vs.

      John Deere TC54H vs. John Deere 244J

      20 reasons to buy John Deere TC54H:

      Sizes

      Fork tines length 1220 mm and 1200 mm 2 % more or 20 mm
      Maximum lifting height 3747 mm and 3039 mm 19 % more or 708 mm
      Clearance 424 mm and 295 mm 30 % more or 129 mm
      Unloading ground clearance at maximum lifting 2846 mm and 2550 mm 10 % more or 296 mm
      Radius at maximum height and unloading 1298 mm and 1170 mm 10 % more or 128 mm

      Operation

      Front differential fluid volume 19 l. and 4 l. 79 % more or 15 l.
      Rear differential fluid volume 19 l. and 4.1 l. 78 % more or 14.9 l.
      Hydraulic system fluid volume 106 l. and 60 l. 43 % more or 46 l.
      Fuel Capacity 246.1 l. and 80 l. 67 % more or 166.1 l.
      Cooling system fluid volume 23 l. and 10 l. 57 % more or 13 l.
      Engine oil volume 18 l. and 8.5 l. 53 % more or 9.5 l.

      Motor

      Displacement 6.8 l. and 2.4 l. 65 % more or 4.4 l.
      Effective power 97 kW and 47.7 kW 51 % more or 49.3 kW
      Maximum torque 600 Nm and 221 Nm 63 % more or 379 Nm
      Cylinders number 6 and 4 33 % more or 2

      Hydraulic system

      Pump bandwidth 155.2 l/min and 64.4 l/min 59 % more or 90.8 l/min
      Lowering time 2.8 sec and 4 sec 30 % less or 1.2 sec

      Gear box

      Forward gears number 4 and 2 50 % more or 2
      Reverse gears number 3 and 2 33 % more or 1
      Maximum forward speed 40 km/h and 30 km/h 25 % more or 10 km/h

      10 reasons to buy John Deere 244J:

      Shovel

      Breakout power 48 kN and 10345 kN 100 % less or 10297 kN

      Operation

      Turn radius 3505 mm and 4959 mm 29 % less or 1454 mm
      Generator current strength 65 amperes and 55 amperes 15 % more or 10 amperes
      Static bucket tipping load 3836 kg and 8004 kg 52 % less or 4168 kg
      Static tipping forks load 2905 kg and 6080 kg 52 % less or 3175 kg

      Motor

      Power measured at 2600 rev / min and 2200 rev / min 15 % more or 400 rev
      Torque measured at 1600 rev / min and 1300 rev / min 19 % more or 300 rev

      Hydraulic system

      Lifting time 4.9 sec and 5.8 sec 16 % less or 0.9 sec
      Unloading time 1.4 sec and 1.5 sec 7 % less or 0.1 sec

      Gear box

      Maximum reverse gear 30 km/h and 25 km/h 17 % more or 5 km/h

      Neutral reasons:

      Sizes

      Wheelbase 2900 mm and 2150 mm
      Length with forks on ground level 7585 mm and 5805 mm
      Between tyres width 2430 mm and 1848 mm
      Height to cab upper part 3230 mm and 2725 mm
      Length with bucket on ground level 7365 mm and 5295 mm

      Operation

      Working weight 12043.8 kg and 5240 kg
      Operating voltage 24 V and 12 V
      Rear axle oscillating 28 degrees and 20 degrees
      Tyre size 17.5-25 and 365/70R18

      Motor

      Manufacturer John Deere and John Deere
      Aspiration turbocharging and turbocharging
      Model 6068T and 4024T

      Hydraulic system

      Type of pump piston pump and fixed-displacement gear
      Overflow valve pressure 24850 kPa and 21994.3 kPa

      Gear box

      Transmission type powershift and hydrostatic

      Images

      Sizes

      5. Clearance 424 mm 5. Clearance 295 mm
      7. Unloading ground clearance at maximum lifting 2846 mm 7. Unloading ground clearance at maximum lifting 2550 mm
      9. Fork tines length 1220 mm 9. Fork tines length 1200 mm
      10. Length with forks on ground level 7585 mm 10. Length with forks on ground level 5805 mm
      11. Maximum lifting height 3747 mm 11. Maximum lifting height 3039 mm
      1. Length with bucket on ground level 7365 mm 1. Length with bucket on ground level 5295 mm
      2. Between tyres width 2430 mm 2. Between tyres width 1848 mm
      3. Height to cab upper part 3230 mm 3. Height to cab upper part 2725 mm
      4. Wheelbase 2900 mm 4. Wheelbase 2150 mm