- Home/
- Comparison/
- Attached Equipment/
- Kawasaki 65TM-2 vs. Zettelmeyer LF802
Kawasaki 65TM-2 vs. Zettelmeyer LF802
15 reasons to buy Kawasaki 65TM-2:
Sizes
Fork tines length | 1219.2 mm and 1000 mm | 18 % more or 219.2 mm |
Clearance | 445 mm and 310 mm | 30 % more or 135 mm |
Operation
Fuel Capacity | 175 l. and 100 l. | 43 % more or 75 l. |
Engine oil volume | 14.2 l. and 9 l. | 37 % more or 5.2 l. |
Front differential fluid volume | 20 l. and 8.7 l. | 56 % more or 11.3 l. |
Rear differential fluid volume | 20 l. and 11.5 l. | 42 % more or 8.5 l. |
Motor
Maximum torque | 519.3 Nm and 300 Nm | 42 % more or 219.3 Nm |
Cylinders number | 6 and 4 | 33 % more or 2 |
Displacement | 5.9 l. and 3.2 l. | 46 % more or 2.7 l. |
Effective power | 99.9 kW and 56 kW | 44 % more or 43.9 kW |
Power measured at | 2400 rev / min and 2100 rev / min | 12 % more or 300 rev |
Gear box
Forward gears number | 4 and 2 | 50 % more or 2 |
Reverse gears number | 4 and 2 | 50 % more or 2 |
Maximum forward speed | 37.2 km/h and 20 km/h | 46 % more or 17.2 km/h |
Maximum reverse gear | 37.2 km/h and 12.4 km/h | 67 % more or 24.8 km/h |
6 reasons to buy Zettelmeyer LF802:
Sizes
Maximum lifting height | 5560 mm and 3705 mm | 33 % more or 1855 mm |
Operation
Hydraulic system fluid volume | 110 l. and 100 l. | 9 % more or 10 l. |
Generator current strength | 55 amperes and 50 amperes | 9 % more or 5 amperes |
Static tipping forks load | 4000 kg and 5840 kg | 32 % less or 1840 kg |
Motor
Torque measured at | 1500 rev / min and 1400 rev / min | 7 % more or 100 rev |
Hydraulic system
Pump bandwidth | 82 l/min and 60.9 l/min | 26 % more or 21.1 l/min |
Neutral reasons:
Sizes
Length with forks on ground level | 7630 mm and 5300 mm |
Height to cab upper part | 3270 mm and 2825 mm |
Wheelbase | 2900 mm and 2250 mm |
Operation
Operating voltage | 24 V and 24 V |
Rear axle oscillating | 12 degrees and 10 degrees |
Tyre size | 20.5x25-12PR (L-2) and 16/70-24 |
Motor
Aspiration | turbocharging and turbocharging |
Model | B5.9-C and KHD BF 4M 1012 E |
Hydraulic system
Type of pump | gear type pump and gear type pump |
Overflow valve pressure | 19098.5 kPa and 20849.7 kPa |
Gear box
Transmission type | powershift transmission and powershift transmission |
Images
Sizes
9. Fork tines length | 1219.2 mm | 9. Fork tines length | 1000 mm |
10. Length with forks on ground level | 7630 mm | 10. Length with forks on ground level | 5300 mm |
11. Maximum lifting height | 3705 mm | 11. Maximum lifting height | 5560 mm |
3. Height to cab upper part | 3270 mm | 3. Height to cab upper part | 2825 mm |
4. Wheelbase | 2900 mm | 4. Wheelbase | 2250 mm |
5. Clearance | 445 mm | 5. Clearance | 310 mm |