vs.

      Caterpillar 428D vs. John Deere 610C

      2 reasons to buy Caterpillar 428D:

      Operation

      Fuel Capacity 128 l. and 87.1 l. 32 % more or 40.9 l.

      Hydraulic system

      Pump bandwidth 163 l/min and 45.4 l/min 72 % more or 117.6 l/min

      3 reasons to buy John Deere 610C:

      Motor

      Effective power 70.8 kW and 59.7 kW 16 % more or 11.1 kW
      Displacement 4.5 l. and 4 l. 11 % more or 0.5 l.

      Gear box

      Forward gears number 8 and 4 50 % more or 4

      Neutral reasons:

      Sizes

      Transport length 5760 mm and 7086.6 mm
      Transport width 2396 mm and 2158 mm
      Transport height 3740 mm and 3352.8 mm

      Operation

      Front tyres size 2wd / 4wd 12.5/80x18,10PR and 12-16.5,8PR F3
      Rear tyres size 2wd/4wd 16.9x28,10PR and 19.5L-24,12PR R4

      Motor

      Manufacturer Caterpillar and John Deere
      Model 3054T and 300 lot
      Power measured at 2200 rev / min and 2200 rev / min
      Cylinders number 4 and 4

      Hydraulic system

      Type of pump load sensing, pressure control, with locking in the middle position and with locking in the middle position
      Overflow valve pressure 22800 kPa and 10342.1 kPa

      Gear box

      Reverse gears number 4 and 4
      Transmission type servodrive and powershift transmission

      Images

      Sizes

      1. Transport length 5760 mm 1. Transport length 7086.6 mm
      2. Transport width 2396 mm 2. Transport width 2158 mm
      3. Transport height 3740 mm 3. Transport height 3352.8 mm