- Home/
- Comparison/
- Medium-Sized Excavator/
- Hitachi ZX70 vs. Case CX75
Hitachi ZX70 vs. Case CX75
14 reasons to buy Hitachi ZX70:
Swing device
Rotation speed | 11.3 rev / min and 9.5 rev / min | 16 % more or 1.8 rev |
Sizes
Counterweight ground clearance | 760 mm and 750 mm | 1 % more or 10 mm |
Operation
Fuel Capacity | 135 l. and 100 l. | 26 % more or 35 l. |
Hydraulic system fluid volume | 100 l. and 97 l. | 3 % more or 3 l. |
Engine oil volume | 12 l. and 9 l. | 25 % more or 3 l. |
Hydraulic system overflow valve pressure | 31400 kPa and 204.2 kPa | 99 % more or 31195.8 kPa |
Motor
Power measured at | 2100 rev / min and 2000 rev / min | 5 % more or 100 rev |
Displacement | 3.1 l. and 2.2 l. | 29 % more or 0.9 l. |
Torque measured at | 1800 rev / min and 1500 rev / min | 17 % more or 300 rev |
Carrier
Specific ground pressure | 32 kPa and 35.2 kPa | 9 % less or 3.2 kPa |
Booms/sections features 2
Maximum vertical wall digging depth | 4280 mm and 4100 mm | 4 % more or 180 mm |
Maximum excavation depth | 4670 mm and 4540 mm | 3 % more or 130 mm |
Booms/sections features 1
Maximum vertical wall digging depth | 3730 mm and 3640 mm | 2 % more or 90 mm |
Maximum excavation depth | 4170 mm and 4140 mm | 1 % more or 30 mm |
11 reasons to buy Case CX75:
Sizes
Width to outside of caterpillar track | 2320 mm and 2200 mm | 5 % more or 120 mm |
Operation
Hydraulic pump flow rate | 68 l/min and 178.5 l/min | 62 % less or 110.5 l/min |
Cooling system fluid volume | 10.2 l. and 9.5 l. | 7 % more or 0.7 l. |
Motor
Effective power | 40 kW and 39 kW | 2 % more or 1 kW |
Maximum torque | 210.2 Nm and 192 Nm | 9 % more or 18.2 Nm |
Carrier
Maximum travel speed | 5.1 km/h and 5 km/h | 2 % more or 0.1 km/h |
Track shoes number per side | 39 and 38 | 3 % more or 1 |
Booms/sections features 2
Maximum loading height | 5540 mm and 5450 mm | 2 % more or 90 mm |
Maximum radius along ground level | 6770 mm and 6670 mm | 1 % more or 100 mm |
Booms/sections features 1
Maximum radius along ground level | 6390 mm and 6170 mm | 3 % more or 220 mm |
Maximum loading height | 5250 mm and 5060 mm | 4 % more or 190 mm |
Neutral reasons:
Sizes
Height to cab upper part | 2600 mm and 2700 mm |
Clearance | 360 mm and 360 mm |
Rear platform swing radius | 1750 mm and 1240 mm |
Caterpillar track length on ground level | 2140 mm and 2210 mm |
Operation
Working weight | 6920 kg and 7919 kg |
Operating voltage | 24 V and 12 V |
Motor
Manufacturer | Isuzu and Isuzu |
Model | CC-4JG1 and AU-4LE2X |
Cylinders number | 4 and 4 |
Carrier
Shoe dimensions | 450 mm and 450 mm |
Support rollers number on either side | 1 and 1 |
Rolling bearings number on either side | 5 and 5 |
Booms/sections features 2
Unit load-transfer height | 2880 mm and 2950 mm |
Unit load-transfer length | 6120 mm and 5910 mm |
Maximum cut height | 7550 mm and 7620 mm |
Booms/sections features 1
Unit load-transfer height | 2550 mm and 2700 mm |
Unit load-transfer length | 6080 mm and 5920 mm |
Maximum cut height | 7150 mm and 7330 mm |
Images
Sizes
2. Width to outside of caterpillar track | 2200 mm | 2. Width to outside of caterpillar track | 2320 mm |
4. Caterpillar track length on ground level | 2140 mm | 4. Caterpillar track length on ground level | 2210 mm |
5. Clearance | 360 mm | 5. Clearance | 360 mm |
7. Height to cab upper part | 2600 mm | 7. Height to cab upper part | 2700 mm |
8. Rear platform swing radius | 1750 mm | 8. Rear platform swing radius | 1240 mm |
15. Counterweight ground clearance | 760 mm | 15. Counterweight ground clearance | 750 mm |
Carrier
14. Shoe dimensions | 450 mm | 14. Shoe dimensions | 450 mm |
Booms/sections features 1
11. Maximum radius along ground level | 6670 mm | 11. Maximum radius along ground level | 6770 mm |
12. Maximum vertical wall digging depth | 4280 mm | 12. Maximum vertical wall digging depth | 4100 mm |
13. Maximum excavation depth | 4170 mm | 13. Maximum excavation depth | 4540 mm |
1. Unit load-transfer length | 6120 mm | 1. Unit load-transfer length | 5970 mm |
3. Unit load-transfer height | 2880 mm | 3. Unit load-transfer height | 2970 mm |
9. Maximum cut height | 7550 mm | 9. Maximum cut height | 7200 mm |
10. Maximum loading height | 5450 mm | 10. Maximum loading height | 5150 mm |