- Home/
- Comparison/
- Medium-Sized Excavator/
- Link-Belt 75 Spin Ace vs. JCB 8060
Link-Belt 75 Spin Ace vs. JCB 8060
16 reasons to buy Link-Belt 75 Spin Ace:
Swing device
Rotation speed | 10 rev / min and 9.4 rev / min | 6 % more or 0.6 rev |
Sizes
Width to outside of caterpillar track | 2320 mm and 2000 mm | 14 % more or 320 mm |
Operation
Fuel Capacity | 100 l. and 70 l. | 30 % more or 30 l. |
Hydraulic system fluid volume | 95 l. and 67 l. | 29 % more or 28 l. |
Hydraulic system overflow valve pressure | 29371.6 kPa and 22994 kPa | 22 % more or 6377.6 kPa |
Hydraulic pump flow rate | 143.1 l/min and 150 l/min | 5 % less or 6.9 l/min |
Carrier
Specific ground pressure | 34 kPa and 36.3 kPa | 6 % less or 2.3 kPa |
Maximum travel speed | 4.8 km/h and 4.4 km/h | 8 % more or 0.4 km/h |
Booms/sections features 2
Maximum loading height | 5540 mm and 3988 mm | 28 % more or 1552 mm |
Maximum vertical wall digging depth | 4100 mm and 2486 mm | 39 % more or 1614 mm |
Maximum excavation depth | 4540 mm and 4133 mm | 9 % more or 407 mm |
Maximum radius along ground level | 6770 mm and 6182 mm | 9 % more or 588 mm |
Booms/sections features 1
Maximum excavation depth | 4140 mm and 3733 mm | 10 % more or 407 mm |
Maximum radius along ground level | 6390 mm and 5790 mm | 9 % more or 600 mm |
Maximum loading height | 5250 mm and 3750 mm | 29 % more or 1500 mm |
Maximum vertical wall digging depth | 3640 mm and 2132 mm | 41 % more or 1508 mm |
5 reasons to buy JCB 8060:
Operation
Cooling system fluid volume | 11 l. and 9.6 l. | 13 % more or 1.4 l. |
Generator current strength | 55 amperes and 50 amperes | 9 % more or 5 amperes |
Motor
Effective power | 43 kW and 38.8 kW | 10 % more or 4.2 kW |
Power measured at | 2300 rev / min and 2100 rev / min | 9 % more or 200 rev |
Maximum torque | 192 Nm and 184.4 Nm | 4 % more or 7.6 Nm |
Neutral reasons:
Sizes
Height to cab upper part | 2700 mm and 2662 mm |
Rear platform swing radius | 1210 mm and 1300 mm |
Caterpillar track length on ground level | 2210 mm and 1991 mm |
Operation
Engine oil volume | 9.6 l. and 9.6 l. |
Operating voltage | 12 V and 12 V |
Working weight | 7665.7 kg and 5991 kg |
Motor
Displacement | 3.1 l. and 3.1 l. |
Torque measured at | 1800 rev / min and 1800 rev / min |
Manufacturer | Isuzu and Isuzu |
Model | CC-4JG1 and 4JGI |
Carrier
Shoe dimensions | 450 mm and 400 mm |
Track width | 1870 mm and 1800 mm |
Rolling bearings number on either side | 5 and 5 |
Booms/sections features 2
Maximum cut height | 7620 mm and 5679 mm |
Unit load-transfer height | 2950 mm and 2662 mm |
Unit load-transfer length | 5910 mm and 4808 mm |
Booms/sections features 1
Unit load-transfer height | 2700 mm and 2662 mm |
Unit load-transfer length | 5920 mm and 4808 mm |
Maximum cut height | 7330 mm and 5437 mm |
Images
Sizes
7. Height to cab upper part | 2700 mm | 7. Height to cab upper part | 2662 mm |
8. Rear platform swing radius | 1210 mm | 8. Rear platform swing radius | 1300 mm |
2. Width to outside of caterpillar track | 2320 mm | 2. Width to outside of caterpillar track | 2000 mm |
4. Caterpillar track length on ground level | 2210 mm | 4. Caterpillar track length on ground level | 1991 mm |
Carrier
6. Track width | 1870 mm | 6. Track width | 1800 mm |
14. Shoe dimensions | 450 mm | 14. Shoe dimensions | 400 mm |
Booms/sections features 1
9. Maximum cut height | 7620 mm | 9. Maximum cut height | 5437 mm |
13. Maximum excavation depth | 4540 mm | 13. Maximum excavation depth | 4133 mm |
10. Maximum loading height | 5540 mm | 10. Maximum loading height | 3750 mm |
1. Unit load-transfer length | 5970 mm | 1. Unit load-transfer length | 4808 mm |
3. Unit load-transfer height | 2970 mm | 3. Unit load-transfer height | 2662 mm |
11. Maximum radius along ground level | 6770 mm | 11. Maximum radius along ground level | 5790 mm |
12. Maximum vertical wall digging depth | 4100 mm | 12. Maximum vertical wall digging depth | 2132 mm |