- Home/
- Comparison/
- Attached Equipment/
- Michigan L50 vs. JCB 456HT Ultrahigh Lift
Michigan L50 vs. JCB 456HT Ultrahigh Lift
9 reasons to buy Michigan L50:
Sizes
Fork tines length | 1225 mm and 1220 mm | 0 % more or 5 mm |
Shovel
Breakout power | 68 kN and 152 kN | 55 % less or 84 kN |
Operation
Turn radius | 5265 mm and 7121 mm | 26 % less or 1856 mm |
Static bucket tipping load | 5438.6 kg and 9493 kg | 43 % less or 4054.4 kg |
Static tipping forks load | 3000 kg and 8314 kg | 64 % less or 5314 kg |
Hydraulic system
Lowering time | 1.9 sec and 4.1 sec | 54 % less or 2.2 sec |
Lifting time | 5.5 sec and 5.8 sec | 5 % less or 0.3 sec |
Gear box
Maximum forward speed | 39.9 km/h and 37.4 km/h | 6 % more or 2.5 km/h |
Maximum reverse gear | 24.9 km/h and 24.4 km/h | 2 % more or 0.5 km/h |
21 reasons to buy JCB 456HT Ultrahigh Lift:
Sizes
Unloading ground clearance at maximum lifting | 4034 mm and 2860 mm | 29 % more or 1174 mm |
Radius at maximum height and unloading | 1277 mm and 830 mm | 35 % more or 447 mm |
Maximum lifting height | 5160 mm and 3580 mm | 31 % more or 1580 mm |
Clearance | 470 mm and 385 mm | 18 % more or 85 mm |
Shovel
Bucket capacity with top | 3.3 m3 and 1.4 m3 | 58 % more or 1.9 m3 |
Brimmed bucket capacity | 2.6 m3 and 1.2 m3 | 54 % more or 1.4 m3 |
Operation
Fuel Capacity | 320 l. and 160 l. | 50 % more or 160 l. |
Cooling system fluid volume | 40 l. and 27 l. | 32 % more or 13 l. |
Engine oil volume | 18.9 l. and 10.5 l. | 44 % more or 8.4 l. |
Generator current strength | 70 amperes and 60 amperes | 14 % more or 10 amperes |
Transmission fluid volume | 34 l. and 22 l. | 35 % more or 12 l. |
Front differential fluid volume | 69 l. and 22.5 l. | 67 % more or 46.5 l. |
Rear differential fluid volume | 51 l. and 22.5 l. | 56 % more or 28.5 l. |
Hydraulic system fluid volume | 215 l. and 125 l. | 42 % more or 90 l. |
Motor
Full power | 160.3 kW and 67.1 kW | 58 % more or 93.2 kW |
Effective power | 154.4 kW and 61.1 kW | 60 % more or 93.3 kW |
Maximum torque | 915.2 Nm and 315 Nm | 66 % more or 600.2 Nm |
Torque measured at | 1400 rev / min and 1200 rev / min | 14 % more or 200 rev |
Cylinders number | 6 and 4 | 33 % more or 2 |
Displacement | 8.3 l. and 4.5 l. | 46 % more or 3.8 l. |
Hydraulic system
Pump bandwidth | 326 l/min and 135 l/min | 59 % more or 191 l/min |
Neutral reasons:
Sizes
Length with bucket on ground level | 6090 mm and 9450 mm |
Between tyres width | 2150 mm and 2702 mm |
Height to cab upper part | 2940 mm and 3370 mm |
Wheelbase | 2700 mm and 3300 mm |
Hinge axis maximum height | 3710 mm and 5270 mm |
Operation
Operating voltage | 24 V and 24 V |
Rear axle oscillating | 24 degrees and 25 degrees |
Tyre size | 15.5-25 (12PR) L-2 and Michelin 23.5R25 XHA L3 |
Working weight | 8101.2 kg and 21043 kg |
Motor
Power measured at | 2200 rev / min and 2200 rev / min |
Model | D 45B and QSC 8.3 |
Aspiration | direct injection and turbocharging |
Hydraulic system
Type of pump | vane pumps and twin variable displacement piston pumps |
Overflow valve pressure | 20511.9 kPa and 24993.5 kPa |
Gear box
Forward gears number | 4 and 4 |
Reverse gears number | 3 and 3 |
Transmission type | Volvo BM HT90 automatic transmission system with power gear shifting and smooth power shifting |
Images
Sizes
3. Height to cab upper part | 2940 mm | 3. Height to cab upper part | 3370 mm |
4. Wheelbase | 2700 mm | 4. Wheelbase | 3300 mm |
5. Clearance | 385 mm | 5. Clearance | 470 mm |
6. Hinge axis maximum height | 3710 mm | 6. Hinge axis maximum height | 5270 mm |
7. Unloading ground clearance at maximum lifting | 2860 mm | 7. Unloading ground clearance at maximum lifting | 4034 mm |
9. Fork tines length | 1225 mm | 9. Fork tines length | 1220 mm |
11. Maximum lifting height | 3580 mm | 11. Maximum lifting height | 5160 mm |
1. Length with bucket on ground level | 6090 mm | 1. Length with bucket on ground level | 9450 mm |
2. Between tyres width | 2150 mm | 2. Between tyres width | 2702 mm |