- Home/
- Comparison/
- Loader-Digger/
- Case 580M Turbo vs. John Deere 315SE
Case 580M Turbo vs. John Deere 315SE
12 reasons to buy Case 580M Turbo:
Sizes
Clearance | 376 mm and 350 mm | 7 % more or 26 mm |
Operation
Transmission fluid volume | 20.8 l. and 14 l. | 33 % more or 6.8 l. |
Hydraulic system fluid volume | 106 l. and 91 l. | 14 % more or 15 l. |
Oil system fluid volume | 13.6 l. and 8.5 l. | 37 % more or 5.1 l. |
Rear axle fluid volume | 14.2 l. and 13 l. | 8 % more or 1.2 l. |
Cooling system fluid volume | 16.8 l. and 16 l. | 5 % more or 0.8 l. |
Generator current strength | 90 amperes and 65 amperes | 28 % more or 25 amperes |
Maximum weight | 7489 kg and 6670 kg | 11 % more or 819 kg |
Motor
Effective power | 60 kW and 59.7 kW | 0 % more or 0.3 kW |
Gear box
Maximum reverse gear | 47.8 km/h and 46.3 km/h | 3 % more or 1.5 km/h |
Backdigger
Digging depth in folded state | 4340 mm and 4290 mm | 1 % more or 50 mm |
Digging depth in unfolded state | 5560 mm and 5490 mm | 1 % more or 70 mm |
15 reasons to buy John Deere 315SE:
Operation
Fuel Capacity | 136 l. and 119 l. | 12 % more or 17 l. |
Front axle fluid volume | 8.5 l. and 5.5 l. | 35 % more or 3.0 l. |
Turn radius | 3570 mm and 6480 mm | 45 % less or 2910 mm |
Motor
Full power | 65.6 kW and 63 kW | 4 % more or 2.6 kW |
Maximum effective torque | 367.4 Nm and 334 Nm | 9 % more or 33.4 Nm |
Load-transfer device
Bucket breakout force | 39.6 kN and 40.8 kN | 3 % less or 1.2 kN |
Lifting capacity at full height | 3266 kg and 2804 kg | 14 % more or 462 kg |
Radius at max unloading height | 765 mm and 717 mm | 6 % more or 48 mm |
Digging depth | 206 mm and 199 mm | 3 % more or 7 mm |
Hydraulic system
Pump bandwidth | 136.3 l/min and 108 l/min | 21 % more or 28.3 l/min |
Gear box
Maximum forward speed | 41.5 km/h and 39.5 km/h | 5 % more or 2.0 km/h |
Backdigger
Loading height in folded state | 3560 mm and 3400 mm | 4 % more or 160 mm |
Loading height in unfolded state | 4340 mm and 4040 mm | 7 % more or 300 mm |
Radius at high-altitude loading in folded state | 6910 mm and 2670 mm | 61 % more or 4240 mm |
Radius at high-altitude loading in unfolded state | 8030 mm and 3500 mm | 56 % more or 4530 mm |
Neutral reasons:
Sizes
Transport height | 4170 mm and 3670 mm |
Transport length | 7070 mm and 5260 mm |
Height to cab upper part | 2720 mm and 2750 mm |
Wheelbase | 2150 mm and 2100 mm |
Transport width | 2180 mm and 2320 mm |
Operation
Front tyres size 2wd / 4wd | 11Lx16.1/12x16.5 and 11L-15,8PR F3/12.5/80-18,10PR |
Rear tyres size 2wd/4wd | 17.5Lx24/19.5Lx24 and 16.9-24,8PR R4/19.5L-24,8PRR4 |
Operating voltage | 12 V and 12 V |
Motor
Model | Family III 445T/M2, 2 level and 4045T |
Displacement | 4.5 l. and 4.5 l. |
Manufacturer | Case and John Deere |
Power measured at | 2200 rev / min and 2200 rev / min |
Cylinders number | 4 and 4 |
Effective torque increase | 33 % and 42 % |
Aspiration | turbocharging and turbocharging |
Load-transfer device
Shovel width | 2.1 mm and 2340 mm |
Ground clearance at maximum unloading height | 2640 mm and 2640 mm |
Hydraulic system
Overflow valve pressure | 0 kPa and 25000 kPa |
Type of pump | gear-type, actuated by transmission and open center, gear type |
Gear box
Transmission type | 4-speed synchronized mesh with power hydraulic clutches and 4-speed transmission with a helical gear with a clutch switch, synchronized on all transmissions with hydraulic reverser |
Forward gears number | 4 and 4 |
Reverse gears number | 4 and 4 |
Backdigger
Hinge joint radius in unfolded state | 6650 mm and 6630 mm |
Hinge joint radius in folded state | 5440 mm and 5560 mm |
Images
Sizes
1. Transport length | 7070 mm | 1. Transport length | 5260 mm |
2. Transport width | 2180 mm | 2. Transport width | 2320 mm |
3. Transport height | 4170 mm | 3. Transport height | 3670 mm |
4. Wheelbase | 2150 mm | 4. Wheelbase | 2100 mm |
5. Clearance | 376 mm | 5. Clearance | 350 mm |
6. Height to cab upper part | 2720 mm | 6. Height to cab upper part | 2750 mm |
Load-transfer device
7. Ground clearance at maximum unloading height | 2640 mm | 7. Ground clearance at maximum unloading height | 2640 mm |
8. Radius at max unloading height | 717 mm | 8. Radius at max unloading height | 765 mm |
9. Digging depth | 199 mm | 9. Digging depth | 206 mm |
Backdigger
12. Digging depth in folded state | 4340 mm | 12. Digging depth in folded state | 4290 mm |
13. Radius at high-altitude loading in folded state | 2670 mm | 13. Radius at high-altitude loading in folded state | 6910 mm |
10. Loading height in folded state | 3400 mm | 10. Loading height in folded state | 3560 mm |
11. Hinge joint radius in folded state | 5440 mm | 11. Hinge joint radius in folded state | 5560 mm |