- Home/
- Comparison/
- Medium-Sized Excavator/
- Takeuchi TB175 vs. Link-Belt 75 Spin Ace
Takeuchi TB175 vs. Link-Belt 75 Spin Ace
12 reasons to buy Takeuchi TB175:
Sizes
Clearance | 356.6 mm and 356 mm | 0 % more or 0.6 mm |
Operation
Hydraulic system fluid volume | 132.1 l. and 95 l. | 28 % more or 37.1 l. |
Engine oil volume | 10.2 l. and 9.6 l. | 6 % more or 0.6 l. |
Fuel Capacity | 120 l. and 100 l. | 17 % more or 20 l. |
Hydraulic pump flow rate | 138.5 l/min and 143.1 l/min | 3 % less or 4.6 l/min |
Motor
Displacement | 3.3 l. and 3.1 l. | 6 % more or 0.2 l. |
Maximum torque | 250.8 Nm and 184.4 Nm | 26 % more or 66.4 Nm |
Carrier
Specific ground pressure | 31.7 kPa and 34 kPa | 7 % less or 2.3 kPa |
Maximum travel speed | 5.5 km/h and 4.8 km/h | 13 % more or 0.7 km/h |
Booms/sections features 1
Maximum vertical wall digging depth | 3861.8 mm and 3640 mm | 6 % more or 221.8 mm |
Maximum excavation depth | 4623.8 mm and 4140 mm | 10 % more or 483.8 mm |
Maximum radius along ground level | 7239 mm and 6390 mm | 12 % more or 849 mm |
7 reasons to buy Link-Belt 75 Spin Ace:
Swing device
Rotation speed | 10 rev / min and 7.6 rev / min | 24 % more or 2.4 rev |
Sizes
Width to outside of caterpillar track | 2320 mm and 2286 mm | 1 % more or 34 mm |
Operation
Cooling system fluid volume | 9.6 l. and 9.5 l. | 1 % more or 0.1 l. |
Generator current strength | 50 amperes and 40 amperes | 20 % more or 10 amperes |
Hydraulic system overflow valve pressure | 29371.6 kPa and 27503.2 kPa | 6 % more or 1868.4 kPa |
Motor
Torque measured at | 1800 rev / min and 1400 rev / min | 22 % more or 400 rev |
Booms/sections features 1
Maximum loading height | 5250 mm and 5233.4 mm | 0 % more or 16.6 mm |
Neutral reasons:
Sizes
Height to cab upper part | 2566.4 mm and 2700 mm |
Rear platform swing radius | 1728.2 mm and 1210 mm |
Caterpillar track length on ground level | 2185.4 mm and 2210 mm |
Operation
Working weight | 7815.4 kg and 7665.7 kg |
Operating voltage | 24 V and 12 V |
Motor
Cylinders number | 4 and 4 |
Manufacturer | Yanmar and Isuzu |
Model | 4TNV98 and CC-4JG1 |
Power measured at | 2100 rev / min and 2100 rev / min |
Carrier
Shoe dimensions | 446.5 mm and 450 mm |
Support rollers number on either side | 1 and 1 |
Rolling bearings number on either side | 5 and 5 |
Booms/sections features 1
Unit load-transfer length | 6681.2 mm and 5920 mm |
Images
Sizes
2. Width to outside of caterpillar track | 2286 mm | 2. Width to outside of caterpillar track | 2320 mm |
4. Caterpillar track length on ground level | 2185.4 mm | 4. Caterpillar track length on ground level | 2210 mm |
5. Clearance | 356.6 mm | 5. Clearance | 356 mm |
7. Height to cab upper part | 2566.4 mm | 7. Height to cab upper part | 2700 mm |
8. Rear platform swing radius | 1728.2 mm | 8. Rear platform swing radius | 1210 mm |
Carrier
14. Shoe dimensions | 446.5 mm | 14. Shoe dimensions | 450 mm |
Booms/sections features 1
10. Maximum loading height | 5233.4 mm | 10. Maximum loading height | 5540 mm |
11. Maximum radius along ground level | 7239 mm | 11. Maximum radius along ground level | 6770 mm |
12. Maximum vertical wall digging depth | 3861.8 mm | 12. Maximum vertical wall digging depth | 4100 mm |
13. Maximum excavation depth | 4623.8 mm | 13. Maximum excavation depth | 4540 mm |
1. Unit load-transfer length | 6681.2 mm | 1. Unit load-transfer length | 5970 mm |