- Home/
- Comparison/
- Medium-Sized Excavator/
- Case CX75 vs. John Deere 80C
Case CX75 vs. John Deere 80C
12 reasons to buy Case CX75:
Operation
Cooling system fluid volume | 10.2 l. and 5.8 l. | 43 % more or 4.4 l. |
Generator current strength | 50 amperes and 30 amperes | 40 % more or 20 amperes |
Hydraulic pump flow rate | 68 l/min and 126 l/min | 46 % less or 58 l/min |
Motor
Effective power | 40 kW and 38.8 kW | 3 % more or 1.2 kW |
Maximum torque | 210.2 Nm and 192.5 Nm | 8 % more or 17.7 Nm |
Carrier
Track shoes number per side | 39 and 38 | 3 % more or 1 |
Maximum travel speed | 5.1 km/h and 5 km/h | 2 % more or 0.1 km/h |
Booms/sections features 2
Maximum radius along ground level | 6770 mm and 6600 mm | 3 % more or 170 mm |
Maximum loading height | 5540 mm and 5530 mm | 0 % more or 10 mm |
Booms/sections features 1
Maximum excavation depth | 4140 mm and 4090 mm | 1 % more or 50 mm |
Maximum radius along ground level | 6390 mm and 6100 mm | 5 % more or 290 mm |
Maximum loading height | 5250 mm and 5130 mm | 2 % more or 120 mm |
15 reasons to buy John Deere 80C:
Swing device
Rotation speed | 11.3 rev / min and 9.5 rev / min | 16 % more or 1.8 rev |
Sizes
Width to outside of caterpillar track | 2350 mm and 2320 mm | 1 % more or 30 mm |
Counterweight ground clearance | 760 mm and 750 mm | 1 % more or 10 mm |
Operation
Fuel Capacity | 136 l. and 100 l. | 26 % more or 36 l. |
Hydraulic system fluid volume | 100 l. and 97 l. | 3 % more or 3 l. |
Engine oil volume | 9.9 l. and 9 l. | 9 % more or 0.9 l. |
Hydraulic system overflow valve pressure | 31371.1 kPa and 204.2 kPa | 99 % more or 31166.9 kPa |
Motor
Power measured at | 2100 rev / min and 2000 rev / min | 5 % more or 100 rev |
Displacement | 3.1 l. and 2.2 l. | 29 % more or 0.9 l. |
Torque measured at | 1700 rev / min and 1500 rev / min | 12 % more or 200 rev |
Carrier
Hook traction force | 54.9 kN and 59 kN | 7 % less or 4.1 kN |
Specific ground pressure | 25 kPa and 35.2 kPa | 29 % less or 10.2 kPa |
Booms/sections features 2
Maximum excavation depth | 4600 mm and 4540 mm | 1 % more or 60 mm |
Maximum vertical wall digging depth | 4280 mm and 4100 mm | 4 % more or 180 mm |
Booms/sections features 1
Maximum vertical wall digging depth | 3730 mm and 3640 mm | 2 % more or 90 mm |
Neutral reasons:
Sizes
Height to cab upper part | 2700 mm and 2600 mm |
Clearance | 360 mm and 360 mm |
Rear platform swing radius | 1240 mm and 1750 mm |
Caterpillar track length on ground level | 2210 mm and 2140 mm |
Operation
Operating voltage | 12 V and 24 V |
Working weight | 7919 kg and 7215 kg |
Motor
Manufacturer | Isuzu and Isuzu |
Model | AU-4LE2X and CC-4JG1 |
Cylinders number | 4 and 4 |
Aspiration | turbocharging and natural aspiration |
Carrier
Shoe dimensions | 450 mm and 600 mm |
Support rollers number on either side | 1 and 1 |
Rolling bearings number on either side | 5 and 5 |
Booms/sections features 2
Unit load-transfer height | 2950 mm and 2880 mm |
Unit load-transfer length | 5910 mm and 6120 mm |
Maximum cut height | 7620 mm and 7490 mm |
Booms/sections features 1
Unit load-transfer height | 2700 mm and 2600 mm |
Unit load-transfer length | 5920 mm and 6080 mm |
Maximum cut height | 7330 mm and 7090 mm |
Images
Sizes
2. Width to outside of caterpillar track | 2320 mm | 2. Width to outside of caterpillar track | 2350 mm |
4. Caterpillar track length on ground level | 2210 mm | 4. Caterpillar track length on ground level | 2140 mm |
5. Clearance | 360 mm | 5. Clearance | 360 mm |
7. Height to cab upper part | 2700 mm | 7. Height to cab upper part | 2600 mm |
8. Rear platform swing radius | 1240 mm | 8. Rear platform swing radius | 1750 mm |
15. Counterweight ground clearance | 750 mm | 15. Counterweight ground clearance | 760 mm |
Carrier
14. Shoe dimensions | 450 mm | 14. Shoe dimensions | 600 mm |
Booms/sections features 1
13. Maximum excavation depth | 4540 mm | 13. Maximum excavation depth | 4600 mm |
1. Unit load-transfer length | 5970 mm | 1. Unit load-transfer length | 6120 mm |
3. Unit load-transfer height | 2970 mm | 3. Unit load-transfer height | 2880 mm |
9. Maximum cut height | 7200 mm | 9. Maximum cut height | 7490 mm |
10. Maximum loading height | 5150 mm | 10. Maximum loading height | 5530 mm |
11. Maximum radius along ground level | 6360 mm | 11. Maximum radius along ground level | 6600 mm |
12. Maximum vertical wall digging depth | 3260 mm | 12. Maximum vertical wall digging depth | 4280 mm |