Hitachi ZX70 vs. John Deere 80C

9 reasons to buy Hitachi ZX70:

Operation

Hydraulic system overflow valve pressure	31400 kPa and 31371.1 kPa	0 % more or 28.9 kPa
Cooling system fluid volume	9.5 l. and 5.8 l.	39 % more or 3.7 l.
Engine oil volume	12 l. and 9.9 l.	17 % more or 2.1 l.

Motor

Torque measured at	1800 rev / min and 1700 rev / min	6 % more or 100 rev
Effective power	39 kW and 38.8 kW	1 % more or 0.2 kW

Booms/sections features 2

Maximum excavation depth	4670 mm and 4600 mm	1 % more or 70 mm
Maximum radius along ground level	6670 mm and 6600 mm	1 % more or 70 mm

Booms/sections features 1

Maximum excavation depth	4170 mm and 4090 mm	2 % more or 80 mm
Maximum radius along ground level	6170 mm and 6100 mm	1 % more or 70 mm

7 reasons to buy John Deere 80C:

Sizes

Width to outside of caterpillar track

2350 mm and 2200 mm

6 % more or 150 mm

Operation

Hydraulic pump flow rate	126 l/min and 178.5 l/min	29 % less or 52.5 l/min
Fuel Capacity	136 l. and 135 l.	1 % more or 1 l.

Motor

Maximum torque

192.5 Nm and 192 Nm

0 % more or 0.5 Nm

Carrier

Specific ground pressure

25 kPa and 32 kPa

22 % less or 7 kPa

Booms/sections features 2

Maximum loading height

5530 mm and 5450 mm

1 % more or 80 mm

Booms/sections features 1

Maximum loading height

5130 mm and 5060 mm

1 % more or 70 mm

Neutral reasons:

Swing device

Rotation speed

11.3 rev / min and 11.3 rev / min

Sizes

Rear platform swing radius	1750 mm and 1750 mm
Caterpillar track length on ground level	2140 mm and 2140 mm
Height to cab upper part	2600 mm and 2600 mm
Clearance	360 mm and 360 mm
Counterweight ground clearance	760 mm and 760 mm

Operation

Operating voltage	24 V and 24 V
Working weight	6920 kg and 7215 kg
Hydraulic system fluid volume	100 l. and 100 l.

Motor

Manufacturer	Isuzu and Isuzu
Cylinders number	4 and 4
Model	CC-4JG1 and CC-4JG1
Power measured at	2100 rev / min and 2100 rev / min
Displacement	3.1 l. and 3.1 l.

Carrier

Rolling bearings number on either side	5 and 5
Maximum travel speed	5 km/h and 5 km/h
Track width	1750 mm and 1750 mm
Track shoes number per side	38 and 38
Shoe dimensions	450 mm and 600 mm
Support rollers number on either side	1 and 1

Booms/sections features 2

Maximum cut height	7550 mm and 7490 mm
Maximum vertical wall digging depth	4280 mm and 4280 mm
Unit load-transfer height	2880 mm and 2880 mm
Unit load-transfer length	6120 mm and 6120 mm

Booms/sections features 1

Unit load-transfer height	2550 mm and 2600 mm
Unit load-transfer length	6080 mm and 6080 mm
Maximum cut height	7150 mm and 7090 mm
Maximum vertical wall digging depth	3730 mm and 3730 mm

Images

Sizes

2. Width to outside of caterpillar track	2200 mm	2. Width to outside of caterpillar track	2350 mm
4. Caterpillar track length on ground level	2140 mm	4. Caterpillar track length on ground level	2140 mm
5. Clearance	360 mm	5. Clearance	360 mm
7. Height to cab upper part	2600 mm	7. Height to cab upper part	2600 mm
8. Rear platform swing radius	1750 mm	8. Rear platform swing radius	1750 mm
15. Counterweight ground clearance	760 mm	15. Counterweight ground clearance	760 mm

Carrier

6. Track width	1750 mm	6. Track width	1750 mm
14. Shoe dimensions	450 mm	14. Shoe dimensions	600 mm

Booms/sections features 1

10. Maximum loading height	5060 mm	10. Maximum loading height	5530 mm
11. Maximum radius along ground level	6170 mm	11. Maximum radius along ground level	6600 mm
12. Maximum vertical wall digging depth	3730 mm	12. Maximum vertical wall digging depth	4280 mm
13. Maximum excavation depth	4170 mm	13. Maximum excavation depth	4600 mm
1. Unit load-transfer length	6120 mm	1. Unit load-transfer length	6120 mm
3. Unit load-transfer height	2880 mm	3. Unit load-transfer height	2880 mm
9. Maximum cut height	7550 mm	9. Maximum cut height	7490 mm