- Home/
- Comparison/
- Loader-Digger/
- Case 590 Super M vs. Caterpillar 428E
Case 590 Super M vs. Caterpillar 428E
18 reasons to buy Case 590 Super M:
Operation
Cooling system fluid volume | 18 l. and 15.9 l. | 12 % more or 2.1 l. |
Transmission fluid volume | 20.8 l. and 18.5 l. | 11 % more or 2.3 l. |
Turn radius | 3755 mm and 5400 mm | 30 % less or 1645 mm |
Fuel Capacity | 159 l. and 145 l. | 9 % more or 14 l. |
Hydraulic system fluid volume | 130 l. and 38 l. | 71 % more or 92 l. |
Motor
Effective power | 73 kW and 67.9 kW | 7 % more or 5.1 kW |
Displacement | 4.5 l. and 4.4 l. | 2 % more or 0.1 l. |
Full power | 74 kW and 70.1 kW | 5 % more or 3.9 kW |
Load-transfer device
Lifting capacity at full height | 3323 kg and 3318 kg | 0 % more or 5 kg |
Ground clearance at maximum unloading height | 2750 mm and 2668 mm | 3 % more or 82 mm |
Digging depth | 96 mm and 91 mm | 5 % more or 5 mm |
Bucket breakout force | 47.7 kN and 50 kN | 5 % less or 2.3 kN |
Hydraulic system
Pump bandwidth | 161 l/min and 125 l/min | 22 % more or 36 l/min |
Gear box
Maximum forward speed | 41 km/h and 40 km/h | 2 % more or 1 km/h |
Maximum reverse gear | 49.6 km/h and 40 km/h | 19 % more or 9.6 km/h |
Backdigger
Load at maximum lifting in unfolded state | 880 kg and 4252 kg | 79 % less or 3372 kg |
Digging depth in unfolded state | 6070 mm and 5976 mm | 2 % more or 94 mm |
Load at maximum lifting in folded state | 1302 kg and 3743 kg | 65 % less or 2441 kg |
6 reasons to buy Caterpillar 428E:
Operation
Front axle fluid volume | 11 l. and 6.5 l. | 41 % more or 4.5 l. |
Rear axle fluid volume | 16.5 l. and 14.2 l. | 14 % more or 2.3 l. |
Maximum weight | 10200 kg and 8881 kg | 13 % more or 1319 kg |
Backdigger
Loading height in folded state | 3743 mm and 3480 mm | 7 % more or 263 mm |
Loading height in unfolded state | 4252 mm and 4190 mm | 1 % more or 62 mm |
Digging depth in folded state | 4953 mm and 4850 mm | 2 % more or 103 mm |
Neutral reasons:
Sizes
Wheelbase | 2150 mm and 2200 mm |
Transport length | 7130 mm and 5810 mm |
Transport width | 2360 mm and 2352 mm |
Transport height | 4320 mm and 3717 mm |
Height to cab upper part | 2690 mm and 2863 mm |
Motor
Manufacturer | Case and Caterpillar |
Model | Family III 445T/M2, 2 level and 3054C |
Power measured at | 2200 rev / min and 2200 rev / min |
Cylinders number | 4 and 4 |
Effective torque increase | 24 % and 35 % |
Load-transfer device
Shovel width | 2360 mm and 2262 mm |
Hydraulic system
Type of pump | series coupling of gear type, actuated by transmission and variable displacement axial piston pump |
Overflow valve pressure | 21029 kPa and 1565.1 kPa |
Gear box
Reverse gears number | 4 and 4 |
Transmission type | 4-speed synchronized mesh with power hydraulic clutches and Caterpillar servodrive |
Forward gears number | 4 and 4 |
Backdigger
Hinge joint radius in folded state | 5990 mm and 5588 mm |
Images
Sizes
1. Transport length | 7130 mm | 1. Transport length | 5810 mm |
2. Transport width | 2360 mm | 2. Transport width | 2352 mm |
3. Transport height | 4320 mm | 3. Transport height | 3717 mm |
4. Wheelbase | 2150 mm | 4. Wheelbase | 2200 mm |
6. Height to cab upper part | 2690 mm | 6. Height to cab upper part | 2863 mm |
Load-transfer device
7. Ground clearance at maximum unloading height | 2750 mm | 7. Ground clearance at maximum unloading height | 2668 mm |
9. Digging depth | 96 mm | 9. Digging depth | 91 mm |
Backdigger
10. Loading height in folded state | 3480 mm | 10. Loading height in folded state | 3743 mm |
11. Hinge joint radius in folded state | 5990 mm | 11. Hinge joint radius in folded state | 5588 mm |
12. Digging depth in folded state | 4850 mm | 12. Digging depth in folded state | 4953 mm |