vs.

      John Deere 710G vs. John Deere 315C

      23 reasons to buy John Deere 710G:

      Sizes

      Clearance 356 mm and 350 mm 2 % more or 6 mm

      Operation

      Maximum weight 10430 kg and 6281 kg 40 % more or 4149 kg
      Generator current strength 90 amperes and 65 amperes 28 % more or 25 amperes
      Fuel Capacity 261 l. and 98 l. 62 % more or 163 l.
      Hydraulic system fluid volume 159 l. and 79 l. 50 % more or 80 l.
      Oil system fluid volume 19 l. and 8.5 l. 55 % more or 10.5 l.
      Cooling system fluid volume 27 l. and 16 l. 41 % more or 11 l.
      Transmission fluid volume 15 l. and 7 l. 53 % more or 8 l.

      Motor

      Effective power 91 kW and 50 kW 45 % more or 41 kW
      Maximum effective torque 538.3 Nm and 260.3 Nm 52 % more or 278.0 Nm
      Torque measured at 1300 rev / min and 1200 rev / min 8 % more or 100 rev

      Load-transfer device

      Bucket breakout force 66 kN and 4241 kN 98 % less or 4175 kN
      Lifting capacity at full height 3943 kg and 2585 kg 34 % more or 1358 kg

      Hydraulic system

      Pump bandwidth 197 l/min and 133 l/min 32 % more or 64 l/min

      Backdigger

      Bucket digging force in unfolded state 7711.1 kg and 5200 kg 33 % more or 2511.1 kg
      Load at maximum lifting in unfolded state 1132 kg and 1680 kg 33 % less or 548 kg
      Loading height in folded state 4340 mm and 3510 mm 19 % more or 830 mm
      Loading height in unfolded state 4880 mm and 3580 mm 27 % more or 1300 mm
      Digging depth in folded state 5440 mm and 4290 mm 21 % more or 1150 mm
      Radius at high-altitude loading in folded state 8130 mm and 6590 mm 19 % more or 1540 mm
      Digging depth in unfolded state 6860 mm and 5130 mm 25 % more or 1730 mm
      Radius at high-altitude loading in unfolded state 9400 mm and 7700 mm 18 % more or 1700 mm
      Bucket digging force in folded state 7711.1 kg and 5260 kg 32 % more or 2451.1 kg

      9 reasons to buy John Deere 315C:

      Operation

      Turn radius 300 mm and 3230 mm 91 % less or 2930 mm
      Front axle fluid volume 23 l. and 10.6 l. 54 % more or 12.4 l.

      Motor

      Power measured at 2200 rev / min and 2000 rev / min 9 % more or 200 rev

      Load-transfer device

      Ground clearance at maximum unloading height 3510 mm and 2840 mm 19 % more or 670 mm
      Digging depth 5490 mm and 104 mm 98 % more or 5386 mm

      Gear box

      Reverse gears number 4 and 3 25 % more or 1
      Maximum forward speed 40.7 km/h and 37.1 km/h 9 % more or 3.6 km/h
      Maximum reverse gear 36.6 km/h and 25.9 km/h 29 % more or 10.7 km/h

      Backdigger

      Load at maximum lifting in folded state 1820 kg and 1985 kg 8 % less or 165 kg

      Neutral reasons:

      Sizes

      Transport length 8150 mm and 5510 mm
      Transport width 2410 mm and 2350 mm
      Transport height 4220 mm and 3760 mm
      Height to cab upper part 2970 mm and 2620 mm
      Wheelbase 2511 mm and 2100 mm

      Operation

      Front tyres size 2wd / 4wd 15-19.5SS-1 and 11L-16,8PRF3/10.5/-18,8PRTG2
      Rear tyres size 2wd/4wd 21L-28R4 and 16.9-28,10PR,R1/R4
      Operating voltage 12 V and 12 V

      Motor

      Model 6068T and 4039D
      Effective torque increase 33 % and 20 %
      Manufacturer John Deere and John Deere

      Load-transfer device

      Shovel width 914 mm and 2340 mm

      Hydraulic system

      Overflow valve pressure 25000 kPa and 18620 kPa
      Type of pump Axial-piston type, PCLS system and open center, gear type

      Gear box

      Forward gears number 4 and 4
      Transmission type 4-speed, helical gear, power shift transmission under full load with hydraulic reverser and 4-speed transmission with a helical gear with a clutch switch, synchronized on all transmissions with hydraulic reverser

      Backdigger

      Hinge joint radius in folded state 6860 mm and 5320 mm
      Hinge joint radius in unfolded state 8130 mm and 6410 mm

      Images

      Sizes

      1. Transport length 8150 mm 1. Transport length 5510 mm
      2. Transport width 2410 mm 2. Transport width 2350 mm
      3. Transport height 4220 mm 3. Transport height 3760 mm
      4. Wheelbase 2511 mm 4. Wheelbase 2100 mm
      5. Clearance 356 mm 5. Clearance 350 mm
      6. Height to cab upper part 2970 mm 6. Height to cab upper part 2620 mm

      Load-transfer device

      7. Ground clearance at maximum unloading height 2840 mm 7. Ground clearance at maximum unloading height 3510 mm
      9. Digging depth 104 mm 9. Digging depth 5490 mm

      Backdigger

      12. Digging depth in folded state 5440 mm 12. Digging depth in folded state 4290 mm
      13. Radius at high-altitude loading in folded state 8130 mm 13. Radius at high-altitude loading in folded state 6590 mm
      10. Loading height in folded state 4340 mm 10. Loading height in folded state 3510 mm
      11. Hinge joint radius in folded state 6860 mm 11. Hinge joint radius in folded state 5320 mm