- Home/
- Comparison/
- Medium-Sized Excavator/
- Case 9007B vs. Daewoo S75V
Case 9007B vs. Daewoo S75V
15 reasons to buy Case 9007B:
Swing device
Rotation speed | 13.5 rev / min and 9.6 rev / min | 29 % more or 3.9 rev |
Operation
Fuel Capacity | 140.1 l. and 110 l. | 21 % more or 30.1 l. |
Engine oil volume | 10 l. and 9.7 l. | 3 % more or 0.3 l. |
Motor
Effective power | 40.3 kW and 39 kW | 3 % more or 1.3 kW |
Power measured at | 2100 rev / min and 1900 rev / min | 10 % more or 200 rev |
Torque measured at | 1600 rev / min and 1425 rev / min | 11 % more or 175 rev |
Carrier
Track shoes number per side | 42 and 38 | 10 % more or 4 |
Specific ground pressure | 33.8 kPa and 37.2 kPa | 9 % less or 3.4 kPa |
Maximum travel speed | 5 km/h and 4.7 km/h | 6 % more or 0.3 km/h |
Booms/sections features 2
Maximum excavation depth | 4580 mm and 4420 mm | 3 % more or 160 mm |
Maximum loading height | 5560 mm and 4525 mm | 19 % more or 1035 mm |
Maximum vertical wall digging depth | 4060 mm and 3345 mm | 18 % more or 715 mm |
Booms/sections features 1
Maximum excavation depth | 4150 mm and 4020 mm | 3 % more or 130 mm |
Maximum loading height | 5150 mm and 4290 mm | 17 % more or 860 mm |
Maximum vertical wall digging depth | 3490 mm and 2910 mm | 17 % more or 580 mm |
10 reasons to buy Daewoo S75V:
Sizes
Width to outside of caterpillar track | 2200 mm and 2150 mm | 2 % more or 50 mm |
Clearance | 365 mm and 360 mm | 1 % more or 5 mm |
Counterweight ground clearance | 785 mm and 760 mm | 3 % more or 25 mm |
Operation
Hydraulic system overflow valve pressure | 27441.1 kPa and 210.7 kPa | 99 % more or 27230.4 kPa |
Hydraulic pump flow rate | 135 l/min and 151.4 l/min | 11 % less or 16.4 l/min |
Hydraulic system fluid volume | 150 l. and 95 l. | 37 % more or 55 l. |
Motor
Displacement | 3.3 l. and 2.8 l. | 15 % more or 0.5 l. |
Maximum torque | 235 Nm and 188.5 Nm | 20 % more or 46.5 Nm |
Booms/sections features 2
Maximum radius along ground level | 6880 mm and 6680 mm | 3 % more or 200 mm |
Booms/sections features 1
Maximum radius along ground level | 6495 mm and 6220 mm | 4 % more or 275 mm |
Neutral reasons:
Sizes
Height to cab upper part | 2640 mm and 2630 mm |
Rear platform swing radius | 1750 mm and 1700 mm |
Caterpillar track length on ground level | 2050 mm and 2130 mm |
Operation
Working weight | 6900 kg and 8000 kg |
Cooling system fluid volume | 10 l. and 10 l. |
Operating voltage | 24 V and 12 V |
Motor
Manufacturer | Isuzu and Yanmar |
Model | 4JB1 and 4TNV98-XDB |
Cylinders number | 4 and 4 |
Carrier
Shoe dimensions | 449.6 mm and 450 mm |
Support rollers number on either side | 1 and 1 |
Rolling bearings number on either side | 5 and 5 |
Booms/sections features 2
Unit load-transfer height | 2930 mm and 3215 mm |
Maximum cut height | 7660 mm and 6490 mm |
Booms/sections features 1
Maximum cut height | 7230 mm and 6250 mm |
Unit load-transfer height | 2640 mm and 2420 mm |
Unit load-transfer length | 6020 mm and 6280 mm |
Images
Sizes
2. Width to outside of caterpillar track | 2150 mm | 2. Width to outside of caterpillar track | 2200 mm |
4. Caterpillar track length on ground level | 2050 mm | 4. Caterpillar track length on ground level | 2130 mm |
5. Clearance | 360 mm | 5. Clearance | 365 mm |
7. Height to cab upper part | 2640 mm | 7. Height to cab upper part | 2630 mm |
8. Rear platform swing radius | 1750 mm | 8. Rear platform swing radius | 1700 mm |
15. Counterweight ground clearance | 760 mm | 15. Counterweight ground clearance | 785 mm |
Carrier
14. Shoe dimensions | 449.6 mm | 14. Shoe dimensions | 450 mm |
Booms/sections features 1
13. Maximum excavation depth | 4580 mm | 13. Maximum excavation depth | 4420 mm |
3. Unit load-transfer height | 2930 mm | 3. Unit load-transfer height | 2420 mm |
9. Maximum cut height | 7660 mm | 9. Maximum cut height | 6250 mm |
10. Maximum loading height | 5560 mm | 10. Maximum loading height | 4290 mm |
1. Unit load-transfer length | 6160 mm | 1. Unit load-transfer length | 6280 mm |
11. Maximum radius along ground level | 6680 mm | 11. Maximum radius along ground level | 6495 mm |
12. Maximum vertical wall digging depth | 4060 mm | 12. Maximum vertical wall digging depth | 2910 mm |