- Home/
- Comparison/
- Loader-Digger/
- John Deere 410B vs. Case 580M Turbo
John Deere 410B vs. Case 580M Turbo
8 reasons to buy John Deere 410B:
Operation
Turn radius | 3120 mm and 6480 mm | 52 % less or 3360 mm |
Motor
Power measured at | 2500 rev / min and 2200 rev / min | 12 % more or 300 rev |
Load-transfer device
Ground clearance at maximum unloading height | 2740 mm and 2640 mm | 4 % more or 100 mm |
Backdigger
Loading height in folded state | 3590 mm and 3400 mm | 5 % more or 190 mm |
Radius at high-altitude loading in folded state | 6530 mm and 2670 mm | 59 % more or 3860 mm |
Radius at high-altitude loading in unfolded state | 7750 mm and 3500 mm | 55 % more or 4250 mm |
Digging depth in folded state | 4420 mm and 4340 mm | 2 % more or 80 mm |
Digging depth in unfolded state | 5640 mm and 5560 mm | 1 % more or 80 mm |
23 reasons to buy Case 580M Turbo:
Sizes
Clearance | 376 mm and 305 mm | 19 % more or 71 mm |
Operation
Cooling system fluid volume | 16.8 l. and 16 l. | 5 % more or 0.8 l. |
Transmission fluid volume | 20.8 l. and 13 l. | 37 % more or 7.8 l. |
Generator current strength | 90 amperes and 35 amperes | 61 % more or 55 amperes |
Maximum weight | 7489 kg and 6545 kg | 13 % more or 944 kg |
Fuel Capacity | 119 l. and 87 l. | 27 % more or 32 l. |
Hydraulic system fluid volume | 106 l. and 72 l. | 32 % more or 34 l. |
Oil system fluid volume | 13.6 l. and 8.5 l. | 37 % more or 5.1 l. |
Motor
Effective power | 60 kW and 46.2 kW | 23 % more or 13.8 kW |
Displacement | 4.5 l. and 3.6 l. | 20 % more or 0.9 l. |
Torque measured at | 1400 rev / min and 1300 rev / min | 7 % more or 100 rev |
Full power | 63 kW and 49.2 kW | 22 % more or 13.8 kW |
Maximum effective torque | 334 Nm and 211.5 Nm | 37 % more or 122.5 Nm |
Load-transfer device
Lifting capacity at full height | 2804 kg and 2400 kg | 14 % more or 404 kg |
Radius at max unloading height | 717 mm and 710 mm | 1 % more or 7 mm |
Digging depth | 199 mm and 100 mm | 50 % more or 99 mm |
Bucket breakout force | 40.8 kN and 3540 kN | 99 % less or 3499.2 kN |
Hydraulic system
Pump bandwidth | 108 l/min and 1.9 l/min | 98 % more or 106.1 l/min |
Gear box
Maximum forward speed | 39.5 km/h and 35.9 km/h | 9 % more or 3.6 km/h |
Maximum reverse gear | 47.8 km/h and 41.7 km/h | 13 % more or 6.1 km/h |
Backdigger
Load at maximum lifting in unfolded state | 367 kg and 1110 kg | 67 % less or 743 kg |
Loading height in unfolded state | 4040 mm and 3910 mm | 3 % more or 130 mm |
Load at maximum lifting in folded state | 885 kg and 1920 kg | 54 % less or 1035 kg |
Neutral reasons:
Sizes
Transport width | 2340 mm and 2180 mm |
Transport height | 3480 mm and 4170 mm |
Wheelbase | 2100 mm and 2150 mm |
Transport length | 7010 mm and 7070 mm |
Operation
Rear tyres size 2wd/4wd | 19.5L-24,10PR,R4 and 17.5Lx24/19.5Lx24 |
Operating voltage | 12 V and 12 V |
Front tyres size 2wd / 4wd | 11L-15,10PR,F3;12.00-16.5,8PR,R4 and 11Lx16.1/12x16.5 |
Motor
Manufacturer | John Deere and Case |
Model | 4-219D and Family III 445T/M2, 2 level |
Cylinders number | 4 and 4 |
Effective torque increase | 20 % and 33 % |
Aspiration | natural aspiration and turbocharging |
Load-transfer device
Shovel width | 2340 mm and 2.1 mm |
Hydraulic system
Type of pump | 8 radial piston pump, with locking in the intermediate position, with an adjustable flow rate at constant pressure and gear-type, actuated by transmission |
Overflow valve pressure | 17238 kPa and 0 kPa |
Gear box
Transmission type | Manual switching with the first and second speeds with the inclusion of the sliding holder gears and the third and fourth speeds with cone-type synchronizer gearing. and 4-speed synchronized mesh with power hydraulic clutches |
Forward gears number | 4 and 4 |
Reverse gears number | 4 and 4 |
Backdigger
Hinge joint radius in folded state | 5360 mm and 5440 mm |
Hinge joint radius in unfolded state | 6580 mm and 6650 mm |
Images
Sizes
1. Transport length | 7010 mm | 1. Transport length | 7070 mm |
2. Transport width | 2340 mm | 2. Transport width | 2180 mm |
3. Transport height | 3480 mm | 3. Transport height | 4170 mm |
4. Wheelbase | 2100 mm | 4. Wheelbase | 2150 mm |
5. Clearance | 305 mm | 5. Clearance | 376 mm |
Load-transfer device
7. Ground clearance at maximum unloading height | 2740 mm | 7. Ground clearance at maximum unloading height | 2640 mm |
8. Radius at max unloading height | 710 mm | 8. Radius at max unloading height | 717 mm |
9. Digging depth | 100 mm | 9. Digging depth | 199 mm |
Backdigger
10. Loading height in folded state | 3590 mm | 10. Loading height in folded state | 3400 mm |
11. Hinge joint radius in folded state | 5360 mm | 11. Hinge joint radius in folded state | 5440 mm |
12. Digging depth in folded state | 4420 mm | 12. Digging depth in folded state | 4340 mm |
13. Radius at high-altitude loading in folded state | 6530 mm | 13. Radius at high-altitude loading in folded state | 2670 mm |