- Home/
- Comparison/
- Loader-Digger/
- John Deere 110 TLB vs. Caterpillar 428C
John Deere 110 TLB vs. Caterpillar 428C
4 reasons to buy John Deere 110 TLB:
Operation
Turn radius | 3568 mm and 8100 mm | 56 % less or 4532 mm |
Generator current strength | 55 amperes and 52 amperes | 5 % more or 3 amperes |
Transmission fluid volume | 57 l. and 15 l. | 74 % more or 42 l. |
Motor
Power measured at | 2600 rev / min and 2200 rev / min | 15 % more or 400 rev |
11 reasons to buy Caterpillar 428C:
Operation
Maximum weight | 9700 kg and 3302 kg | 66 % more or 6398 kg |
Fuel Capacity | 128 l. and 58 l. | 55 % more or 70 l. |
Hydraulic system fluid volume | 79 l. and 57 l. | 28 % more or 22 l. |
Oil system fluid volume | 7.3 l. and 4.9 l. | 33 % more or 2.4 l. |
Cooling system fluid volume | 18.9 l. and 9 l. | 52 % more or 9.9 l. |
Motor
Displacement | 4 l. and 2.2 l. | 45 % more or 1.8 l. |
Effective power | 58.2 kW and 30.6 kW | 47 % more or 27.6 kW |
Full power | 55.9 kW and 32.1 kW | 43 % more or 23.8 kW |
Hydraulic system
Pump bandwidth | 163 l/min and 89.3 l/min | 45 % more or 73.7 l/min |
Backdigger
Digging depth in folded state | 4766 mm and 3073 mm | 36 % more or 1693 mm |
Loading height in folded state | 3803 mm and 2567 mm | 33 % more or 1236 mm |
Neutral reasons:
Sizes
Wheelbase | 1815 mm and 2100 mm |
Operation
Operating voltage | 12 V and 12 V |
Front tyres size 2wd / 4wd | 10 x 16.5, 8 PR and 11 x 16 / 10.5 x 20 |
Rear tyres size 2wd/4wd | 17.5L x 24, 8 PR and 16.9 x 28 |
Motor
Cylinders number | 4 and 4 |
Manufacturer | Yanmar and Caterpillar |
Model | TNV88 and 3054 |
Load-transfer device
Shovel width | 1829 mm and 2396 mm |
Hydraulic system
Type of pump | system with open center and piston pump |
Overflow valve pressure | 20684.3 kPa and 20700 kPa |
Images
Sizes
4. Wheelbase | 1815 mm | 4. Wheelbase | 2100 mm |
Backdigger
10. Loading height in folded state | 2567 mm | 10. Loading height in folded state | 3803 mm |
12. Digging depth in folded state | 3073 mm | 12. Digging depth in folded state | 4766 mm |