vs.

      John Deere 75D vs. Gehl 603

      15 reasons to buy John Deere 75D:

      Swing device

      Rotation speed 10.5 rev / min and 9 rev / min 14 % more or 1.5 rev

      Sizes

      Clearance 360 mm and 290 mm 19 % more or 70 mm

      Operation

      Hydraulic system overflow valve pressure 31398.7 kPa and 24497.1 kPa 22 % more or 6901.6 kPa
      Fuel Capacity 135 l. and 83 l. 39 % more or 52 l.
      Hydraulic system fluid volume 100 l. and 80 l. 20 % more or 20 l.

      Carrier

      Specific ground pressure 25.5 kPa and 32.4 kPa 21 % less or 6.9 kPa
      Maximum travel speed 5 km/h and 4.7 km/h 6 % more or 0.3 km/h

      Booms/sections features 2

      Maximum vertical wall digging depth 4220 mm and 3135 mm 26 % more or 1085 mm
      Maximum excavation depth 4610 mm and 4140 mm 10 % more or 470 mm
      Maximum radius along ground level 6760 mm and 6210 mm 8 % more or 550 mm
      Maximum loading height 5510 mm and 3995 mm 27 % more or 1515 mm

      Booms/sections features 1

      Maximum excavation depth 4110 mm and 3845 mm 6 % more or 265 mm
      Maximum radius along ground level 6260 mm and 6030 mm 4 % more or 230 mm
      Maximum loading height 5120 mm and 3720 mm 27 % more or 1400 mm
      Maximum vertical wall digging depth 3670 mm and 2855 mm 22 % more or 815 mm

      5 reasons to buy Gehl 603:

      Operation

      Generator current strength 88 amperes and 50 amperes 43 % more or 38 amperes
      Hydraulic pump flow rate 186.2 l/min and 220 l/min 15 % less or 33.8 l/min

      Motor

      Effective power 42.5 kW and 40.3 kW 5 % more or 2.2 kW
      Power measured at 2100 rev / min and 2000 rev / min 5 % more or 100 rev
      Displacement 3.3 l. and 2.2 l. 33 % more or 1.1 l.

      Neutral reasons:

      Sizes

      Height to cab upper part 2690 mm and 2570 mm
      Rear platform swing radius 1290 mm and 990 mm
      Caterpillar track length on ground level 2290 mm and 2000 mm

      Operation

      Operating voltage 24 V and 12 V
      Working weight 8048 kg and 5699.8 kg

      Motor

      Manufacturer Isuzu and EP
      Model 4LE2X, III Level III certified and Yanmar 4TNV98-VNS, A 2 level
      Cylinders number 4 and 4

      Carrier

      Rolling bearings number on either side 5 and 5
      Shoe dimensions 600 mm and 400 mm

      Booms/sections features 2

      Maximum cut height 7610 mm and 5850 mm

      Booms/sections features 1

      Unit load-transfer length 6300 mm and 5800 mm
      Maximum cut height 7210 mm and 5660 mm

      Images

      Sizes

      5. Clearance 360 mm 5. Clearance 290 mm
      7. Height to cab upper part 2690 mm 7. Height to cab upper part 2570 mm
      8. Rear platform swing radius 1290 mm 8. Rear platform swing radius 990 mm
      4. Caterpillar track length on ground level 2290 mm 4. Caterpillar track length on ground level 2000 mm

      Carrier

      14. Shoe dimensions 600 mm 14. Shoe dimensions 400 mm

      Booms/sections features 1

      1. Unit load-transfer length 6370 mm 1. Unit load-transfer length 5800 mm
      9. Maximum cut height 7610 mm 9. Maximum cut height 5850 mm
      10. Maximum loading height 5510 mm 10. Maximum loading height 3995 mm
      11. Maximum radius along ground level 6760 mm 11. Maximum radius along ground level 6210 mm
      12. Maximum vertical wall digging depth 4220 mm 12. Maximum vertical wall digging depth 3135 mm
      13. Maximum excavation depth 4610 mm 13. Maximum excavation depth 4140 mm