
      Front differential fluid volume 15 l. and 9.5 l. 37 % more or 5.5 l.
      Rear differential fluid volume 15 l. and 10.5 l. 30 % more or 4.5 l.
      Hydraulic system fluid volume 106 l. and 85.2 l. 20 % more or 20.8 l.
      Fuel Capacity 180 l. and 100 l. 44 % more or 80 l.

      Motor

      Effective power 82 kW and 50 kW 39 % more or 32 kW
      Power measured at 2200 rev / min and 2000 rev / min 9 % more or 200 rev
      Maximum torque 441 Nm and 302.3 Nm 31 % more or 138.7 Nm
      Displacement 4.5 l. and 4.4 l. 2 % more or 0.1 l.
      Full power 86 kW and 55.9 kW 35 % more or 30.1 kW

      Hydraulic system

      Lowering time 2.6 sec and 3.2 sec 19 % less or 0.6 sec
      Pump bandwidth 136.3 l/min and 66 l/min 52 % more or 70.3 l/min

      Gear box

      Maximum reverse gear 26.3 km/h and 20 km/h 24 % more or 6.3 km/h
      Forward gears number 4 and 2 50 % more or 2
      Reverse gears number 3 and 2 33 % more or 1
      Maximum forward speed 40 km/h and 20 km/h 50 % more or 20 km/h

      6 reasons to buy JCB 411ZX:

      Sizes

      Clearance 410 mm and 355 mm 13 % more or 55 mm

      Operation

      Generator current strength 75 amperes and 55 amperes 27 % more or 20 amperes
      Transmission fluid volume 85 l. and 12.5 l. 85 % more or 72.5 l.
      Static bucket tipping load 3089 kg and 7267 kg 57 % less or 4178 kg
      Static tipping forks load 4170 kg and 4364 kg 4 % less or 194 kg
      Turn radius 3605.8 mm and 4703 mm 23 % less or 1097.2 mm

      Neutral reasons:

      Sizes

      Wheelbase 2750 mm and 2000 mm
      Hinge axis maximum height 3605 mm and 3165 mm
      Length with bucket on ground level 6730 mm and 5070 mm
      Between tyres width 2330 mm and 1900 mm
      Height to cab upper part 3125 mm and 2660 mm

      Operation

      Operating voltage 24 V and 12 V
      Rear axle oscillating 24 degrees and 9 degrees
      Working weight 9733 kg and 5250 kg

      Motor

      Torque measured at 1400 rev / min and 1400 rev / min
      Manufacturer John Deere and JCB
      Model 4045T and 1104C-44
      Aspiration turbocharging and natural aspiration

      Hydraulic system

      Type of pump piston pump and gear type pump
      Overflow valve pressure 24850 kPa and 22001.2 kPa
      Lifting time 5 sec and 5 sec

      Gear box

      Transmission type powershift and Hydro-Static Transmission

      Images

      Sizes

      1. Length with bucket on ground level 6730 mm 1. Length with bucket on ground level 5070 mm
      2. Between tyres width 2330 mm 2. Between tyres width 1900 mm
      3. Height to cab upper part 3125 mm 3. Height to cab upper part 2660 mm
      4. Wheelbase 2750 mm 4. Wheelbase 2000 mm
      5. Clearance 355 mm 5. Clearance 410 mm
      6. Hinge axis maximum height 3605 mm 6. Hinge axis maximum height 3165 mm
      7. Unloading ground clearance at maximum lifting 2638 mm 7. Unloading ground clearance at maximum lifting 2512 mm
      9. Fork tines length 1220 mm 9. Fork tines length 1200 mm
      11. Maximum lifting height 3406 mm 11. Maximum lifting height 3021 mm