vs.

      Link-Belt 75 Spin Ace vs. Hitachi EX60LC-5

      13 reasons to buy Link-Belt 75 Spin Ace:

      Operation

      Hydraulic system fluid volume 95 l. and 90 l. 5 % more or 5 l.
      Generator current strength 50 amperes and 25 amperes 50 % more or 25 amperes
      Hydraulic pump flow rate 143.1 l/min and 158.4 l/min 10 % less or 15.3 l/min
      Fuel Capacity 100 l. and 35.7 l. 64 % more or 64.3 l.

      Motor

      Displacement 3.1 l. and 3 l. 3 % more or 0.1 l.
      Torque measured at 1800 rev / min and 1500 rev / min 17 % more or 300 rev
      Maximum torque 184.4 Nm and 181 Nm 2 % more or 3.4 Nm

      Booms/sections features 2

      Maximum radius along ground level 6770 mm and 6660 mm 2 % more or 110 mm
      Maximum loading height 5540 mm and 5470 mm 1 % more or 70 mm
      Maximum vertical wall digging depth 4100 mm and 4060 mm 1 % more or 40 mm

      Booms/sections features 1

      Maximum vertical wall digging depth 3640 mm and 3520 mm 3 % more or 120 mm
      Maximum radius along ground level 6390 mm and 6160 mm 4 % more or 230 mm
      Maximum loading height 5250 mm and 5070 mm 3 % more or 180 mm

      11 reasons to buy Hitachi EX60LC-5:

      Swing device

      Rotation speed 14.5 rev / min and 10 rev / min 31 % more or 4.5 rev

      Sizes

      Clearance 360 mm and 356 mm 1 % more or 4 mm
      Width to outside of caterpillar track 2350 mm and 2320 mm 1 % more or 30 mm

      Operation

      Cooling system fluid volume 10 l. and 9.6 l. 4 % more or 0.4 l.
      Engine oil volume 12.5 l. and 9.6 l. 23 % more or 2.9 l.
      Hydraulic system overflow valve pressure 31371.1 kPa and 29371.6 kPa 6 % more or 1999.5 kPa

      Motor

      Effective power 40.3 kW and 38.8 kW 4 % more or 1.5 kW
      Power measured at 2200 rev / min and 2100 rev / min 5 % more or 100 rev

      Carrier

      Specific ground pressure 27.5 kPa and 34 kPa 19 % less or 6.5 kPa

      Booms/sections features 2

      Maximum excavation depth 4660 mm and 4540 mm 3 % more or 120 mm

      Booms/sections features 1

      Maximum excavation depth 4150 mm and 4140 mm 0 % more or 10 mm

      Neutral reasons:

      Sizes

      Height to cab upper part 2700 mm and 2570 mm
      Rear platform swing radius 1210 mm and 1750 mm
      Caterpillar track length on ground level 2210 mm and 2290 mm

      Operation

      Operating voltage 12 V and 12 V
      Working weight 7665.7 kg and 6390 kg

      Motor

      Aspiration natural aspiration and natural aspiration
      Manufacturer Isuzu and Nissan
      Model CC-4JG1 and A-BD30

      Carrier

      Track shoes number per side 39 and 39
      Shoe dimensions 450 mm and 450 mm
      Support rollers number on either side 1 and 1
      Rolling bearings number on either side 5 and 5
      Maximum travel speed 4.8 km/h and 4.8 km/h
      Track width 1870 mm and 1850 mm

      Booms/sections features 2

      Unit load-transfer height 2950 mm and 2880 mm
      Unit load-transfer length 5910 mm and 6120 mm
      Maximum cut height 7620 mm and 7550 mm

      Booms/sections features 1

      Maximum cut height 7330 mm and 7150 mm
      Unit load-transfer height 2700 mm and 2570 mm
      Unit load-transfer length 5920 mm and 6080 mm

      Images

      Sizes

      2. Width to outside of caterpillar track 2320 mm 2. Width to outside of caterpillar track 2350 mm
      4. Caterpillar track length on ground level 2210 mm 4. Caterpillar track length on ground level 2290 mm
      5. Clearance 356 mm 5. Clearance 360 mm
      7. Height to cab upper part 2700 mm 7. Height to cab upper part 2570 mm
      8. Rear platform swing radius 1210 mm 8. Rear platform swing radius 1750 mm

      Carrier

      6. Track width 1870 mm 6. Track width 1850 mm
      14. Shoe dimensions 450 mm 14. Shoe dimensions 450 mm

      Booms/sections features 1

      11. Maximum radius along ground level 6770 mm 11. Maximum radius along ground level 6660 mm
      13. Maximum excavation depth 4140 mm 13. Maximum excavation depth 4660 mm
      12. Maximum vertical wall digging depth 4100 mm 12. Maximum vertical wall digging depth 4060 mm
      1. Unit load-transfer length 5910 mm 1. Unit load-transfer length 6080 mm
      3. Unit load-transfer height 2950 mm 3. Unit load-transfer height 2570 mm
      9. Maximum cut height 7620 mm 9. Maximum cut height 7150 mm
      10. Maximum loading height 5540 mm 10. Maximum loading height 5070 mm