- Home/
- Comparison/
- Attached Equipment/
- Michigan L90-I vs. JCB 456HT
Michigan L90-I vs. JCB 456HT
9 reasons to buy Michigan L90-I:
Sizes
Fork tines length | 1225 mm and 1220 mm | 0 % more or 5 mm |
Shovel
Breakout power | 119.9 kN and 150 kN | 20 % less or 30.1 kN |
Operation
Static bucket tipping load | 9290 kg and 14493 kg | 36 % less or 5203 kg |
Transmission fluid volume | 35 l. and 34 l. | 3 % more or 1 l. |
Static tipping forks load | 5000 kg and 11281 kg | 56 % less or 6281 kg |
Turn radius | 5910 mm and 6630 mm | 11 % less or 720 mm |
Hydraulic system
Lowering time | 3.5 sec and 4.1 sec | 15 % less or 0.6 sec |
Gear box
Reverse gears number | 4 and 3 | 25 % more or 1 |
Maximum reverse gear | 32.7 km/h and 24.4 km/h | 25 % more or 8.3 km/h |
19 reasons to buy JCB 456HT:
Sizes
Unloading ground clearance at maximum lifting | 3069 mm and 2810 mm | 8 % more or 259 mm |
Radius at maximum height and unloading | 1220 mm and 1050 mm | 14 % more or 170 mm |
Clearance | 470 mm and 400 mm | 15 % more or 70 mm |
Maximum lifting height | 4194 mm and 3675 mm | 12 % more or 519 mm |
Shovel
Brimmed bucket capacity | 2.6 m3 and 1.7 m3 | 35 % more or 0.9 m3 |
Bucket capacity with top | 3.3 m3 and 2.1 m3 | 36 % more or 1.2 m3 |
Operation
Front differential fluid volume | 69 l. and 27.5 l. | 60 % more or 41.5 l. |
Rear differential fluid volume | 51 l. and 27.5 l. | 46 % more or 23.5 l. |
Hydraulic system fluid volume | 215 l. and 193 l. | 10 % more or 22 l. |
Fuel Capacity | 320 l. and 200 l. | 37 % more or 120 l. |
Cooling system fluid volume | 40 l. and 38 l. | 5 % more or 2 l. |
Generator current strength | 70 amperes and 45 amperes | 36 % more or 25 amperes |
Engine oil volume | 18.9 l. and 15 l. | 21 % more or 3.9 l. |
Motor
Displacement | 8.3 l. and 5.9 l. | 29 % more or 2.4 l. |
Full power | 160.3 kW and 108.1 kW | 33 % more or 52.2 kW |
Maximum torque | 915.2 Nm and 556 Nm | 39 % more or 359.2 Nm |
Hydraulic system
Lifting time | 5.8 sec and 6.4 sec | 9 % less or 0.6 sec |
Unloading time | 1.2 sec and 1.5 sec | 20 % less or 0.3 sec |
Gear box
Maximum forward speed | 37.4 km/h and 32.7 km/h | 13 % more or 4.7 km/h |
Neutral reasons:
Sizes
Hinge axis maximum height | 3835 mm and 4304 mm |
Between tyres width | 2525 mm and 2702 mm |
Length with bucket on ground level | 7180 mm and 8520 mm |
Height to cab upper part | 3050 mm and 3370 mm |
Wheelbase | 3000 mm and 3300 mm |
Operation
Tyre size | 20.5-25 and Michelin 23.5R25 XHA L3 |
Working weight | 12550 kg and 20143 kg |
Operating voltage | 24 V and 24 V |
Rear axle oscillating | 30 degrees and 25 degrees |
Motor
Torque measured at | 1500 rev / min and 1500 rev / min |
Cylinders number | 6 and 6 |
Model | 6 BT 5.9 and QSC 8.3 |
Aspiration | turbocharging and turbocharging |
Power measured at | 2200 rev / min and 2200 rev / min |
Hydraulic system
Overflow valve pressure | 20477.4 kPa and 24993.5 kPa |
Gear box
Transmission type | Clark C270 powershift and smooth power shifting |
Forward gears number | 4 and 4 |
Images
Sizes
1. Length with bucket on ground level | 7180 mm | 1. Length with bucket on ground level | 8520 mm |
2. Between tyres width | 2525 mm | 2. Between tyres width | 2702 mm |
3. Height to cab upper part | 3050 mm | 3. Height to cab upper part | 3370 mm |
4. Wheelbase | 3000 mm | 4. Wheelbase | 3300 mm |
5. Clearance | 400 mm | 5. Clearance | 470 mm |
6. Hinge axis maximum height | 3835 mm | 6. Hinge axis maximum height | 4304 mm |
7. Unloading ground clearance at maximum lifting | 2810 mm | 7. Unloading ground clearance at maximum lifting | 3069 mm |
9. Fork tines length | 1225 mm | 9. Fork tines length | 1220 mm |
11. Maximum lifting height | 3675 mm | 11. Maximum lifting height | 4194 mm |