- Home/
- Comparison/
- Attached Equipment/
- Michigan L90-I vs. John Deere 444H
Michigan L90-I vs. John Deere 444H
22 reasons to buy Michigan L90-I:
Sizes
Unloading ground clearance at maximum lifting | 2810 mm and 2638 mm | 6 % more or 172 mm |
Fork tines length | 1225 mm and 1220 mm | 0 % more or 5 mm |
Maximum lifting height | 3675 mm and 3406 mm | 7 % more or 269 mm |
Hook height at maximum lifting in folded state | 6145 mm and 5375 mm | 13 % more or 770 mm |
Hook height at maximum lifting in unfolded state | 7095 mm and 6714 mm | 5 % more or 381 mm |
Clearance | 400 mm and 355 mm | 11 % more or 45 mm |
Shovel
Bucket capacity with top | 2.1 m3 and 1.9 m3 | 10 % more or 0.2 m3 |
Brimmed bucket capacity | 1.7 m3 and 1.6 m3 | 6 % more or 0.1 m3 |
Operation
Transmission fluid volume | 35 l. and 12.5 l. | 64 % more or 22.5 l. |
Front differential fluid volume | 27.5 l. and 15 l. | 45 % more or 12.5 l. |
Rear differential fluid volume | 27.5 l. and 15 l. | 45 % more or 12.5 l. |
Hydraulic system fluid volume | 193 l. and 106 l. | 45 % more or 87 l. |
Fuel Capacity | 200 l. and 180 l. | 10 % more or 20 l. |
Cooling system fluid volume | 38 l. and 19 l. | 50 % more or 19 l. |
Engine oil volume | 15 l. and 12.5 l. | 17 % more or 2.5 l. |
Motor
Torque measured at | 1500 rev / min and 1400 rev / min | 7 % more or 100 rev |
Cylinders number | 6 and 4 | 33 % more or 2 |
Displacement | 5.9 l. and 4.5 l. | 24 % more or 1.4 l. |
Full power | 108.1 kW and 86 kW | 20 % more or 22.1 kW |
Maximum torque | 556 Nm and 441 Nm | 21 % more or 115 Nm |
Gear box
Maximum reverse gear | 32.7 km/h and 26.3 km/h | 20 % more or 6.4 km/h |
Reverse gears number | 4 and 3 | 25 % more or 1 |
12 reasons to buy John Deere 444H:
Sizes
Radius at maximum height and unloading | 1095 mm and 1050 mm | 4 % more or 45 mm |
Hook radius at maximum lifting in folded state | 2178 mm and 2145 mm | 2 % more or 33 mm |
Hook radius at maximum lifting in unfolded state | 3534 mm and 2760 mm | 22 % more or 774 mm |
Shovel
Breakout power | 73.8 kN and 119.9 kN | 38 % less or 46.1 kN |
Operation
Static bucket tipping load | 7267 kg and 9290 kg | 22 % less or 2023 kg |
Static tipping forks load | 4364 kg and 5000 kg | 13 % less or 636 kg |
Turn radius | 4703 mm and 5910 mm | 20 % less or 1207 mm |
Generator current strength | 55 amperes and 45 amperes | 18 % more or 10 amperes |
Hydraulic system
Lifting time | 5 sec and 6.4 sec | 22 % less or 1.4 sec |
Unloading time | 1.1 sec and 1.5 sec | 27 % less or 0.4 sec |
Lowering time | 2.6 sec and 3.5 sec | 26 % less or 0.9 sec |
Gear box
Maximum forward speed | 40 km/h and 32.7 km/h | 18 % more or 7.3 km/h |
Neutral reasons:
Sizes
Length with bucket on ground level | 7180 mm and 6730 mm |
Hinge axis maximum height | 3835 mm and 3605 mm |
Between tyres width | 2525 mm and 2330 mm |
Height to cab upper part | 3050 mm and 3125 mm |
Wheelbase | 3000 mm and 2750 mm |
Operation
Tyre size | 20.5-25 and 17.5-25 |
Working weight | 12550 kg and 9733 kg |
Operating voltage | 24 V and 24 V |
Rear axle oscillating | 30 degrees and 24 degrees |
Motor
Manufacturer | Cummins and John Deere |
Model | 6 BT 5.9 and 4045T |
Aspiration | turbocharging and turbocharging |
Power measured at | 2200 rev / min and 2200 rev / min |
Hydraulic system
Overflow valve pressure | 20477.4 kPa and 24850 kPa |
Gear box
Transmission type | Clark C270 powershift and powershift |
Forward gears number | 4 and 4 |
Images
Sizes
1. Length with bucket on ground level | 7180 mm | 1. Length with bucket on ground level | 6730 mm |
2. Between tyres width | 2525 mm | 2. Between tyres width | 2330 mm |
3. Height to cab upper part | 3050 mm | 3. Height to cab upper part | 3125 mm |
4. Wheelbase | 3000 mm | 4. Wheelbase | 2750 mm |
5. Clearance | 400 mm | 5. Clearance | 355 mm |
6. Hinge axis maximum height | 3835 mm | 6. Hinge axis maximum height | 3605 mm |
7. Unloading ground clearance at maximum lifting | 2810 mm | 7. Unloading ground clearance at maximum lifting | 2638 mm |
9. Fork tines length | 1225 mm | 9. Fork tines length | 1220 mm |
11. Maximum lifting height | 3675 mm | 11. Maximum lifting height | 3406 mm |
12. Hook height at maximum lifting in folded state | 6145 mm | 12. Hook height at maximum lifting in folded state | 5375 mm |
13. Hook height at maximum lifting in unfolded state | 7095 mm | 13. Hook height at maximum lifting in unfolded state | 6714 mm |
14. Hook radius at maximum lifting in folded state | 2145 mm | 14. Hook radius at maximum lifting in folded state | 2178 mm |
15. Hook radius at maximum lifting in unfolded state | 2760 mm | 15. Hook radius at maximum lifting in unfolded state | 3534 mm |