- Home/
- Comparison/
- Attached Equipment/
- Michigan L50B vs. JCB 412S
Michigan L50B vs. JCB 412S
11 reasons to buy Michigan L50B:
Sizes
Unloading ground clearance at maximum lifting | 2770 mm and 2700 mm | 3 % more or 70 mm |
Fork tines length | 1225 mm and 1220 mm | 0 % more or 5 mm |
Maximum lifting height | 3550 mm and 3449 mm | 3 % more or 101 mm |
Shovel
Bucket capacity with top | 1.5 m3 and 1 m3 | 33 % more or 0.5 m3 |
Operation
Fuel Capacity | 170 l. and 125 l. | 26 % more or 45 l. |
Cooling system fluid volume | 22 l. and 21.5 l. | 2 % more or 0.5 l. |
Engine oil volume | 11 l. and 10.7 l. | 3 % more or 0.3 l. |
Generator current strength | 60 amperes and 55 amperes | 8 % more or 5 amperes |
Hydraulic system
Lifting time | 4.4 sec and 4.6 sec | 4 % less or 0.2 sec |
Unloading time | 1.1 sec and 1.4 sec | 21 % less or 0.3 sec |
Gear box
Maximum reverse gear | 36.4 km/h and 26.7 km/h | 27 % more or 9.7 km/h |
17 reasons to buy JCB 412S:
Sizes
Clearance | 400 mm and 380 mm | 5 % more or 20 mm |
Radius at maximum height and unloading | 1063 mm and 1040 mm | 2 % more or 23 mm |
Shovel
Breakout power | 57.7 kN and 60.6 kN | 5 % less or 2.9 kN |
Operation
Transmission fluid volume | 24 l. and 7 l. | 71 % more or 17 l. |
Front differential fluid volume | 25 l. and 24 l. | 4 % more or 1 l. |
Rear differential fluid volume | 25 l. and 24 l. | 4 % more or 1 l. |
Hydraulic system fluid volume | 110 l. and 106 l. | 4 % more or 4 l. |
Turn radius | 5306 mm and 5400 mm | 2 % less or 94 mm |
Static bucket tipping load | 3971 kg and 4900 kg | 19 % less or 929 kg |
Static tipping forks load | 3344 kg and 6620 kg | 49 % less or 3276 kg |
Motor
Displacement | 4.4 l. and 4 l. | 9 % more or 0.4 l. |
Full power | 90.5 kW and 71.6 kW | 21 % more or 18.9 kW |
Effective power | 82 kW and 67.9 kW | 17 % more or 14.1 kW |
Maximum torque | 434 Nm and 370 Nm | 15 % more or 64 Nm |
Hydraulic system
Pump bandwidth | 390 l/min and 31.7 l/min | 92 % more or 358.3 l/min |
Lowering time | 3 sec and 3.3 sec | 9 % less or 0.3 sec |
Gear box
Maximum forward speed | 37.8 km/h and 36.4 km/h | 4 % more or 1.4 km/h |
Neutral reasons:
Sizes
Height to cab upper part | 3010 mm and 2928 mm |
Wheelbase | 2750 mm and 2700 mm |
Between tyres width | 2140 mm and 2272 mm |
Hinge axis maximum height | 3710 mm and 3635 mm |
Length with bucket on ground level | 6380 mm and 6140 mm |
Operation
Tyre size | 15.5R25 and 19.5LR24 XM27 |
Working weight | 8101.2 kg and 8182 kg |
Operating voltage | 24 V and 24 V |
Rear axle oscillating | 12 degrees and 25 degrees |
Motor
Aspiration | turbocharging and turbocharging |
Model | VME TD 40GA and 444 |
Power measured at | 2200 rev / min and 2200 rev / min |
Torque measured at | 1400 rev / min and 1400 rev / min |
Hydraulic system
Type of pump | Variable displacement piston pump, with load sensing, axial and dual gear type pump |
Overflow valve pressure | 26000.1 kPa and 21994.3 kPa |
Gear box
Transmission type | VME powershift and smooth power shifting |
Images
Sizes
6. Hinge axis maximum height | 3710 mm | 6. Hinge axis maximum height | 3635 mm |
7. Unloading ground clearance at maximum lifting | 2770 mm | 7. Unloading ground clearance at maximum lifting | 2700 mm |
9. Fork tines length | 1225 mm | 9. Fork tines length | 1220 mm |
11. Maximum lifting height | 3550 mm | 11. Maximum lifting height | 3449 mm |
1. Length with bucket on ground level | 6380 mm | 1. Length with bucket on ground level | 6140 mm |
2. Between tyres width | 2140 mm | 2. Between tyres width | 2272 mm |
3. Height to cab upper part | 3010 mm | 3. Height to cab upper part | 2928 mm |
4. Wheelbase | 2750 mm | 4. Wheelbase | 2700 mm |
5. Clearance | 380 mm | 5. Clearance | 400 mm |