vs.

      Michigan L90-I vs. JCB 408ZX

      19 reasons to buy Michigan L90-I:

      Sizes

      Radius at maximum height and unloading 1050 mm and 612 mm 42 % more or 438 mm
      Fork tines length 1225 mm and 1200 mm 2 % more or 25 mm
      Maximum lifting height 3675 mm and 3021 mm 18 % more or 654 mm
      Unloading ground clearance at maximum lifting 2810 mm and 2517 mm 10 % more or 293 mm

      Operation

      Fuel Capacity 200 l. and 100 l. 50 % more or 100 l.
      Cooling system fluid volume 38 l. and 15.5 l. 59 % more or 22.5 l.
      Engine oil volume 15 l. and 9.4 l. 37 % more or 5.6 l.
      Front differential fluid volume 27.5 l. and 9.5 l. 65 % more or 18.0 l.
      Rear differential fluid volume 27.5 l. and 10.5 l. 62 % more or 17.0 l.
      Hydraulic system fluid volume 193 l. and 85.2 l. 56 % more or 107.8 l.

      Motor

      Displacement 5.9 l. and 4.4 l. 25 % more or 1.5 l.
      Full power 108.1 kW and 55.9 kW 48 % more or 52.2 kW
      Power measured at 2200 rev / min and 2000 rev / min 9 % more or 200 rev
      Maximum torque 556 Nm and 302.3 Nm 46 % more or 253.7 Nm
      Torque measured at 1500 rev / min and 1400 rev / min 7 % more or 100 rev

      Gear box

      Forward gears number 4 and 2 50 % more or 2
      Reverse gears number 4 and 2 50 % more or 2
      Maximum forward speed 32.7 km/h and 30 km/h 8 % more or 2.7 km/h
      Maximum reverse gear 32.7 km/h and 30 km/h 8 % more or 2.7 km/h

      8 reasons to buy JCB 408ZX:

      Sizes

      Clearance 410 mm and 400 mm 2 % more or 10 mm

      Operation

      Transmission fluid volume 85 l. and 35 l. 59 % more or 50 l.
      Turn radius 3605.8 mm and 5910 mm 39 % less or 2304.2 mm
      Generator current strength 75 amperes and 45 amperes 40 % more or 30 amperes
      Static bucket tipping load 3089 kg and 9290 kg 67 % less or 6201 kg
      Static tipping forks load 1819.4 kg and 5000 kg 64 % less or 3180.6 kg

      Hydraulic system

      Lifting time 5 sec and 6.4 sec 22 % less or 1.4 sec
      Lowering time 3.2 sec and 3.5 sec 9 % less or 0.3 sec

      Neutral reasons:

      Sizes

      Hinge axis maximum height 3835 mm and 3142 mm
      Length with bucket on ground level 7180 mm and 5000 mm
      Between tyres width 2525 mm and 1752.6 mm
      Height to cab upper part 3050 mm and 2615.2 mm
      Wheelbase 3000 mm and 2000 mm

      Operation

      Tyre size 20.5-25 and 12.5x20
      Working weight 12550 kg and 4840 kg
      Operating voltage 24 V and 12 V
      Rear axle oscillating 30 degrees and 9 degrees

      Motor

      Aspiration turbocharging and natural aspiration
      Manufacturer Cummins and JCB
      Model 6 BT 5.9 and 1104C-44

      Hydraulic system

      Overflow valve pressure 20477.4 kPa and 22001.2 kPa

      Gear box

      Transmission type Clark C270 powershift and Hydro-Static Transmission

      Images

      Sizes

      6. Hinge axis maximum height 3835 mm 6. Hinge axis maximum height 3142 mm
      7. Unloading ground clearance at maximum lifting 2810 mm 7. Unloading ground clearance at maximum lifting 2517 mm
      9. Fork tines length 1225 mm 9. Fork tines length 1200 mm
      11. Maximum lifting height 3675 mm 11. Maximum lifting height 3021 mm
      1. Length with bucket on ground level 7180 mm 1. Length with bucket on ground level 5000 mm
      2. Between tyres width 2525 mm 2. Between tyres width 1752.6 mm
      3. Height to cab upper part 3050 mm 3. Height to cab upper part 2615.2 mm
      4. Wheelbase 3000 mm 4. Wheelbase 2000 mm
      5. Clearance 400 mm 5. Clearance 410 mm