vs.

      Michigan L30 vs. John Deere 644H

      10 reasons to buy Michigan L30:

      Sizes

      Unloading ground clearance at maximum lifting 2810 mm and 2713 mm 3 % more or 97 mm

      Shovel

      Breakout power 54.8 kN and 128.9 kN 57 % less or 74.1 kN

      Operation

      Turn radius 5162.5 mm and 5500 mm 6 % less or 337.5 mm
      Static bucket tipping load 3690 kg and 14156.6 kg 74 % less or 10466.6 kg
      Static tipping forks load 4410 kg and 10334 kg 57 % less or 5924 kg

      Motor

      Torque measured at 1400 rev / min and 1300 rev / min 7 % more or 100 rev

      Hydraulic system

      Lifting time 5.4 sec and 6.2 sec 13 % less or 0.8 sec
      Lowering time 2.2 sec and 3 sec 27 % less or 0.8 sec
      Unloading time 1.3 sec and 1.4 sec 7 % less or 0.1 sec

      Gear box

      Maximum reverse gear 35.2 km/h and 24.9 km/h 29 % more or 10.3 km/h

      14 reasons to buy John Deere 644H:

      Sizes

      Maximum lifting height 3929 mm and 3450 mm 12 % more or 479 mm
      Clearance 461 mm and 420 mm 9 % more or 41 mm
      Fork tines length 1525 mm and 1050 mm 31 % more or 475 mm
      Radius at maximum height and unloading 1128 mm and 760 mm 33 % more or 368 mm

      Operation

      Fuel Capacity 379 l. and 95 l. 75 % more or 284 l.
      Generator current strength 55 amperes and 45 amperes 18 % more or 10 amperes

      Motor

      Maximum torque 1020 Nm and 276 Nm 73 % more or 744 Nm
      Cylinders number 6 and 4 33 % more or 2
      Displacement 8.1 l. and 3.9 l. 52 % more or 4.2 l.
      Full power 134 kW and 55.2 kW 59 % more or 78.8 kW
      Effective power 165 kW and 57.4 kW 65 % more or 107.6 kW

      Hydraulic system

      Pump bandwidth 257.4 l/min and 103 l/min 60 % more or 154.4 l/min

      Gear box

      Forward gears number 4 and 3 25 % more or 1
      Maximum forward speed 35.4 km/h and 35.2 km/h 1 % more or 0.2 km/h

      Neutral reasons:

      Sizes

      Between tyres width 1990 mm and 2874 mm
      Height to cab upper part 2780 mm and 3404 mm
      Wheelbase 2725 mm and 3200 mm
      Hinge axis maximum height 3590 mm and 4144 mm
      Length with forks on ground level 5740 mm and 8641 mm
      Length with bucket on ground level 5600 mm and 8266 mm

      Operation

      Rear axle oscillating 20 degrees and 26 degrees
      Operating voltage 24 V and 24 V
      Tyre size 15.5-25 L-2 and 23.5-25
      Working weight 5942.1 kg and 17631 kg

      Motor

      Power measured at 2200 rev / min and 2200 rev / min
      Manufacturer Perkins and John Deere
      Aspiration direct injection and turbocharging
      Model 4.2 and 6081H

      Hydraulic system

      Type of pump gear type pump and piston pump
      Overflow valve pressure 14996.1 kPa and 24850 kPa

      Gear box

      Transmission type Clark 18000 Series full mesh automatic powershift transmission and powershift
      Reverse gears number 3 and 3

      Images

      Sizes

      5. Clearance 420 mm 5. Clearance 461 mm
      6. Hinge axis maximum height 3590 mm 6. Hinge axis maximum height 4144 mm
      7. Unloading ground clearance at maximum lifting 2810 mm 7. Unloading ground clearance at maximum lifting 2713 mm
      9. Fork tines length 1050 mm 9. Fork tines length 1525 mm
      10. Length with forks on ground level 5740 mm 10. Length with forks on ground level 8641 mm
      11. Maximum lifting height 3450 mm 11. Maximum lifting height 3929 mm
      1. Length with bucket on ground level 5600 mm 1. Length with bucket on ground level 8266 mm
      2. Between tyres width 1990 mm 2. Between tyres width 2874 mm
      3. Height to cab upper part 2780 mm 3. Height to cab upper part 3404 mm
      4. Wheelbase 2725 mm 4. Wheelbase 3200 mm