- Home/
- Comparison/
- Loader-Digger/
- Case 580M vs. Case 590 Super N
Case 580M vs. Case 590 Super N
10 reasons to buy Case 580M:
Sizes
| Clearance | 376 mm and 360 mm | 4 % more or 16 mm |
Operation
| Rear axle fluid volume | 14.2 l. and 13.6 l. | 4 % more or 0.6 l. |
| Turn radius | 3350 mm and 3810 mm | 12 % less or 460 mm |
| Transmission fluid volume | 20.8 l. and 19.4 l. | 7 % more or 1.4 l. |
Load-transfer device
| Digging depth | 199 mm and 157 mm | 21 % more or 42 mm |
Gear box
| Reverse gears number | 4 and 3 | 25 % more or 1 |
| Maximum forward speed | 39.4 km/h and 38.9 km/h | 1 % more or 0.5 km/h |
| Maximum reverse gear | 47.6 km/h and 25.6 km/h | 46 % more or 22.0 km/h |
Backdigger
| Radius at high-altitude loading in folded state | 2670 mm and 1560 mm | 42 % more or 1110 mm |
| Radius at high-altitude loading in unfolded state | 3500 mm and 2470 mm | 29 % more or 1030 mm |
15 reasons to buy Case 590 Super N:
Operation
| Front axle fluid volume | 8.6 l. and 5.5 l. | 36 % more or 3.1 l. |
| Fuel Capacity | 159 l. and 119 l. | 25 % more or 40 l. |
| Hydraulic system fluid volume | 132 l. and 106 l. | 20 % more or 26 l. |
| Cooling system fluid volume | 18 l. and 16.8 l. | 7 % more or 1.2 l. |
| Generator current strength | 120 amperes and 90 amperes | 25 % more or 30 amperes |
Motor
| Full power | 82 kW and 60 kW | 27 % more or 22 kW |
| Effective power | 80.5 kW and 57 kW | 29 % more or 23.5 kW |
| Maximum effective torque | 515.2 Nm and 314 Nm | 39 % more or 201.2 Nm |
Load-transfer device
| Ground clearance at maximum unloading height | 2720 mm and 2640 mm | 3 % more or 80 mm |
| Radius at max unloading height | 741 mm and 717 mm | 3 % more or 24 mm |
Hydraulic system
| Pump bandwidth | 162.8 l/min and 108 l/min | 34 % more or 54.8 l/min |
Backdigger
| Digging depth in folded state | 4720 mm and 4340 mm | 8 % more or 380 mm |
| Digging depth in unfolded state | 5940 mm and 5560 mm | 6 % more or 380 mm |
| Loading height in folded state | 4000 mm and 3400 mm | 15 % more or 600 mm |
| Loading height in unfolded state | 4810 mm and 4040 mm | 16 % more or 770 mm |
Neutral reasons:
Sizes
| Transport length | 7070 mm and 7250 mm |
| Transport width | 2180 mm and 2360 mm |
| Transport height | 3420 mm and 3540 mm |
| Height to cab upper part | 2720 mm and 2710 mm |
| Wheelbase | 2150 mm and 2150 mm |
Operation
| Front tyres size 2wd / 4wd | 11Lx16.1/12x16.5 and 14x17.5 |
| Oil system fluid volume | 13.6 l. and 13.6 l. |
| Rear tyres size 2wd/4wd | 17.5Lx24/19.5Lx24 and 21Lx24 |
| Operating voltage | 12 V and 12 V |
Motor
| Aspiration | natural aspiration and turbocharging |
| Displacement | 4.5 l. and 4.5 l. |
| Power measured at | 2200 rev / min and 2200 rev / min |
| Torque measured at | 1400 rev / min and 1400 rev / min |
| Effective torque increase | 23 % and 45 % |
| Cylinders number | 4 and 4 |
| Manufacturer | Case and Case |
| Model | Family III 445/M2, 2 level and 445TA/E3 |
Load-transfer device
| Shovel width | 2080 mm and 2362.2 mm |
Hydraulic system
| Overflow valve pressure | 146 kPa and 23786.9 kPa |
Gear box
| Transmission type | 4-speed synchronized mesh with power hydraulic clutches and powershift transmission |
| Forward gears number | 4 and 4 |
Backdigger
| Hinge joint radius in folded state | 5440 mm and 5980 mm |
| Hinge joint radius in unfolded state | 6650 mm and 7170 mm |
Images
Sizes
| 1. Transport length | 7070 mm | 1. Transport length | 7250 mm |
| 2. Transport width | 2180 mm | 2. Transport width | 2360 mm |
| 3. Transport height | 3420 mm | 3. Transport height | 3540 mm |
| 4. Wheelbase | 2150 mm | 4. Wheelbase | 2150 mm |
| 5. Clearance | 376 mm | 5. Clearance | 360 mm |
| 6. Height to cab upper part | 2720 mm | 6. Height to cab upper part | 2710 mm |
Load-transfer device
| 7. Ground clearance at maximum unloading height | 2640 mm | 7. Ground clearance at maximum unloading height | 2720 mm |
| 8. Radius at max unloading height | 717 mm | 8. Radius at max unloading height | 741 mm |
| 9. Digging depth | 199 mm | 9. Digging depth | 157 mm |
Backdigger
| 10. Loading height in folded state | 3400 mm | 10. Loading height in folded state | 4000 mm |
| 11. Hinge joint radius in folded state | 5440 mm | 11. Hinge joint radius in folded state | 5980 mm |
| 12. Digging depth in folded state | 4340 mm | 12. Digging depth in folded state | 4720 mm |
| 13. Radius at high-altitude loading in folded state | 2670 mm | 13. Radius at high-altitude loading in folded state | 1560 mm |