vs.

      Case 590 Super M+ serie III vs. John Deere 315C

      25 reasons to buy Case 590 Super M+ serie III:

      Sizes

      Clearance 375 mm and 350 mm 7 % more or 25 mm

      Operation

      Generator current strength 90 amperes and 65 amperes 28 % more or 25 amperes
      Maximum weight 8881 kg and 6281 kg 29 % more or 2600 kg
      Fuel Capacity 159 l. and 98 l. 38 % more or 61 l.
      Hydraulic system fluid volume 127.6 l. and 79 l. 38 % more or 48.6 l.
      Oil system fluid volume 13.6 l. and 8.5 l. 37 % more or 5.1 l.
      Cooling system fluid volume 18 l. and 16 l. 11 % more or 2 l.
      Transmission fluid volume 19.4 l. and 7 l. 64 % more or 12.4 l.

      Motor

      Displacement 4.5 l. and 3.9 l. 13 % more or 0.6 l.
      Full power 82 kW and 52.9 kW 35 % more or 29.1 kW
      Effective power 81 kW and 50 kW 38 % more or 31 kW
      Torque measured at 1400 rev / min and 1200 rev / min 14 % more or 200 rev
      Maximum effective torque 504.4 Nm and 260.3 Nm 48 % more or 244.1 Nm

      Load-transfer device

      Bucket breakout force 47.7 kN and 4241 kN 99 % less or 4193.3 kN
      Lifting capacity at full height 3323 kg and 2585 kg 22 % more or 738 kg

      Hydraulic system

      Pump bandwidth 161 l/min and 133 l/min 17 % more or 28 l/min

      Gear box

      Maximum forward speed 41.1 km/h and 40.7 km/h 1 % more or 0.4 km/h
      Maximum reverse gear 49.4 km/h and 36.6 km/h 26 % more or 12.8 km/h

      Backdigger

      Bucket digging force in unfolded state 6676 kg and 5200 kg 22 % more or 1476 kg
      Load at maximum lifting in folded state 1501 kg and 1820 kg 18 % less or 319 kg
      Load at maximum lifting in unfolded state 880 kg and 1680 kg 48 % less or 800 kg
      Loading height in unfolded state 4190 mm and 3580 mm 15 % more or 610 mm
      Digging depth in folded state 4850 mm and 4290 mm 12 % more or 560 mm
      Digging depth in unfolded state 6070 mm and 5130 mm 15 % more or 940 mm
      Bucket digging force in folded state 6676 kg and 5260 kg 21 % more or 1416 kg

      7 reasons to buy John Deere 315C:

      Operation

      Turn radius 300 mm and 3758.2 mm 92 % less or 3458.2 mm
      Front axle fluid volume 23 l. and 6.7 l. 71 % more or 16.3 l.

      Load-transfer device

      Ground clearance at maximum unloading height 3510 mm and 2750 mm 22 % more or 760 mm
      Digging depth 5490 mm and 96 mm 98 % more or 5394 mm

      Backdigger

      Loading height in folded state 3510 mm and 3480 mm 1 % more or 30 mm
      Radius at high-altitude loading in folded state 6590 mm and 2900 mm 56 % more or 3690 mm
      Radius at high-altitude loading in unfolded state 7700 mm and 3890 mm 49 % more or 3810 mm

      Neutral reasons:

      Sizes

      Transport length 7190 mm and 5510 mm
      Transport width 2360 mm and 2350 mm
      Transport height 3540 mm and 3760 mm
      Height to cab upper part 2690 mm and 2620 mm
      Wheelbase 2150 mm and 2100 mm

      Operation

      Front tyres size 2wd / 4wd 14.5/75x16.1 10 layers / 14x17.5 10 layers and 11L-16,8PRF3/10.5/-18,8PRTG2
      Rear tyres size 2wd/4wd 21Lx24 10 layers / 21Lx24 10 layers and 16.9-28,10PR,R1/R4
      Operating voltage 12 V and 12 V

      Motor

      Model Family IV 445TA/E3 diesel, III Level III certified and 4039D
      Power measured at 2200 rev / min and 2200 rev / min
      Cylinders number 4 and 4
      Effective torque increase 45 % and 20 %
      Manufacturer Case and John Deere

      Load-transfer device

      Shovel width 2362.2 mm and 2340 mm

      Hydraulic system

      Type of pump variable displacement piston pump and open center, gear type
      Overflow valve pressure 20684.3 kPa and 18620 kPa

      Gear box

      Transmission type synchronizer and 4-speed transmission with a helical gear with a clutch switch, synchronized on all transmissions with hydraulic reverser
      Forward gears number 4 and 4
      Reverse gears number 4 and 4

      Backdigger

      Hinge joint radius in folded state 5990 mm and 5320 mm
      Hinge joint radius in unfolded state 7190 mm and 6410 mm

      Images

      Sizes

      5. Clearance 375 mm 5. Clearance 350 mm
      6. Height to cab upper part 2690 mm 6. Height to cab upper part 2620 mm
      1. Transport length 7190 mm 1. Transport length 5510 mm
      2. Transport width 2360 mm 2. Transport width 2350 mm
      3. Transport height 3540 mm 3. Transport height 3760 mm
      4. Wheelbase 2150 mm 4. Wheelbase 2100 mm

      Load-transfer device

      7. Ground clearance at maximum unloading height 2750 mm 7. Ground clearance at maximum unloading height 3510 mm
      9. Digging depth 96 mm 9. Digging depth 5490 mm

      Backdigger

      10. Loading height in folded state 3480 mm 10. Loading height in folded state 3510 mm
      11. Hinge joint radius in folded state 5990 mm 11. Hinge joint radius in folded state 5320 mm
      12. Digging depth in folded state 4850 mm 12. Digging depth in folded state 4290 mm
      13. Radius at high-altitude loading in folded state 2900 mm 13. Radius at high-altitude loading in folded state 6590 mm