- Home/
- Comparison/
- Loader-Digger/
- John Deere 315SE vs. John Deere 310SG
John Deere 315SE vs. John Deere 310SG
12 reasons to buy John Deere 315SE:
Sizes
Clearance | 350 mm and 305 mm | 13 % more or 45 mm |
Operation
Front axle fluid volume | 8.5 l. and 7.6 l. | 11 % more or 0.9 l. |
Motor
Power measured at | 2200 rev / min and 2000 rev / min | 9 % more or 200 rev |
Load-transfer device
Digging depth | 206 mm and 147 mm | 29 % more or 59 mm |
Bucket breakout force | 39.6 kN and 45.4 kN | 13 % less or 5.8 kN |
Hydraulic system
Pump bandwidth | 136.3 l/min and 106 l/min | 22 % more or 30.3 l/min |
Gear box
Maximum forward speed | 41.5 km/h and 33 km/h | 20 % more or 8.5 km/h |
Maximum reverse gear | 46.3 km/h and 33 km/h | 29 % more or 13.3 km/h |
Backdigger
Radius at high-altitude loading in unfolded state | 8030 mm and 7720 mm | 4 % more or 310 mm |
Loading height in folded state | 3560 mm and 3430 mm | 4 % more or 130 mm |
Loading height in unfolded state | 4340 mm and 4290 mm | 1 % more or 50 mm |
Radius at high-altitude loading in folded state | 6910 mm and 6630 mm | 4 % more or 280 mm |
11 reasons to buy John Deere 310SG:
Operation
Maximum weight | 7237 kg and 6670 kg | 8 % more or 567 kg |
Oil system fluid volume | 13 l. and 8.5 l. | 35 % more or 4.5 l. |
Transmission fluid volume | 15 l. and 14 l. | 7 % more or 1 l. |
Rear axle fluid volume | 16 l. and 13 l. | 19 % more or 3 l. |
Motor
Maximum effective torque | 374.2 Nm and 367.4 Nm | 2 % more or 6.8 Nm |
Full power | 67.9 kW and 65.6 kW | 3 % more or 2.3 kW |
Load-transfer device
Lifting capacity at full height | 3332 kg and 3266 kg | 2 % more or 66 kg |
Ground clearance at maximum unloading height | 3400 mm and 2640 mm | 22 % more or 760 mm |
Radius at max unloading height | 911 mm and 765 mm | 16 % more or 146 mm |
Backdigger
Digging depth in unfolded state | 5610 mm and 5490 mm | 2 % more or 120 mm |
Digging depth in folded state | 4420 mm and 4290 mm | 3 % more or 130 mm |
Neutral reasons:
Sizes
Transport length | 5260 mm and 7160 mm |
Transport width | 2320 mm and 2180 mm |
Transport height | 3670 mm and 3510 mm |
Height to cab upper part | 2750 mm and 2790 mm |
Wheelbase | 2100 mm and 2100 mm |
Operation
Operating voltage | 12 V and 12 V |
Generator current strength | 65 amperes and 65 amperes |
Working weight 4wd | 263 kg and 6124 kg |
Fuel Capacity | 136 l. and 136 l. |
Hydraulic system fluid volume | 91 l. and 91 l. |
Cooling system fluid volume | 16 l. and 16 l. |
Turn radius | 3570 mm and 3570 mm |
Front tyres size 2wd / 4wd | 11L-15,8PR F3/12.5/80-18,10PR and 11L-15,8PRF3;11L-16,12PRF3;12.5/80 |
Rear tyres size 2wd/4wd | 16.9-24,8PR R4/19.5L-24,8PRR4 and 16.9-24,8PRR4;19.5L-24,8PRR4 |
Motor
Effective torque increase | 42 % and 36 % |
Aspiration | turbocharging and turbocharging |
Manufacturer | John Deere and John Deere |
Model | 4045T and 4045T |
Load-transfer device
Bucket volume | 1 m3 and 1 m3 |
Shovel width | 2340 mm and 2390 mm |
Hydraulic system
Overflow valve pressure | 25000 kPa and 25000 kPa |
Type of pump | open center, gear type and open center, gear type |
Gear box
Forward gears number | 4 and 4 |
Reverse gears number | 4 and 4 |
Transmission type | 4-speed transmission with a helical gear with a clutch switch, synchronized on all transmissions with hydraulic reverser and 4-speed, helical gear, power shift transmission under full load |
Backdigger
Hinge joint radius in folded state | 5560 mm and 5560 mm |
Hinge joint radius in unfolded state | 6630 mm and 6680 mm |
Bucket digging force in folded state | 5438.6 kg and 5438.6 kg |
Bucket digging force in unfolded state | 5514.8 kg and 5514.8 kg |
Images
Sizes
1. Transport length | 5260 mm | 1. Transport length | 7160 mm |
2. Transport width | 2320 mm | 2. Transport width | 2180 mm |
3. Transport height | 3670 mm | 3. Transport height | 3510 mm |
4. Wheelbase | 2100 mm | 4. Wheelbase | 2100 mm |
5. Clearance | 350 mm | 5. Clearance | 305 mm |
6. Height to cab upper part | 2750 mm | 6. Height to cab upper part | 2790 mm |
Load-transfer device
7. Ground clearance at maximum unloading height | 2640 mm | 7. Ground clearance at maximum unloading height | 3400 mm |
8. Radius at max unloading height | 765 mm | 8. Radius at max unloading height | 911 mm |
9. Digging depth | 206 mm | 9. Digging depth | 147 mm |
Backdigger
10. Loading height in folded state | 3560 mm | 10. Loading height in folded state | 3430 mm |
11. Hinge joint radius in folded state | 5560 mm | 11. Hinge joint radius in folded state | 5560 mm |
12. Digging depth in folded state | 4290 mm | 12. Digging depth in folded state | 4420 mm |
13. Radius at high-altitude loading in folded state | 6910 mm | 13. Radius at high-altitude loading in folded state | 6630 mm |