vs.

      Case 590 Super N vs. John Deere 710C

      11 reasons to buy Case 590 Super N:

      Sizes

      Clearance 360 mm and 356 mm 1 % more or 4 mm

      Operation

      Fuel Capacity 159 l. and 140 l. 12 % more or 19 l.
      Turn radius 3810 mm and 4370 mm 13 % less or 560 mm
      Generator current strength 120 amperes and 78 amperes 35 % more or 42 amperes

      Motor

      Maximum effective torque 515.2 Nm and 465 Nm 10 % more or 50.2 Nm

      Load-transfer device

      Radius at max unloading height 741 mm and 737 mm 1 % more or 4 mm
      Digging depth 157 mm and 100 mm 36 % more or 57 mm

      Gear box

      Reverse gears number 3 and 2 33 % more or 1
      Maximum forward speed 38.9 km/h and 33.9 km/h 13 % more or 5.0 km/h
      Maximum reverse gear 25.6 km/h and 10.6 km/h 59 % more or 15.0 km/h

      Backdigger

      Loading height in unfolded state 4810 mm and 4570 mm 5 % more or 240 mm

      16 reasons to buy John Deere 710C:

      Operation

      Hydraulic system fluid volume 151 l. and 132 l. 13 % more or 19 l.
      Oil system fluid volume 19 l. and 13.6 l. 28 % more or 5.4 l.
      Cooling system fluid volume 26 l. and 18 l. 31 % more or 8 l.
      Transmission fluid volume 23 l. and 19.4 l. 16 % more or 3.6 l.
      Rear axle fluid volume 17 l. and 13.6 l. 20 % more or 3.4 l.

      Motor

      Cylinders number 6 and 4 33 % more or 2
      Effective power 85.8 kW and 80.5 kW 6 % more or 5.3 kW
      Full power 89.5 kW and 82 kW 8 % more or 7.5 kW
      Displacement 5.9 l. and 4.5 l. 24 % more or 1.4 l.

      Load-transfer device

      Ground clearance at maximum unloading height 2920 mm and 2720 mm 7 % more or 200 mm

      Hydraulic system

      Pump bandwidth 201 l/min and 162.8 l/min 19 % more or 38.2 l/min

      Backdigger

      Digging depth in folded state 5490 mm and 4720 mm 14 % more or 770 mm
      Digging depth in unfolded state 6930 mm and 5940 mm 14 % more or 990 mm
      Loading height in folded state 4014.2 mm and 4000 mm 0 % more or 14.2 mm
      Radius at high-altitude loading in folded state 8150 mm and 1560 mm 81 % more or 6590 mm
      Radius at high-altitude loading in unfolded state 9500 mm and 2470 mm 74 % more or 7030 mm

      Neutral reasons:

      Sizes

      Transport length 7250 mm and 8129 mm
      Transport width 2360 mm and 2440 mm
      Transport height 3540 mm and 4014.2 mm
      Height to cab upper part 2710 mm and 2691.4 mm
      Wheelbase 2150 mm and 2400 mm

      Operation

      Front tyres size 2wd / 4wd 14x17.5 and 14.5/75-16.1,10PR F3
      Rear tyres size 2wd/4wd 21Lx24 and 21L-24,16PR R4/20.5-25,12PR R4
      Operating voltage 12 V and 12 V

      Motor

      Power measured at 2200 rev / min and 2200 rev / min
      Effective torque increase 45 % and 25 %
      Manufacturer Case and John Deere
      Model 445TA/E3 and 6059T

      Load-transfer device

      Shovel width 2362.2 mm and 2440 mm

      Hydraulic system

      Overflow valve pressure 23786.9 kPa and 17500 kPa

      Gear box

      Transmission type powershift transmission and Powershift with a modular switching under full load between the front and rear transmission
      Forward gears number 4 and 4

      Backdigger

      Hinge joint radius in folded state 5980 mm and 6900 mm
      Hinge joint radius in unfolded state 7170 mm and 4570 mm

      Images

      Sizes

      1. Transport length 7250 mm 1. Transport length 8129 mm
      2. Transport width 2360 mm 2. Transport width 2440 mm
      3. Transport height 3540 mm 3. Transport height 4014.2 mm
      4. Wheelbase 2150 mm 4. Wheelbase 2400 mm
      5. Clearance 360 mm 5. Clearance 356 mm
      6. Height to cab upper part 2710 mm 6. Height to cab upper part 2691.4 mm

      Load-transfer device

      7. Ground clearance at maximum unloading height 2720 mm 7. Ground clearance at maximum unloading height 2920 mm
      8. Radius at max unloading height 741 mm 8. Radius at max unloading height 737 mm
      9. Digging depth 157 mm 9. Digging depth 100 mm

      Backdigger

      10. Loading height in folded state 4000 mm 10. Loading height in folded state 4014.2 mm
      11. Hinge joint radius in folded state 5980 mm 11. Hinge joint radius in folded state 6900 mm
      12. Digging depth in folded state 4720 mm 12. Digging depth in folded state 5490 mm
      13. Radius at high-altitude loading in folded state 1560 mm 13. Radius at high-altitude loading in folded state 8150 mm