- Home/
- Comparison/
- Attached Equipment/
- John Deere TC62H vs. JCB 436HT Ultrahigh Lift
John Deere TC62H vs. JCB 436HT Ultrahigh Lift
11 reasons to buy John Deere TC62H:
Sizes
Radius at maximum height and unloading | 1278 mm and 1068 mm | 16 % more or 210 mm |
Shovel
Breakout power | 120.5 kN and 153 kN | 21 % less or 32.5 kN |
Bucket capacity with top | 2.7 m3 and 2.4 m3 | 11 % more or 0.3 m3 |
Brimmed bucket capacity | 2.3 m3 and 2.1 m3 | 9 % more or 0.2 m3 |
Operation
Engine oil volume | 20 l. and 14 l. | 30 % more or 6 l. |
Turn radius | 5187 mm and 6620 mm | 22 % less or 1433 mm |
Fuel Capacity | 265 l. and 230.9 l. | 13 % more or 34.1 l. |
Motor
Displacement | 6.8 l. and 5.9 l. | 13 % more or 0.9 l. |
Hydraulic system
Lowering time | 3 sec and 3.4 sec | 12 % less or 0.4 sec |
Lifting time | 5.8 sec and 5.9 sec | 2 % less or 0.1 sec |
Gear box
Maximum forward speed | 39.5 km/h and 37.8 km/h | 4 % more or 1.7 km/h |
17 reasons to buy JCB 436HT Ultrahigh Lift:
Sizes
Clearance | 459 mm and 406 mm | 12 % more or 53 mm |
Unloading ground clearance at maximum lifting | 4191 mm and 2907 mm | 31 % more or 1284 mm |
Maximum lifting height | 5045 mm and 3821 mm | 24 % more or 1224 mm |
Operation
Transmission fluid volume | 32.2 l. and 27 l. | 16 % more or 5.2 l. |
Static bucket tipping load | 7668 kg and 9755 kg | 21 % less or 2087 kg |
Front differential fluid volume | 39 l. and 27 l. | 31 % more or 12 l. |
Static tipping forks load | 5428.1 kg and 7546 kg | 28 % less or 2117.9 kg |
Rear differential fluid volume | 39 l. and 21 l. | 46 % more or 18 l. |
Hydraulic system fluid volume | 208.2 l. and 117 l. | 44 % more or 91.2 l. |
Cooling system fluid volume | 34.1 l. and 22 l. | 35 % more or 12.1 l. |
Generator current strength | 70 amperes and 55 amperes | 21 % more or 15 amperes |
Motor
Maximum torque | 786.4 Nm and 785 Nm | 0 % more or 1.4 Nm |
Full power | 132 kW and 128.3 kW | 3 % more or 3.7 kW |
Effective power | 123 kW and 119 kW | 3 % more or 4 kW |
Hydraulic system
Pump bandwidth | 264 l/min and 208.2 l/min | 21 % more or 55.8 l/min |
Unloading time | 1 sec and 1.7 sec | 41 % less or 0.7 sec |
Gear box
Maximum reverse gear | 27 km/h and 23.9 km/h | 11 % more or 3.1 km/h |
Neutral reasons:
Sizes
Between tyres width | 2615 mm and 2597 mm |
Height to cab upper part | 3300 mm and 3335 mm |
Hinge axis maximum height | 4005 mm and 4650 mm |
Wheelbase | 3003 mm and 3000 mm |
Length with bucket on ground level | 7671 mm and 7282 mm |
Fork tines length | 1220 mm and 1220 mm |
Operation
Rear axle oscillating | 26 degrees and 21 degrees |
Tyre size | 20.5-25 and Michelin 20.5R25 XHA (L3) |
Working weight | 13849 kg and 15925.2 kg |
Operating voltage | 24 V and 24 V |
Motor
Torque measured at | 1300 rev / min and 1300 rev / min |
Cylinders number | 6 and 6 |
Manufacturer | John Deere and Cummins |
Model | 6068H and BTAA 5.9C |
Aspiration | Turbocharging with subsequent air cooling (by a cooling radiator) and turbocharging |
Power measured at | 2200 rev / min and 2200 rev / min |
Hydraulic system
Type of pump | piston pump and twin variable displacement piston pumps |
Overflow valve pressure | 24850 kPa and 24993.5 kPa |
Gear box
Transmission type | powershift and smooth power shifting |
Forward gears number | 4 and 4 |
Reverse gears number | 3 and 3 |
Images
Sizes
1. Length with bucket on ground level | 7671 mm | 1. Length with bucket on ground level | 7282 mm |
2. Between tyres width | 2615 mm | 2. Between tyres width | 2597 mm |
3. Height to cab upper part | 3300 mm | 3. Height to cab upper part | 3335 mm |
4. Wheelbase | 3003 mm | 4. Wheelbase | 3000 mm |
5. Clearance | 406 mm | 5. Clearance | 459 mm |
6. Hinge axis maximum height | 4005 mm | 6. Hinge axis maximum height | 4650 mm |
7. Unloading ground clearance at maximum lifting | 2907 mm | 7. Unloading ground clearance at maximum lifting | 4191 mm |
9. Fork tines length | 1220 mm | 9. Fork tines length | 1220 mm |
11. Maximum lifting height | 3821 mm | 11. Maximum lifting height | 5045 mm |