vs.

      Caterpillar 428E vs. Case 580 Super M+ serie III

      8 reasons to buy Caterpillar 428E:

      Operation

      Maximum weight 10200 kg and 8223 kg 19 % more or 1977 kg
      Front axle fluid volume 11 l. and 6.3 l. 43 % more or 4.7 l.

      Load-transfer device

      Digging depth 91 mm and 33 mm 64 % more or 58 mm
      Lifting capacity at full height 3318 kg and 2804 kg 15 % more or 514 kg

      Backdigger

      Digging depth in folded state 4953 mm and 4520 mm 9 % more or 433 mm
      Digging depth in unfolded state 5976 mm and 5560 mm 7 % more or 416 mm
      Loading height in folded state 3743 mm and 3480 mm 7 % more or 263 mm
      Loading height in unfolded state 4252 mm and 4040 mm 5 % more or 212 mm

      16 reasons to buy Case 580 Super M+ serie III:

      Operation

      Rear axle fluid volume 18.6 l. and 16.5 l. 11 % more or 2.1 l.
      Turn radius 3425 mm and 5400 mm 37 % less or 1975 mm
      Fuel Capacity 159 l. and 145 l. 9 % more or 14 l.
      Hydraulic system fluid volume 117.2 l. and 38 l. 68 % more or 79.2 l.
      Cooling system fluid volume 18 l. and 15.9 l. 12 % more or 2.1 l.
      Transmission fluid volume 19.4 l. and 18.5 l. 5 % more or 0.9 l.

      Motor

      Full power 72 kW and 70.1 kW 3 % more or 1.9 kW
      Displacement 4.5 l. and 4.4 l. 2 % more or 0.1 l.
      Effective power 71 kW and 67.9 kW 4 % more or 3.1 kW

      Load-transfer device

      Bucket breakout force 40.8 kN and 50 kN 18 % less or 9.2 kN
      Ground clearance at maximum unloading height 2800 mm and 2668 mm 5 % more or 132 mm

      Hydraulic system

      Pump bandwidth 151 l/min and 125 l/min 17 % more or 26 l/min

      Gear box

      Maximum forward speed 40.9 km/h and 40 km/h 2 % more or 0.9 km/h
      Maximum reverse gear 49.1 km/h and 40 km/h 19 % more or 9.1 km/h

      Backdigger

      Load at maximum lifting in folded state 1066 kg and 3743 kg 72 % less or 2677 kg
      Load at maximum lifting in unfolded state 612 kg and 4252 kg 86 % less or 3640 kg

      Neutral reasons:

      Sizes

      Transport length 5810 mm and 6950 mm
      Transport width 2352 mm and 2360 mm
      Transport height 3717 mm and 3440 mm
      Height to cab upper part 2863 mm and 2730 mm
      Wheelbase 2200 mm and 2150 mm

      Operation

      Working weight 4wd 7570 kg and 6761 kg

      Motor

      Cylinders number 4 and 4
      Effective torque increase 35 % and 45 %
      Power measured at 2200 rev / min and 2200 rev / min
      Manufacturer Caterpillar and Case
      Model 3054C and Family IV 445TA/E3, III Level III certified

      Load-transfer device

      Shovel width 2262 mm and 2360 mm

      Hydraulic system

      Overflow valve pressure 1565.1 kPa and 20684.3 kPa
      Type of pump variable displacement axial piston pump and variable displacement piston pump

      Gear box

      Transmission type Caterpillar servodrive and 4-speed synchronized mesh with power hydraulic clutches
      Forward gears number 4 and 4
      Reverse gears number 4 and 4

      Backdigger

      Hinge joint radius in folded state 5588 mm and 5610 mm

      Images

      Sizes

      3. Transport height 3717 mm 3. Transport height 3440 mm
      4. Wheelbase 2200 mm 4. Wheelbase 2150 mm
      6. Height to cab upper part 2863 mm 6. Height to cab upper part 2730 mm
      1. Transport length 5810 mm 1. Transport length 6950 mm
      2. Transport width 2352 mm 2. Transport width 2360 mm

      Load-transfer device

      7. Ground clearance at maximum unloading height 2668 mm 7. Ground clearance at maximum unloading height 2800 mm
      9. Digging depth 91 mm 9. Digging depth 33 mm

      Backdigger

      10. Loading height in folded state 3743 mm 10. Loading height in folded state 3480 mm
      11. Hinge joint radius in folded state 5588 mm 11. Hinge joint radius in folded state 5610 mm
      12. Digging depth in folded state 4953 mm 12. Digging depth in folded state 4520 mm