- Home/
- Comparison/
- Attached Equipment/
- Michigan L160 vs. John Deere 644G
Michigan L160 vs. John Deere 644G
22 reasons to buy Michigan L160:
Sizes
Unloading ground clearance at maximum lifting | 3180 mm and 2871 mm | 10 % more or 309 mm |
Radius at maximum height and unloading | 1150 mm and 1138 mm | 1 % more or 12 mm |
Fork tines length | 1500 mm and 1372 mm | 9 % more or 128 mm |
Clearance | 487 mm and 483 mm | 1 % more or 4 mm |
Shovel
Bucket capacity with top | 3.8 m3 and 2.9 m3 | 24 % more or 0.9 m3 |
Brimmed bucket capacity | 3.5 m3 and 2.4 m3 | 31 % more or 1.1 m3 |
Operation
Fuel Capacity | 340 l. and 284 l. | 16 % more or 56 l. |
Cooling system fluid volume | 70 l. and 28.5 l. | 59 % more or 41.5 l. |
Engine oil volume | 27 l. and 24 l. | 11 % more or 3 l. |
Transmission fluid volume | 47 l. and 14 l. | 70 % more or 33 l. |
Front differential fluid volume | 45 l. and 28.4 l. | 37 % more or 16.6 l. |
Rear differential fluid volume | 56 l. and 28.4 l. | 49 % more or 27.6 l. |
Hydraulic system fluid volume | 320 l. and 115 l. | 64 % more or 205 l. |
Motor
Displacement | 9.6 l. and 7.6 l. | 21 % more or 2.0 l. |
Full power | 196.9 kW and 133 kW | 32 % more or 63.9 kW |
Effective power | 187.9 kW and 127 kW | 32 % more or 60.9 kW |
Maximum torque | 962 Nm and 811 Nm | 16 % more or 151 Nm |
Torque measured at | 1400 rev / min and 1300 rev / min | 7 % more or 100 rev |
Hydraulic system
Lowering time | 2.8 sec and 3.5 sec | 20 % less or 0.7 sec |
Gear box
Reverse gears number | 4 and 3 | 25 % more or 1 |
Maximum forward speed | 39.9 km/h and 34.6 km/h | 13 % more or 5.3 km/h |
Maximum reverse gear | 39.9 km/h and 22 km/h | 45 % more or 17.9 km/h |
9 reasons to buy John Deere 644G:
Sizes
Maximum lifting height | 3818 mm and 835 mm | 78 % more or 2983 mm |
Shovel
Breakout power | 157.1 kN and 178.8 kN | 12 % less or 21.7 kN |
Operation
Static tipping forks load | 8278.5 kg and 10200 kg | 19 % less or 1921.5 kg |
Turn radius | 5460 mm and 7380 mm | 26 % less or 1920 mm |
Generator current strength | 95 amperes and 60 amperes | 37 % more or 35 amperes |
Static bucket tipping load | 11896.8 kg and 16959.8 kg | 30 % less or 5063.0 kg |
Hydraulic system
Lifting time | 6.2 sec and 7 sec | 11 % less or 0.8 sec |
Unloading time | 1.8 sec and 1.9 sec | 5 % less or 0.1 sec |
Pump bandwidth | 263.1 l/min and 250 l/min | 5 % more or 13.1 l/min |
Neutral reasons:
Sizes
Height to cab upper part | 3687 mm and 3420 mm |
Length with forks on ground level | 8170 mm and 8287 mm |
Between tyres width | 3004 mm and 2743 mm |
Wheelbase | 3550 mm and 3200 mm |
Hinge axis maximum height | 4447 mm and 4000 mm |
Length with bucket on ground level | 8140 mm and 7830 mm |
Operation
Tyre size | 26.5-25 and 20.5-25 |
Working weight | 22314.5 kg and 15980 kg |
Operating voltage | 24 V and 12 V |
Rear axle oscillating | 30 degrees and 26 degrees |
Motor
Cylinders number | 6 and 6 |
Aspiration | turbocharging and Turbocharging with subsequent air cooling (by a cooling radiator) |
Manufacturer | Volvo and John Deere |
Model | TD102GB and 6076A |
Power measured at | 2200 rev / min and 2200 rev / min |
Hydraulic system
Type of pump | triple paddle type and gear type pump |
Overflow valve pressure | 19994.8 kPa and 20684.3 kPa |
Gear box
Transmission type | Volvo BM HT 200 automatic transmission system with power gear shifting and powershift |
Forward gears number | 4 and 4 |
Images
Sizes
5. Clearance | 487 mm | 5. Clearance | 483 mm |
6. Hinge axis maximum height | 4447 mm | 6. Hinge axis maximum height | 4000 mm |
7. Unloading ground clearance at maximum lifting | 3180 mm | 7. Unloading ground clearance at maximum lifting | 2871 mm |
9. Fork tines length | 1500 mm | 9. Fork tines length | 1372 mm |
10. Length with forks on ground level | 8170 mm | 10. Length with forks on ground level | 8287 mm |
11. Maximum lifting height | 835 mm | 11. Maximum lifting height | 3818 mm |
1. Length with bucket on ground level | 8140 mm | 1. Length with bucket on ground level | 7830 mm |
2. Between tyres width | 3004 mm | 2. Between tyres width | 2743 mm |
3. Height to cab upper part | 3687 mm | 3. Height to cab upper part | 3420 mm |
4. Wheelbase | 3550 mm | 4. Wheelbase | 3200 mm |