vs.

      Case CX14 vs. Takeuchi TB014

      5 reasons to buy Case CX14:

      Swing device

      Rotation speed 10.7 rev / min and 9 rev / min 16 % more or 1.7 rev

      Operation

      Hydraulic pump flow rate 29.5 l/min and 42.9 l/min 31 % less or 13.4 l/min

      Carrier

      Specific ground pressure 21.4 kPa and 28.6 kPa 25 % less or 7.2 kPa
      Maximum travel speed 3.7 km/h and 2.3 km/h 38 % more or 1.4 km/h

      Booms/sections features 1

      Maximum vertical wall digging depth 1840 mm and 1700.8 mm 8 % more or 139.2 mm

      13 reasons to buy Takeuchi TB014:

      Sizes

      Clearance 221 mm and 175 mm 21 % more or 46 mm
      Width to outside of caterpillar track 3709.4 mm and 1200 mm 68 % more or 2509.4 mm

      Operation

      Hydraulic system overflow valve pressure 18140.1 kPa and 143.1 kPa 99 % more or 17997.0 kPa
      Engine oil volume 11.4 l. and 3.3 l. 71 % more or 8.1 l.
      Fuel Capacity 23.1 l. and 15.1 l. 35 % more or 8.0 l.
      Cooling system fluid volume 12.5 l. and 2.5 l. 80 % more or 10.0 l.
      Hydraulic system fluid volume 32.9 l. and 17 l. 48 % more or 15.9 l.

      Motor

      Power measured at 2100 rev / min and 2000 rev / min 5 % more or 100 rev
      Torque measured at 1700 rev / min and 1500 rev / min 12 % more or 200 rev
      Maximum torque 51 Nm and 46.1 Nm 10 % more or 4.9 Nm

      Booms/sections features 1

      Maximum excavation depth 2133.6 mm and 2110 mm 1 % more or 23.6 mm
      Maximum radius along ground level 3758.2 mm and 3680 mm 2 % more or 78.2 mm
      Maximum loading height 2667 mm and 2560 mm 4 % more or 107 mm

      Neutral reasons:

      Sizes

      Height to cab upper part 2200 mm and 2286 mm
      Rear platform swing radius 590 mm and 1087.1 mm
      Caterpillar track length on ground level 1210 mm and 1016 mm

      Operation

      Operating voltage 12 V and 12 V
      Generator current strength 20 amperes and 20 amperes
      Working weight 1469.6 kg and 1455.1 kg

      Motor

      Manufacturer Yanmar and Yanmar
      Model 3TNE68 and 3TNE-68
      Cylinders number 3 and 3

      Carrier

      Shoe dimensions 230 mm and 228.6 mm
      Rolling bearings number on either side 3 and 3

      Booms/sections features 1

      Maximum cut height 3630 mm and 3709.4 mm

      Images

      Sizes

      2. Width to outside of caterpillar track 1200 mm 2. Width to outside of caterpillar track 3709.4 mm
      4. Caterpillar track length on ground level 1210 mm 4. Caterpillar track length on ground level 1016 mm
      5. Clearance 175 mm 5. Clearance 221 mm
      7. Height to cab upper part 2200 mm 7. Height to cab upper part 2286 mm
      8. Rear platform swing radius 590 mm 8. Rear platform swing radius 1087.1 mm

      Carrier

      14. Shoe dimensions 230 mm 14. Shoe dimensions 228.6 mm

      Booms/sections features 1

      9. Maximum cut height 3630 mm 9. Maximum cut height 3709.4 mm
      10. Maximum loading height 2560 mm 10. Maximum loading height 2667 mm
      11. Maximum radius along ground level 3680 mm 11. Maximum radius along ground level 3758.2 mm
      12. Maximum vertical wall digging depth 1840 mm 12. Maximum vertical wall digging depth 1700.8 mm
      13. Maximum excavation depth 2110 mm 13. Maximum excavation depth 2133.6 mm