vs.

      John Deere TC62H vs. JCB 411ZX Zet

      22 reasons to buy John Deere TC62H:

      Sizes

      Unloading ground clearance at maximum lifting 2907 mm and 2775 mm 5 % more or 132 mm
      Radius at maximum height and unloading 1278 mm and 705 mm 45 % more or 573 mm
      Fork tines length 1220 mm and 1200 mm 2 % more or 20 mm
      Maximum lifting height 3821 mm and 3328 mm 13 % more or 493 mm

      Shovel

      Bucket capacity with top 2.7 m3 and 1.2 m3 56 % more or 1.5 m3
      Brimmed bucket capacity 2.3 m3 and 1 m3 57 % more or 1.3 m3

      Operation

      Fuel Capacity 265 l. and 110 l. 58 % more or 155 l.
      Cooling system fluid volume 22 l. and 18 l. 18 % more or 4 l.
      Engine oil volume 20 l. and 10.7 l. 46 % more or 9.3 l.
      Front differential fluid volume 27 l. and 16 l. 41 % more or 11 l.
      Rear differential fluid volume 21 l. and 18 l. 14 % more or 3 l.

      Motor

      Power measured at 2200 rev / min and 2000 rev / min 9 % more or 200 rev
      Maximum torque 785 Nm and 302.3 Nm 61 % more or 482.7 Nm
      Full power 128.3 kW and 55.9 kW 56 % more or 72.4 kW
      Effective power 119 kW and 50 kW 58 % more or 69 kW
      Displacement 6.8 l. and 4.4 l. 35 % more or 2.4 l.

      Hydraulic system

      Lowering time 3 sec and 3.1 sec 3 % less or 0.1 sec
      Pump bandwidth 208.2 l/min and 90 l/min 57 % more or 118.2 l/min

      Gear box

      Forward gears number 4 and 2 50 % more or 2
      Reverse gears number 3 and 2 33 % more or 1
      Maximum forward speed 39.5 km/h and 20 km/h 49 % more or 19.5 km/h
      Maximum reverse gear 23.9 km/h and 20 km/h 16 % more or 3.9 km/h

      9 reasons to buy JCB 411ZX Zet:

      Sizes

      Clearance 430 mm and 406 mm 6 % more or 24 mm

      Operation

      Turn radius 4550 mm and 5187 mm 12 % less or 637 mm
      Generator current strength 65 amperes and 55 amperes 15 % more or 10 amperes
      Static bucket tipping load 5200 kg and 9755 kg 47 % less or 4555 kg
      Static tipping forks load 3550 kg and 7546 kg 53 % less or 3996 kg
      Transmission fluid volume 130 l. and 27 l. 79 % more or 103 l.
      Hydraulic system fluid volume 130 l. and 117 l. 10 % more or 13 l.

      Motor

      Torque measured at 1400 rev / min and 1300 rev / min 7 % more or 100 rev

      Hydraulic system

      Lifting time 4.9 sec and 5.8 sec 16 % less or 0.9 sec

      Neutral reasons:

      Sizes

      Height to cab upper part 3300 mm and 2870 mm
      Wheelbase 3003 mm and 2250 mm
      Hinge axis maximum height 4005 mm and 3516 mm
      Between tyres width 2615 mm and 2250 mm
      Length with bucket on ground level 7671 mm and 5530 mm

      Operation

      Operating voltage 24 V and 12 V
      Rear axle oscillating 26 degrees and 9 degrees
      Tyre size 20.5-25 and 405/80 R25
      Working weight 13849 kg and 7620 kg

      Motor

      Model 6068H and 1104C-44
      Aspiration Turbocharging with subsequent air cooling (by a cooling radiator) and natural aspiration
      Manufacturer John Deere and JCB

      Hydraulic system

      Type of pump piston pump and gear type pump
      Overflow valve pressure 24850 kPa and 24497.1 kPa

      Gear box

      Transmission type powershift and Hydro-Static Transmission

      Images

      Sizes

      11. Maximum lifting height 3821 mm 11. Maximum lifting height 3328 mm
      1. Length with bucket on ground level 7671 mm 1. Length with bucket on ground level 5530 mm
      2. Between tyres width 2615 mm 2. Between tyres width 2250 mm
      3. Height to cab upper part 3300 mm 3. Height to cab upper part 2870 mm
      4. Wheelbase 3003 mm 4. Wheelbase 2250 mm
      5. Clearance 406 mm 5. Clearance 430 mm
      6. Hinge axis maximum height 4005 mm 6. Hinge axis maximum height 3516 mm
      7. Unloading ground clearance at maximum lifting 2907 mm 7. Unloading ground clearance at maximum lifting 2775 mm
      9. Fork tines length 1220 mm 9. Fork tines length 1200 mm