- Home/
- Comparison/
- Attached Equipment/
- Michigan L50B vs. Michigan L30
Michigan L50B vs. Michigan L30
22 reasons to buy Michigan L50B:
Sizes
Fork tines length | 1225 mm and 1050 mm | 14 % more or 175 mm |
Hook maximum radius in unfolded state | 3310 mm and 3130 mm | 5 % more or 180 mm |
Maximum lifting height | 3550 mm and 3450 mm | 3 % more or 100 mm |
Hook height at maximum lifting in folded state | 5880 mm and 5795 mm | 1 % more or 85 mm |
Hook height at maximum lifting in unfolded state | 6810 mm and 6715 mm | 1 % more or 95 mm |
Hook radius at maximum lifting in folded state | 2250 mm and 2160 mm | 4 % more or 90 mm |
Hook radius at maximum lifting in unfolded state | 2900 mm and 2820 mm | 3 % more or 80 mm |
Radius at maximum height and unloading | 1040 mm and 760 mm | 27 % more or 280 mm |
Operation
Generator current strength | 60 amperes and 45 amperes | 25 % more or 15 amperes |
Fuel Capacity | 170 l. and 95 l. | 44 % more or 75 l. |
Engine oil volume | 11 l. and 8 l. | 27 % more or 3 l. |
Front differential fluid volume | 24 l. and 22 l. | 8 % more or 2 l. |
Rear differential fluid volume | 24 l. and 10 l. | 58 % more or 14 l. |
Hydraulic system fluid volume | 106 l. and 10 l. | 91 % more or 96 l. |
Motor
Full power | 71.6 kW and 55.2 kW | 23 % more or 16.4 kW |
Displacement | 4 l. and 3.9 l. | 2 % more or 0.1 l. |
Effective power | 67.9 kW and 57.4 kW | 15 % more or 10.5 kW |
Maximum torque | 370 Nm and 276 Nm | 25 % more or 94 Nm |
Hydraulic system
Lifting time | 4.4 sec and 5.4 sec | 19 % less or 1.0 sec |
Unloading time | 1.1 sec and 1.3 sec | 15 % less or 0.2 sec |
Gear box
Maximum forward speed | 36.4 km/h and 35.2 km/h | 3 % more or 1.2 km/h |
Maximum reverse gear | 36.4 km/h and 35.2 km/h | 3 % more or 1.2 km/h |
11 reasons to buy Michigan L30:
Sizes
Hook maximum radius in folded state | 5325 mm and 1590 mm | 70 % more or 3735 mm |
Clearance | 420 mm and 380 mm | 10 % more or 40 mm |
Unloading ground clearance at maximum lifting | 2810 mm and 2770 mm | 1 % more or 40 mm |
Shovel
Breakout power | 54.8 kN and 60.6 kN | 10 % less or 5.8 kN |
Operation
Turn radius | 5162.5 mm and 5400 mm | 4 % less or 237.5 mm |
Static tipping forks load | 4410 kg and 6620 kg | 33 % less or 2210 kg |
Static bucket tipping load | 3690 kg and 4900 kg | 25 % less or 1210 kg |
Cooling system fluid volume | 105 l. and 22 l. | 79 % more or 83 l. |
Transmission fluid volume | 24 l. and 7 l. | 71 % more or 17 l. |
Hydraulic system
Lowering time | 2.2 sec and 3.3 sec | 33 % less or 1.1 sec |
Pump bandwidth | 103 l/min and 31.7 l/min | 69 % more or 71.3 l/min |
Neutral reasons:
Sizes
Length with forks on ground level | 6445 mm and 5740 mm |
Between tyres width | 2140 mm and 1990 mm |
Height at maximum hook radius | 1440 mm and 1485 mm |
Height to cab upper part | 3010 mm and 2780 mm |
Wheelbase | 2750 mm and 2725 mm |
Hinge axis maximum height | 3710 mm and 3590 mm |
Length with bucket on ground level | 6380 mm and 5600 mm |
Operation
Operating voltage | 24 V and 24 V |
Tyre size | 15.5R25 and 15.5-25 L-2 |
Working weight | 8101.2 kg and 5942.1 kg |
Rear axle oscillating | 12 degrees and 20 degrees |
Motor
Cylinders number | 4 and 4 |
Aspiration | turbocharging and direct injection |
Power measured at | 2200 rev / min and 2200 rev / min |
Torque measured at | 1400 rev / min and 1400 rev / min |
Model | VME TD 40GA and 4.2 |
Hydraulic system
Type of pump | Variable displacement piston pump, with load sensing, axial and gear type pump |
Overflow valve pressure | 26000.1 kPa and 14996.1 kPa |
Gear box
Transmission type | VME powershift and Clark 18000 Series full mesh automatic powershift transmission |
Blades
Width | 2300 mm and 2130 mm |
Images
Sizes
5. Clearance | 380 mm | 5. Clearance | 420 mm |
6. Hinge axis maximum height | 3710 mm | 6. Hinge axis maximum height | 3590 mm |
7. Unloading ground clearance at maximum lifting | 2770 mm | 7. Unloading ground clearance at maximum lifting | 2810 mm |
9. Fork tines length | 1225 mm | 9. Fork tines length | 1050 mm |
10. Length with forks on ground level | 6445 mm | 10. Length with forks on ground level | 5740 mm |
11. Maximum lifting height | 3550 mm | 11. Maximum lifting height | 3450 mm |
12. Hook height at maximum lifting in folded state | 5880 mm | 12. Hook height at maximum lifting in folded state | 5795 mm |
13. Hook height at maximum lifting in unfolded state | 6810 mm | 13. Hook height at maximum lifting in unfolded state | 6715 mm |
14. Hook radius at maximum lifting in folded state | 2250 mm | 14. Hook radius at maximum lifting in folded state | 2160 mm |
15. Hook radius at maximum lifting in unfolded state | 2900 mm | 15. Hook radius at maximum lifting in unfolded state | 2820 mm |
16. Hook maximum radius in unfolded state | 3310 mm | 16. Hook maximum radius in unfolded state | 3130 mm |
17. Hook maximum radius in folded state | 1590 mm | 17. Hook maximum radius in folded state | 5325 mm |
18. Height at maximum hook radius | 1440 mm | 18. Height at maximum hook radius | 1485 mm |
1. Length with bucket on ground level | 6380 mm | 1. Length with bucket on ground level | 5600 mm |
2. Between tyres width | 2140 mm | 2. Between tyres width | 1990 mm |
3. Height to cab upper part | 3010 mm | 3. Height to cab upper part | 2780 mm |
4. Wheelbase | 2750 mm | 4. Wheelbase | 2725 mm |