- Home/
- Comparison/
- Attached Equipment/
- John Deere TC54H vs. Michigan L160
John Deere TC54H vs. Michigan L160
8 reasons to buy John Deere TC54H:
Sizes
Maximum lifting height | 3747 mm and 835 mm | 78 % more or 2912 mm |
Radius at maximum height and unloading | 1298 mm and 1150 mm | 11 % more or 148 mm |
Operation
Turn radius | 4959 mm and 7380 mm | 33 % less or 2421 mm |
Static bucket tipping load | 8004 kg and 16959.8 kg | 53 % less or 8955.8 kg |
Static tipping forks load | 6080 kg and 10200 kg | 40 % less or 4120 kg |
Hydraulic system
Lifting time | 5.8 sec and 7 sec | 17 % less or 1.2 sec |
Unloading time | 1.5 sec and 1.9 sec | 21 % less or 0.4 sec |
Gear box
Maximum forward speed | 40 km/h and 39.9 km/h | 0 % more or 0.1 km/h |
21 reasons to buy Michigan L160:
Sizes
Fork tines length | 1500 mm and 1220 mm | 19 % more or 280 mm |
Clearance | 487 mm and 424 mm | 13 % more or 63 mm |
Unloading ground clearance at maximum lifting | 3180 mm and 2846 mm | 11 % more or 334 mm |
Shovel
Breakout power | 178.8 kN and 10345 kN | 98 % less or 10166.2 kN |
Brimmed bucket capacity | 3.5 m3 and 2 m3 | 43 % more or 1.5 m3 |
Operation
Hydraulic system fluid volume | 320 l. and 106 l. | 67 % more or 214 l. |
Generator current strength | 60 amperes and 55 amperes | 8 % more or 5 amperes |
Fuel Capacity | 340 l. and 246.1 l. | 28 % more or 93.9 l. |
Cooling system fluid volume | 70 l. and 23 l. | 67 % more or 47 l. |
Engine oil volume | 27 l. and 18 l. | 33 % more or 9 l. |
Transmission fluid volume | 47 l. and 20 l. | 57 % more or 27 l. |
Front differential fluid volume | 45 l. and 19 l. | 58 % more or 26 l. |
Rear differential fluid volume | 56 l. and 19 l. | 66 % more or 37 l. |
Motor
Maximum torque | 962 Nm and 600 Nm | 38 % more or 362 Nm |
Full power | 196.9 kW and 103 kW | 48 % more or 93.9 kW |
Torque measured at | 1400 rev / min and 1300 rev / min | 7 % more or 100 rev |
Effective power | 187.9 kW and 97 kW | 48 % more or 90.9 kW |
Displacement | 9.6 l. and 6.8 l. | 29 % more or 2.8 l. |
Hydraulic system
Pump bandwidth | 250 l/min and 155.2 l/min | 38 % more or 94.8 l/min |
Gear box
Reverse gears number | 4 and 3 | 25 % more or 1 |
Maximum reverse gear | 39.9 km/h and 25 km/h | 37 % more or 14.9 km/h |
Neutral reasons:
Sizes
Length with forks on ground level | 7585 mm and 8170 mm |
Between tyres width | 2430 mm and 3004 mm |
Length with bucket on ground level | 7365 mm and 8140 mm |
Height to cab upper part | 3230 mm and 3687 mm |
Wheelbase | 2900 mm and 3550 mm |
Operation
Rear axle oscillating | 28 degrees and 30 degrees |
Operating voltage | 24 V and 24 V |
Tyre size | 17.5-25 and 26.5-25 |
Working weight | 12043.8 kg and 22314.5 kg |
Motor
Model | 6068T and TD102GB |
Cylinders number | 6 and 6 |
Power measured at | 2200 rev / min and 2200 rev / min |
Aspiration | turbocharging and turbocharging |
Manufacturer | John Deere and Volvo |
Hydraulic system
Lowering time | 2.8 sec and 2.8 sec |
Type of pump | piston pump and triple paddle type |
Overflow valve pressure | 24850 kPa and 19994.8 kPa |
Gear box
Transmission type | powershift and Volvo BM HT 200 automatic transmission system with power gear shifting |
Forward gears number | 4 and 4 |
Images
Sizes
1. Length with bucket on ground level | 7365 mm | 1. Length with bucket on ground level | 8140 mm |
2. Between tyres width | 2430 mm | 2. Between tyres width | 3004 mm |
3. Height to cab upper part | 3230 mm | 3. Height to cab upper part | 3687 mm |
4. Wheelbase | 2900 mm | 4. Wheelbase | 3550 mm |
5. Clearance | 424 mm | 5. Clearance | 487 mm |
7. Unloading ground clearance at maximum lifting | 2846 mm | 7. Unloading ground clearance at maximum lifting | 3180 mm |
9. Fork tines length | 1220 mm | 9. Fork tines length | 1500 mm |
10. Length with forks on ground level | 7585 mm | 10. Length with forks on ground level | 8170 mm |
11. Maximum lifting height | 3747 mm | 11. Maximum lifting height | 835 mm |