vs.

      John Deere 410C vs. Case 580 Super N

      6 reasons to buy John Deere 410C:

      Sizes

      Clearance 305 mm and 304 mm 0 % more or 1 mm

      Operation

      Transmission fluid volume 80 l. and 20 l. 75 % more or 60 l.

      Backdigger

      Digging depth in folded state 4670 mm and 4410 mm 6 % more or 260 mm
      Digging depth in unfolded state 5610 mm and 5470 mm 2 % more or 140 mm
      Radius at high-altitude loading in folded state 6760 mm and 1410 mm 79 % more or 5350 mm
      Radius at high-altitude loading in unfolded state 7670 mm and 2200 mm 71 % more or 5470 mm

      15 reasons to buy Case 580 Super N:

      Operation

      Oil system fluid volume 13.6 l. and 8.5 l. 37 % more or 5.1 l.
      Cooling system fluid volume 18 l. and 16 l. 11 % more or 2 l.
      Fuel Capacity 159 l. and 87 l. 45 % more or 72 l.
      Hydraulic system fluid volume 119.2 l. and 80 l. 33 % more or 39.2 l.
      Turn radius 3352.8 mm and 3550 mm 6 % less or 197.2 mm
      Generator current strength 120 amperes and 65 amperes 46 % more or 55 amperes

      Motor

      Full power 72.3 kW and 59.7 kW 17 % more or 12.6 kW
      Effective power 68.6 kW and 55.9 kW 19 % more or 12.7 kW
      Torque measured at 1400 rev / min and 1200 rev / min 14 % more or 200 rev
      Maximum effective torque 444.7 Nm and 291.5 Nm 34 % more or 153.2 Nm

      Hydraulic system

      Pump bandwidth 151.4 l/min and 133 l/min 12 % more or 18.4 l/min

      Gear box

      Maximum forward speed 38.6 km/h and 35.6 km/h 8 % more or 3.0 km/h
      Maximum reverse gear 46.3 km/h and 41.2 km/h 11 % more or 5.1 km/h

      Backdigger

      Loading height in folded state 3670 mm and 3610 mm 2 % more or 60 mm
      Loading height in unfolded state 4380 mm and 4240 mm 3 % more or 140 mm

      Neutral reasons:

      Sizes

      Wheelbase 2100 mm and 2130 mm
      Transport length 7140 mm and 7140 mm
      Transport width 2340 mm and 2170 mm
      Transport height 3610 mm and 3290 mm
      Height to cab upper part 2640 mm and 2680 mm

      Operation

      Front tyres size 2wd / 4wd 11L-15,12PR F3;12.00-16.5,8PR and 11L x 16 / 12 x 16.5
      Rear tyres size 2wd/4wd 17.5-24 10PR R4;19.5L-24,10PR R4/21L-24,10PR R4 and 19.5L x 24
      Operating voltage 12 V and 12 V

      Motor

      Manufacturer John Deere and Case
      Model 4276D and 445TA/E3
      Displacement 4.5 l. and 4.5 l.
      Power measured at 2200 rev / min and 2200 rev / min
      Cylinders number 4 and 4
      Effective torque increase 20 % and 45 %
      Aspiration natural aspiration and turbocharging

      Load-transfer device

      Shovel width 2340 mm and 2082.8 mm

      Hydraulic system

      Overflow valve pressure 17238 kPa and 23786.9 kPa

      Gear box

      Transmission type Manual switching with the first and second speeds with the inclusion of the sliding holder gears and the third and fourth speeds with cone-type synchronizer gearing. and Servo drive with synchronizer
      Forward gears number 4 and 4
      Reverse gears number 4 and 4

      Backdigger

      Hinge joint radius in unfolded state 6530 mm and 6580 mm
      Hinge joint radius in folded state 5610 mm and 5550 mm

      Images

      Sizes

      1. Transport length 7140 mm 1. Transport length 7140 mm
      2. Transport width 2340 mm 2. Transport width 2170 mm
      3. Transport height 3610 mm 3. Transport height 3290 mm
      4. Wheelbase 2100 mm 4. Wheelbase 2130 mm
      5. Clearance 305 mm 5. Clearance 304 mm
      6. Height to cab upper part 2640 mm 6. Height to cab upper part 2680 mm

      Backdigger

      10. Loading height in folded state 3610 mm 10. Loading height in folded state 3670 mm
      11. Hinge joint radius in folded state 5610 mm 11. Hinge joint radius in folded state 5550 mm
      12. Digging depth in folded state 4670 mm 12. Digging depth in folded state 4410 mm
      13. Radius at high-altitude loading in folded state 6760 mm 13. Radius at high-altitude loading in folded state 1410 mm