vs.

      Volvo ECR58 vs. Caterpillar 305C CR

      19 reasons to buy Volvo ECR58:

      Swing device

      Rotation speed 10 rev / min and 9 rev / min 10 % more or 1 rev

      Sizes

      Counterweight ground clearance 670 mm and 615 mm 8 % more or 55 mm
      Clearance 370 mm and 340 mm 8 % more or 30 mm
      Width to outside of caterpillar track 2000 mm and 1980 mm 1 % more or 20 mm

      Operation

      Hydraulic system fluid volume 90 l. and 78 l. 13 % more or 12 l.
      Engine oil volume 11.5 l. and 7 l. 39 % more or 4.5 l.
      Generator current strength 55 amperes and 50 amperes 9 % more or 5 amperes
      Hydraulic pump flow rate 129.8 l/min and 130 l/min 0 % less or 0.2 l/min

      Motor

      Displacement 3.1 l. and 2.5 l. 19 % more or 0.6 l.
      Full power 38.8 kW and 36.7 kW 5 % more or 2.1 kW
      Effective power 37.9 kW and 35 kW 8 % more or 2.9 kW

      Booms/sections features 2

      Maximum excavation depth 4000 mm and 3890 mm 3 % more or 110 mm
      Maximum radius along ground level 6320 mm and 6050 mm 4 % more or 270 mm
      Maximum loading height 4210 mm and 4050 mm 4 % more or 160 mm
      Maximum vertical wall digging depth 3260 mm and 2940 mm 10 % more or 320 mm

      Booms/sections features 1

      Maximum excavation depth 3600 mm and 3490 mm 3 % more or 110 mm
      Maximum radius along ground level 5940 mm and 5650 mm 5 % more or 290 mm
      Maximum loading height 3970 mm and 3800 mm 4 % more or 170 mm
      Maximum vertical wall digging depth 2910 mm and 2530 mm 13 % more or 380 mm

      5 reasons to buy Caterpillar 305C CR:

      Operation

      Fuel Capacity 72 l. and 65 l. 10 % more or 7 l.
      Cooling system fluid volume 11 l. and 6.5 l. 41 % more or 4.5 l.
      Hydraulic system overflow valve pressure 24500 kPa and 24014.4 kPa 2 % more or 485.6 kPa

      Motor

      Power measured at 2400 rev / min and 2100 rev / min 12 % more or 300 rev

      Carrier

      Maximum travel speed 4.6 km/h and 4.3 km/h 7 % more or 0.3 km/h

      Neutral reasons:

      Sizes

      Height to cab upper part 2580 mm and 2550 mm
      Rear platform swing radius 1000 mm and 990 mm
      Caterpillar track length on ground level 1950 mm and 2580 mm

      Operation

      Working weight 5468.5 kg and 5320 kg
      Operating voltage 12 V and 12 V

      Motor

      Cylinders number 4 and 4
      Manufacturer Volvo and Mitsubishi
      Model D3.1 and S4Q2-T

      Carrier

      Track width 1600 mm and 1580 mm
      Shoe dimensions 400 mm and 400 mm

      Booms/sections features 2

      Maximum cut height 5850 mm and 5630 mm
      Unit load-transfer height 2580 mm and 2550 mm
      Unit load-transfer length 5600 mm and 5460 mm

      Booms/sections features 1

      Unit load-transfer length 5600 mm and 5330 mm
      Maximum cut height 5610 mm and 5370 mm
      Unit load-transfer height 2580 mm and 2550 mm

      Images

      Sizes

      2. Width to outside of caterpillar track 2000 mm 2. Width to outside of caterpillar track 1980 mm
      4. Caterpillar track length on ground level 1950 mm 4. Caterpillar track length on ground level 2580 mm
      5. Clearance 370 mm 5. Clearance 340 mm
      7. Height to cab upper part 2580 mm 7. Height to cab upper part 2550 mm
      8. Rear platform swing radius 1000 mm 8. Rear platform swing radius 990 mm
      15. Counterweight ground clearance 670 mm 15. Counterweight ground clearance 615 mm

      Carrier

      6. Track width 1600 mm 6. Track width 1580 mm
      14. Shoe dimensions 400 mm 14. Shoe dimensions 400 mm

      Booms/sections features 1

      10. Maximum loading height 4210 mm 10. Maximum loading height 3800 mm
      11. Maximum radius along ground level 6320 mm 11. Maximum radius along ground level 5650 mm
      12. Maximum vertical wall digging depth 3260 mm 12. Maximum vertical wall digging depth 2530 mm
      13. Maximum excavation depth 4000 mm 13. Maximum excavation depth 3490 mm
      1. Unit load-transfer length 5600 mm 1. Unit load-transfer length 5460 mm
      3. Unit load-transfer height 2580 mm 3. Unit load-transfer height 2550 mm
      9. Maximum cut height 5850 mm 9. Maximum cut height 5630 mm