- Home/
- Comparison/
- Loader-Digger/
- John Deere 710J vs. John Deere 710C
John Deere 710J vs. John Deere 710C
14 reasons to buy John Deere 710J:
Operation
| Fuel Capacity | 261 l. and 140 l. | 46 % more or 121 l. |
| Oil system fluid volume | 20 l. and 19 l. | 5 % more or 1 l. |
| Generator current strength | 90 amperes and 78 amperes | 13 % more or 12 amperes |
Motor
| Maximum effective torque | 537 Nm and 465 Nm | 13 % more or 72 Nm |
| Effective power | 92 kW and 85.8 kW | 7 % more or 6.2 kW |
| Displacement | 6.8 l. and 5.9 l. | 13 % more or 0.9 l. |
Load-transfer device
| Lifting capacity at full height | 4212 kg and 3230 kg | 23 % more or 982 kg |
| Digging depth | 104 mm and 100 mm | 4 % more or 4 mm |
Gear box
| Reverse gears number | 3 and 2 | 33 % more or 1 |
| Maximum forward speed | 39.6 km/h and 33.9 km/h | 14 % more or 5.7 km/h |
| Maximum reverse gear | 27.2 km/h and 10.6 km/h | 61 % more or 16.6 km/h |
Backdigger
| Loading height in unfolded state | 5180 mm and 4570 mm | 12 % more or 610 mm |
| Bucket digging force in folded state | 7711.1 kg and 4354.5 kg | 44 % more or 3356.6 kg |
| Loading height in folded state | 4340 mm and 4014.2 mm | 8 % more or 325.8 mm |
10 reasons to buy John Deere 710C:
Operation
| Transmission fluid volume | 23 l. and 15.1 l. | 34 % more or 7.9 l. |
| Rear axle fluid volume | 17 l. and 16 l. | 6 % more or 1 l. |
| Turn radius | 4370 mm and 4535 mm | 4 % less or 165 mm |
Motor
| Power measured at | 2200 rev / min and 2000 rev / min | 9 % more or 200 rev |
Load-transfer device
| Bucket volume | 1.3 m3 and 1.2 m3 | 8 % more or 0.1 m3 |
| Bucket breakout force | 60.3 kN and 69.1 kN | 13 % less or 8.8 kN |
| Radius at max unloading height | 737 mm and 690 mm | 6 % more or 47 mm |
Hydraulic system
| Pump bandwidth | 201 l/min and 197 l/min | 2 % more or 4 l/min |
Backdigger
| Digging depth in folded state | 5490 mm and 5440 mm | 1 % more or 50 mm |
| Digging depth in unfolded state | 6930 mm and 6810 mm | 2 % more or 120 mm |
Neutral reasons:
Sizes
| Clearance | 356 mm and 356 mm |
| Transport length | 8150 mm and 8129 mm |
| Transport width | 2410 mm and 2440 mm |
| Transport height | 4170 mm and 4014.2 mm |
| Height to cab upper part | 2971.8 mm and 2691.4 mm |
| Wheelbase | 2520 mm and 2400 mm |
Operation
| Front tyres size 2wd / 4wd | 14.5/75-16 10PR/15-19.5 8PR and 14.5/75-16.1,10PR F3 |
| Rear tyres size 2wd/4wd | 21L-28 14 PR and 21L-24,16PR R4/20.5-25,12PR R4 |
| Hydraulic system fluid volume | 151 l. and 151 l. |
| Operating voltage | 12 V and 12 V |
| Cooling system fluid volume | 26 l. and 26 l. |
Motor
| Effective torque increase | 41 % and 25 % |
| Manufacturer | John Deere and John Deere |
| Model | 6068T and 6059T |
Load-transfer device
| Shovel width | 2464 mm and 2440 mm |
| Ground clearance at maximum unloading height | 2920 mm and 2920 mm |
Hydraulic system
| Type of pump | Axial-piston pump and Radial pistons |
| Overflow valve pressure | 24993 kPa and 17500 kPa |
Gear box
| Forward gears number | 4 and 4 |
| Transmission type | powershift transmission and Powershift with a modular switching under full load between the front and rear transmission |
Backdigger
| Hinge joint radius in folded state | 6860 mm and 6900 mm |
| Hinge joint radius in unfolded state | 8190 mm and 4570 mm |
Images
Sizes
| 1. Transport length | 8150 mm | 1. Transport length | 8129 mm |
| 2. Transport width | 2410 mm | 2. Transport width | 2440 mm |
| 3. Transport height | 4170 mm | 3. Transport height | 4014.2 mm |
| 4. Wheelbase | 2520 mm | 4. Wheelbase | 2400 mm |
| 5. Clearance | 356 mm | 5. Clearance | 356 mm |
| 6. Height to cab upper part | 2971.8 mm | 6. Height to cab upper part | 2691.4 mm |
Load-transfer device
| 9. Digging depth | 104 mm | 9. Digging depth | 100 mm |
| 7. Ground clearance at maximum unloading height | 2920 mm | 7. Ground clearance at maximum unloading height | 2920 mm |
| 8. Radius at max unloading height | 690 mm | 8. Radius at max unloading height | 737 mm |
Backdigger
| 10. Loading height in folded state | 4340 mm | 10. Loading height in folded state | 4014.2 mm |
| 11. Hinge joint radius in folded state | 6860 mm | 11. Hinge joint radius in folded state | 6900 mm |
| 12. Digging depth in folded state | 5440 mm | 12. Digging depth in folded state | 5490 mm |