- Home/
- Comparison/
- Attached Equipment/
- John Deere 624H vs. JCB 406
John Deere 624H vs. JCB 406
22 reasons to buy John Deere 624H:
Sizes
Clearance | 406 mm and 330 mm | 19 % more or 76 mm |
Unloading ground clearance at maximum lifting | 2858 mm and 2489 mm | 13 % more or 369 mm |
Radius at maximum height and unloading | 1038 mm and 764 mm | 26 % more or 274 mm |
Fork tines length | 1220 mm and 1200 mm | 2 % more or 20 mm |
Maximum lifting height | 3732 mm and 3012 mm | 19 % more or 720 mm |
Operation
Hydraulic system fluid volume | 117 l. and 70 l. | 40 % more or 47 l. |
Fuel Capacity | 265 l. and 79.5 l. | 70 % more or 185.5 l. |
Engine oil volume | 20 l. and 11.7 l. | 41 % more or 8.3 l. |
Front differential fluid volume | 28 l. and 3.8 l. | 86 % more or 24.2 l. |
Rear differential fluid volume | 20 l. and 3.8 l. | 81 % more or 16.2 l. |
Motor
Effective power | 128 kW and 41.8 kW | 67 % more or 86.2 kW |
Maximum torque | 780 Nm and 189.8 Nm | 76 % more or 590.2 Nm |
Full power | 119 kW and 44 kW | 63 % more or 75 kW |
Cylinders number | 6 and 4 | 33 % more or 2 |
Displacement | 6.8 l. and 3.1 l. | 54 % more or 3.7 l. |
Hydraulic system
Unloading time | 1.4 sec and 3.5 sec | 60 % less or 2.1 sec |
Lowering time | 3 sec and 3.1 sec | 3 % less or 0.1 sec |
Pump bandwidth | 208.2 l/min and 60 l/min | 71 % more or 148.2 l/min |
Gear box
Forward gears number | 4 and 2 | 50 % more or 2 |
Reverse gears number | 3 and 2 | 33 % more or 1 |
Maximum forward speed | 39.5 km/h and 20.1 km/h | 49 % more or 19.4 km/h |
Maximum reverse gear | 23.9 km/h and 20.1 km/h | 16 % more or 3.8 km/h |
7 reasons to buy JCB 406:
Shovel
Breakout power | 41.9 kN and 123.3 kN | 66 % less or 81.4 kN |
Operation
Turn radius | 2720 mm and 5187 mm | 48 % less or 2467 mm |
Generator current strength | 80 amperes and 55 amperes | 31 % more or 25 amperes |
Static bucket tipping load | 4290.1 kg and 10726.1 kg | 60 % less or 6436.0 kg |
Motor
Power measured at | 2500 rev / min and 2200 rev / min | 12 % more or 300 rev |
Torque measured at | 1700 rev / min and 1400 rev / min | 18 % more or 300 rev |
Hydraulic system
Lifting time | 4.9 sec and 5.8 sec | 16 % less or 0.9 sec |
Neutral reasons:
Sizes
Hinge axis maximum height | 3961 mm and 3131 mm |
Length with bucket on ground level | 7610 mm and 5133 mm |
Between tyres width | 2530 mm and 1761 mm |
Height to cab upper part | 3300 mm and 2500 mm |
Wheelbase | 3030 mm and 2100 mm |
Operation
Operating voltage | 24 V and 12 V |
Rear axle oscillating | 26 degrees and 10 degrees |
Tyre size | 17.5-25 and 12.5/80 R18 SGL |
Working weight | 13559.7 kg and 4933.7 kg |
Motor
Manufacturer | John Deere and Deutz |
Model | 6068H and F4L2011 |
Aspiration | Turbocharging with subsequent air cooling (by a cooling radiator) and natural aspiration |
Hydraulic system
Type of pump | piston pump and gear type pump |
Overflow valve pressure | 24850 kPa and 22994 kPa |
Gear box
Transmission type | powershift and Hydro-Static Transmission |
Images
Sizes
1. Length with bucket on ground level | 7610 mm | 1. Length with bucket on ground level | 5133 mm |
2. Between tyres width | 2530 mm | 2. Between tyres width | 1761 mm |
3. Height to cab upper part | 3300 mm | 3. Height to cab upper part | 2500 mm |
4. Wheelbase | 3030 mm | 4. Wheelbase | 2100 mm |
5. Clearance | 406 mm | 5. Clearance | 330 mm |
6. Hinge axis maximum height | 3961 mm | 6. Hinge axis maximum height | 3131 mm |
7. Unloading ground clearance at maximum lifting | 2858 mm | 7. Unloading ground clearance at maximum lifting | 2489 mm |
9. Fork tines length | 1220 mm | 9. Fork tines length | 1200 mm |
11. Maximum lifting height | 3732 mm | 11. Maximum lifting height | 3012 mm |